Käsityökalut

• Application: Cuts soft, hard and piano wire, as well as bolts, nails, rivets up to Ø 5.2 mm.
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened.
• Cutting edges: Induction-hardened, cutting edge hardness approx. 64 HRC.
• Special feature: Recess in the cutting edge for easier cutting of thicker wires; prevents slipping.
• Handles: Plastic-coated, ergonomic design.
• Additional function: Gripping surface below the joint for pulling wires from Ø 1.0 mm.
• Dimensions: Length 200 mm, width 46 mm, height 16 mm.
• Weight: approx. 330 g.
• Cutting capacities:

    Soft wire: Ø 6.0 mm

    Medium hard wire: Ø 5.2 mm

    Hard wire: Ø 4.0 mm

    Piano wire: Ø 3.6 mm

• Application: Special cutter for concrete mesh and structural steel, including steel lying flat.
• Material: Cutter head made of chrome vanadium heavy-duty steel, forged and multi-stage oil-hardened; joint made of special tool steel, forged.
• Cutting edges: Induction-hardened, cutting edge hardness approx. 62 HRC.
• Features:

    Very flat head and joint area for good accessibility.

    Recessed cutting edges for secure material grip.

    High cutting performance with minimum effort due to optimum     coordination of cutting edge angle and transmission ratio.

    Precise adjustment (12 positions) by eccentric bolt.

    Bolted cutter head, replaceable.

    Forged-in stopper with elastomer shock absorber.

• Handles: Steel tube, powder-coated, sturdy non-slip two-color multi-component grips; ergonomically angled.
• Finish: Grey atramentized.
• Dimensions: Length 950 mm, width 180 mm, height 40 mm.
• Weight: approx. 4.11 kg.
• Cutting capacities:

        
HRC 19: Ø 11 mm

HRC 40: Ø 9 mm

HRC 48: Ø 6 mm

• Cutting edge length: 44 mm.

• Application: Designed for cutting molded plastic components from sprues and other soft materials such as lead; ideal for injection molding finishing.
• Cutting edge: Fully flush (no bevel) for smooth, clean cuts with minimal post-processing.
• Material: Vanadium electric steel, forged and oil-hardened.
• Features: Opening spring for user comfort during repetitive tasks.
• Handles: Plastic-coated, non-slip.
• Finish: Polished head.
• Dimensions: Length 140 mm, width 47 mm, height 13 mm.
• Weight: approx. 120–125 g.
• Advantages:

    Compact and stable design.

    Perfect for flush cutting sprues directly on molded parts.

    Surface-ground cutting edges for precise, smooth cuts.

• Application: Designed for cutting molded plastic components from sprues and other soft materials such as lead; ideal for injection molding finishing.
• Cutting edge: Fully flush (no bevel) for smooth, clean cuts with minimal post-processing.
• Material: Vanadium electric steel, forged and oil-hardened.
• Features:

    Opening spring for user comfort during repetitive tasks.

    Improved transmission ratio for 25% more cutting performance.

• Handles: Plastic-coated, non-slip.
• Finish: Polished head.
• Dimensions: Length 160 mm, width 50 mm, height 15 mm.
• Weight: approx. 164 g.
• Advantages:

    Compact and stable design.

    Perfect for flush cutting sprues directly on molded parts.

    Surface-ground cutting edges for precise, smooth cuts

• Application: Designed for cutting molded plastic components from sprues and other soft materials such as lead; ideal for injection molding finishing.
• Cutting edge: Fully flush (no bevel) for smooth, clean cuts with minimal post-processing.
• Material: Vanadium electric steel, forged and oil-hardened.
• Features: Opening spring for user comfort during repetitive tasks.
• Handles: Plastic-coated, non-slip.
• Finish: Polished head.
• Dimensions: Length 180 mm, width 49 mm, height 14 mm.
• Weight: approx. 193 g.
• Advantages:

    Compact and stable design.

    Perfect for flush cutting sprues directly on molded parts.

    Surface-ground cutting edges for precise, smooth cuts.

• Compact diagonal cutter for very tough, continuous use
• High cutting performance with minimum effort thanks to optimized cutting edge angle and leverage ratio
• Precision cutting edges, induction-hardened (approx. 64 HRC), suitable for all wire types including piano wire
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened
• Length: 160 mm
• Weight: approx. 178 g
• Standard: DIN ISO 5749
• Cutting capacities:

    Medium-hard wire: Ø 3.4 mm

    Hard wire: Ø 2.5 mm

    Piano wire: Ø 2.0 mm

• Handles: plastic-coated, ergonomic design
• Advantages: 20% less effort compared to standard diagonal cutters, ideal for constant use

Description:

Precision pliers designed for ultra-fine cutting tasks in electronics and fine mechanics. The ESD version features handles that safely discharge electrostatic energy, protecting sensitive electronic components.

