Endless belts 75 x 457 mm, P60, 3 pcs. 58T361 by GRAPHITE are designed for machine use and work with belt sanders. They have a backing made of paper and an electrocorundum coating. GRAPHITE brand belts are suitable for metal, wood, plastic and plasterboard. They will prove their worth in many tasks.
Velcro sanding papers, iron 102 x 152 mm, P60, 5 pieces, with 11 holes 58T301 by GRAPHITE is a set of 5 pieces of Velcro sanding papers, 102 x 152 mm. They are characterised by a cut-out in the shape of a so-called iron - with the possibility of detaching one of the parts and fitting it to a sander with a delta foot. The accessories have a paper backing and an electro-corundum coating. They are designed for machine use. With 11 holes on the surface, they allow them to be used on sanders equipped with a dust extraction system. The Velcro attachment allows for quick and easy changing of the GRAPHITE sanding sheets. They are suitable for use on wood, metal, plastic, glass and plasterboard.
Endless belts 75 x 533 mm, P100, 3 pcs. 58T369 by GRAPHITE are designed for machine use and work with belt sanders. They have a backing made of paper and an electrocorundum coating. GRAPHITE brand belts are suitable for metal, wood, plastic and plasterboard. They will prove their worth in many tasks.
Velcro sanding papers, iron 102 x 152 mm, P180, 5 pieces, with 11 holes 58T306 by GRAPHITE is a set of 5 pieces of Velcro sanding papers, 102 x 152 mm. They are characterised by a cut-out in the shape of a so-called iron - with the possibility of detaching one of the parts and fitting it to a sander with a delta foot. The accessories have a paper backing and an electro-corundum coating. They are designed for machine use. With 11 holes on the surface, they allow them to be used on sanders equipped with a dust extraction system. The Velcro attachment allows for quick and easy changing of the GRAPHITE sanding sheets. They are suitable for use on wood, metal, plastic, glass and plasterboard.
Sanding sponge 70 x 25 x 100 mm, P150, 58T164 by GRAPHITE is a sponge designed for hand sanding and finishing. Used for smoothing putty, drywall, plaster, paint, plastics, wood, metal and varnish coatings. The abrasive grain made of electro-corundum is located on four sides of the sponge. The soft structure allows it to conform to the shape of the surface to be sanded, and for hard-to-reach areas, the sponge can be easily cut into smaller pieces. Thanks to its thickness and flexibility, the GRAPHITE sanding sponge distributes the pressure of the hand evenly, avoiding localised depressions and scratches.
Water sandpaper 230 x 280 mm, P500, 58T222 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible latex C backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
Velcro sanding discs 125 mm, P100, 5 pieces, with 8 holes 58T291 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 125 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
Velcro sanding discs 150 mm, P180, 5 pieces, without holes 58T177 by GRAPHITE are discs without holes for metal, wood and plastic. Gradation P180 - fine grade - allows appropriate sanding according to the needs and surface preparation stage. The backing made of type C paper is suitable for machine use. The electro-corundum abrasive coating ensures high efficiency, and the Velcro fastening allows GRAPHITE discs to be changed quickly and conveniently.
Sanding cloth 230 x 280 mm, P80, 58T345 by GRAPHITE is an accessory with full grain electro-corundum and flexible JF backing. It has 100% coverage and contains a synthetic resin bond. It will work well with plasterboard, wood, metal and plastics. GRAPHITE brand sanding canvas is recommended for pre-smoothing coatings.
Sanding cloth 230 x 280 mm, P36, 58T341 by GRAPHITE is an accessory with full grain electro-corundum and flexible JF backing. It has 100% coverage and contains a synthetic resin bond. It will work well with plasterboard, wood, metal and plastics. GRAPHITE brand sanding canvas is recommended for coarse coating removal.
Sanding grid white 115 x 280 mm, P220 58T146 by GRAPHITE recommended for handheld applications with wood, metal, plastic, glass and plasterboard. It is characterised by its double-sided grit and white grain of fine electro-corundum. It is a waterproof, easy-to-clean GRAPHITE mesh that flexibly adapts to the surface. Thanks to its double-sided grit, it is economical and efficient to work with. It will prove its worth in many tasks.
Water sandpaper 230 x 280 mm, P240, 58T217 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible C latex backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
Yellow sanding paper in roll 2.5 m x 115 mm, P120, 58T424 by GRAPHITE is a product designed for sanding surfaces such as metal, wood, plastic and plasterboard. Made on a D-paper base, it is characterised by high durability and resistance to tearing. Thanks to its open grain, in which the surface is coated with 50-60% electro-corundum abrasive grain, the paper offers greater resistance to sanding dust clogging. It can be used for both hand and machine sanding - including with orbital sanders and gypsum sanding trowels.
Water sandpaper 230 x 280 mm, P2500, 58T231 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible C latex backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
Sanding discs, perforated, on Velcro with holes 225 mm, P40, 5 pieces 58T270 by GRAPHITE is a set of 5 pieces of sanding discs, designed for sanding plaster and drywall. It is compatible with "giraffe" type sanders and cantilever devices, with a diameter of 225 mm. GRAPHITE discs are equipped with perforated holes on the entire surface, so that the sanding dust is discharged smoothly during work. At the same time, the work surface does not get too hot during sanding, and the Velcro attachment allows the worn accessory to be quickly replaced. They are characterised by the grain of electro-corundum and the open type of grit. GRAPHITE brand abrasive discs are recommended for many tasks.
Sanding grid white 115 x 280 mm, P80 58T141 by GRAPHITE recommended for handheld applications with wood, metal, plastic, glass and plasterboard. It is characterised by its double-sided grit and white grain of fine electro-corundum. It is a waterproof, easy-to-clean GRAPHITE mesh that flexibly adapts to the surface. Thanks to its double-sided grit, it is economical and efficient to work with. It will prove its worth in many tasks.
Water sandpaper 230 x 280 mm, P100, 58T212 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible latex C backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
Velcro sanding discs 125 mm, P240, 5 pieces, with 8 holes 58T296 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 125 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
Sanding canvas in roll 2.5 m x 115 mm, P220, 58T446 by GRAPHITE is an accessory for sanding metal, wood, plastic and plasterboard. The product is made on the basis of J-type canvas, which is characterised by high flexibility and durability. The abrasive has a solid blank - 100% of the surface is covered with abrasive grain (electrocorundum), ensuring effective sanding. GRAPHITE brand canvas is designed for hand sanding.
Water sandpaper 230 x 280 mm, P1000, 58T225 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible latex C backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
