Äskettäin katsotut tuotteet
43-E-03785
Ezychange kiirvahetussüsteem lihtsustab nii augusae kui ka juhtpuuri vahetamist. Süsteemne lukustus ei vaja tööriistu ja osade vahetus toimub lihtsalt lahti tõmmates ja kokku lükates. Augusae külgedel olevad avad lihtsustavad välispidist tolmueemaldamist.
62-07-Y0339
PENOSIL AquaBrake Fabric 435 is a polyester-based reinforcement fabric designed for hydro-insulating walls and floors in wet and humid areas such as:
- Bathrooms
- Saunas
- Kitchens
- Balconies
- Terraces
It enhances the performance of waterproofing mastics and sealants, ensuring a watertight and flexible sealing layer that bridges cracks and prevents moisture penetration.
Key Features:
- Completely watertight
- Elastic and vapour impermeable
- Crack-bridging capability
- Suitable for heated floors
- Easy to cut and shape
- Compatible with Penosil AquaBrake Fiber 640 mastic
- For interior and exterior use
Applications:
Floor drains
Pipe penetrations
Wall and floor joints
Corners
Installation Instructions:
- Cut the fabric to the required size, allowing 5–7 cm overlap at edges.
- Apply the first layer of Penosil AquaBrake Fiber 640 mastic.
- Press the fabric into the fresh mastic using a putty trowel, avoiding air bubbles.
- Cover with a second layer of mastic, ensuring full immersion.
Special Reinforcement Guidelines:
- Corners: Use at least a 20 cm wide strip.
- Joints: Use at least a 10 cm wide strip.
- Floor traps: Use fabric at least 3× the diameter of the opening, preferably in two layers.
- Pipe penetrations: Cut fabric with a diameter 3× larger than the pipe. Make a hole 4–5 mm smaller than the pipe diameter so the fabric overlaps the pipe by 3–5 mm.
Surface Preparation:
- Surfaces must be clean, dry, and free of dust, loose particles, and oil residues.
- Prime concrete, cement, and plaster surfaces with PENOSIL BetPrimer 603.