Key Features:

Cutting edges: Ground, very sharp, without bevel – ideal for flush cutting

Cutting edge hardness: Approx. 54 HRC

Material: INOX stainless steel (surgical grade)

Cutting type: Shear cut with controlled micro cutting edge misalignment for precision and durability

Joint: Stainless steel rivet for smooth operation

Handles: Multi-component ESD-safe grips

Opening spring and limiter: For ergonomic use and reduced fatigue

Precision tips: Allow cutting wires as thin as Ø 0.2 mm close to surfaces

Cutting Capacities:

Soft wire: Ø 0.2 – 1.6 mm

Medium hard wire: Ø 1.0 mm

Dimensions:

Length: 125 mm

Jaw length (B): 9 mm

Jaw thickness (D): 7.5 mm

Head width (A): 13.5 mm

Weight: 56 g

Compliance:

Standard: DIN ISO 9654

REACH: Compliant (no SVHC)

RoHS: Not applicable

• Very precise diagonal cutter for electronics and fine work
• Cutting edges induction-hardened, suitable for fine wires and components
• Material: Chrome vanadium electric steel, forged, multi-stage oil-hardened
• Length: 140 mm
• Weight: approx. 100 g
• Cutting capacities:

    Soft wire: Ø 1.6 mm

    Medium-hard wire: Ø 1.0 mm

• Handles: multi-component grips, ergonomic design
• Advantages: Extremely precise cut, ideal for electronics and delicate work

Precision side cutter for ultra-fine cutting work, ideal for electronics and fine mechanics, with ESD-safe handles.

Key Features:

15 mm longer version for greater stability and cutting performance

Precision-ground cutting edges without bevel for flush cutting

Shear cut with micro cutting edge misalignment for long service life

INOX surgical steel, rustproof and durable

Cutting edge hardness approx. 54 HRC

Precision tips cut wires from Ø 0.2 mm close to surfaces

Opening spring and limiter for ergonomic, fatigue-free work

Extremely smooth movement thanks to stainless steel rivet joint

Multi-component grips, ESD-safe

Technical Specifications:

Length: 140 mm

Weight: 77 g

Jaw length (B): 12.3 mm

Jaw thickness (D): 9.2 mm

Head width (A): 15.7 mm

Standards: DIN ISO 9654, DIN EN 61340-5

REACH: Compliant (no SVHC)

RoHS: Not applicable

Cutting capacity:

Soft wire: Ø 0.2 – 2.1 mm

Medium-hard wire: Ø up to 1.2 mm

VDE-tested precision pliers for ultra-fine cutting work in electronics and fine mechanics, designed for safe use on live parts up to 1000 V.

Key Features:

Cutting edges: Ground, extremely sharp, without bevel – for flush cutting

Cutting type: Shear cut with controlled micro cutting edge misalignment for precise cuts and long service life

Material: INOX tool steel, polished

Cutting edge hardness: Approx. 54 HRC

Joint: Stainless steel rivet for smooth movement and durability

Handles: Insulated with multi-component grips, VDE-tested

Spring mechanism: Includes opening spring and limiter for ergonomic, fatigue-free work

Precision tips: Cut wires close to surfaces from Ø 0.2 mm

Technical Specifications:

Length: 125 mm

Weight: 60 g

Dimensions: 125 × 78 × 18 mm

Jaw length (B): 9 mm

Jaw thickness (D): 7.5 mm

Head width (A): 13.5 mm

Cutting capacity:

Soft wire: Ø 0.2 – 1.6 mm

Medium-hard wire: Ø up to 1.0 mm

Compliance:

Standards: DIN ISO 9654, DIN EN 60900, IEC 60900

REACH: Compliant (no SVHC)

RoHS: Not applicable

This tool is ideal for professionals working in electrical engineering and electronics, offering precision, safety, and comfort for demanding tasks.

Features:

• Very sharp cutting edges without bevel – for flush cuts
• Cutting capacity: soft wire up to Ø 1.6 mm, medium hard wire up to Ø 1.0 mm
• Cutting edge hardness: approx. 54 HRC
• Made of INOX tool steel (surgical stainless steel)
• Opening spring and limiter – smooth operation
• Lead catcher – prevents uncontrolled loss of wire ends
• Weight: 57 g
• Dimensions: 125 x 48 x 12 mm
• Complies with DIN ISO 9654
• REACH compliant (does not contain SVHC)

Precision pliers for ultra-fine cutting work, ideal for electronics and fine mechanics.

Key Features:

Cutting edges: Ground, extremely sharp, without bevel – designed for flush cutting.

Precision tips: Shaped to cut wires close to surfaces, even as thin as Ø 0.2 mm.

Cutting type: Shear cut with controlled micro cutting edge misalignment for precise cuts and long tool life.

Material: Special tool steel, burnished.

Hardness: Cutting edge hardness approx. 60 HRC (induction-hardened).

Joint: Stainless steel rivet for durability.

Handles: Multi-component grips for comfort and control.

Spring mechanism: Includes opening spring and limiter for ease of repetitive work.

Movement: Extremely smooth for minimal operator fatigue.

Head design: Narrow head for working in tight spaces, such as densely packed circuit boards.

Technical Specifications:

• Length: 125 mm
• Weight: 55 g
• Dimensions: 125 x 60 x 13 mm
• Jaw length (B): 9 mm
• Jaw thickness (D): 7.5 mm
• Head width (A): 12.5 mm

Cutting capacity:
Soft wire: Ø 0.2 – 1.0 mm

Compliance:

Standard: DIN ISO 9654

REACH: Compliant (no SVHC)

RoHS: Not applicable

This model is especially valued by professionals in electronics, mechatronics, and precision engineering for its accuracy, ergonomic design, and long-lasting performance.

Precision diagonal cutting pliers designed for ultra-fine cutting work in electronics and fine mechanics, with ESD-safe handles for electrostatic discharge protection.

Key Features:

Cutting edges: Ground, extremely sharp, without bevel – for flush cutting.

Cutting type: Shear cut with controlled micro cutting edge misalignment for precise cuts and long service life.

Material: Special tool steel, burnished; induction-hardened cutting edges (approx. 62 HRC).

Handles: Multi-component grips, electrically dissipative (ESD) – safely discharge static electricity.

Joint: Stainless steel rivet for durability and smooth movement.

Spring mechanism: Includes opening spring and limiter for repetitive work.

Movement: Extremely smooth for minimal operator fatigue.

Precision tips: Cut wires close to surfaces, even as thin as Ø 0.2 mm.

Suitable for: Cutting soft wires, medium-hard wires, and even fiber optic cables.

Technical Specifications:

Length: 125 mm

Weight: 56 g

Dimensions: 125 × 70 × 13 mm

Jaw length (B): 9 mm

Jaw thickness (D): 7.5 mm

Head width (A): 13.5 mm

Cutting capacity:

Soft wire: Ø 0.2 – 1.6 mm

Medium-hard wire: Ø up to 1.2 mm

Compliance:

Standards: DIN ISO 9654, DIN EN 61 340-5

REACH: Compliant (no SVHC)

RoHS: Not applicable

This tool is ideal for professionals working with sensitive electronic components, offering precision, safety, and comfort

Precision side cutter for ultra-fine cutting work in electronics and fine mechanics, with ESD-safe handles for electrostatic discharge protection.

Key Features:

Extra-long version (140 mm) for greater stability and cutting performance

Precision-ground cutting edges without bevel for flush cutting

Shear cut with micro cutting edge misalignment for long service life

Special tool steel, burnished and oil-hardened in multiple stages

Cutting edge hardness approx. 64 HRC (induction-hardened)

Precisely shaped tips cut wires close to surfaces from Ø 0.2 mm

Opening spring and limiter for ergonomic, fatigue-free work

Smooth movement thanks to stainless steel rivet joint

Multi-component grips, ESD-safe (DIN EN 61340-5 compliant)

Technical Specifications:

Length: 140 mm

Weight: 85 g

Jaw length (B): 12.3 mm

Jaw thickness (D): 9.2 mm

Head width (A): 15.7 mm

Standards: DIN ISO 9654, DIN EN 61340-5

REACH: Compliant (no SVHC)

RoHS: Not applicable

Cutting capacity:

Soft wire: Ø 0.2 – 2.1 mm

Medium-hard wire: Ø up to 1.4 mm

• Very precise diagonal cutter for electronics and fine work
• VDE-tested insulation up to 1000 V according to IEC 60900
• Cutting edges induction-hardened, suitable for fine wires and components
• Material: Chrome vanadium electric steel, forged, multi-stage oil-hardened
• Length: 125 mm
• Weight: approx. 85 g
• Cutting capacities:

    Soft wire: Ø 1.6 mm

    Medium-hard wire: Ø 1.0 mm

• Handles: multi-component VDE insulation, ergonomic design
• Advantages: Extremely precise cut, ideal for electronics and electrical work

• Very precise diagonal cutter for electronics and fine work
• VDE-tested insulation up to 1000 V according to IEC 60900
• Cutting edges induction-hardened, suitable for fine wires and components
• Material: Chrome vanadium electric steel, forged, multi-stage oil-hardened
• Length: 125 mm
• Weight: approx. 85 g
• Cutting capacities:

    Soft wire: Ø 1.6 mm

    Medium-hard wire: Ø 1.0 mm

• Handles: multi-component VDE insulation, ergonomic design
• Advantages: Extremely precise cut, ideal for electronics and electrical work

• Very precise diagonal cutter for electronics and fine work
• VDE-tested insulation up to 1000 V according to IEC 60900
• Cutting edges induction-hardened, suitable for fine wires and components
• Material: Chrome vanadium electric steel, forged, multi-stage oil-hardened
• Length: 125 mm
• Weight: approx. 85 g
• Cutting capacities:

    Soft wire: Ø 1.6 mm

    Medium-hard wire: Ø 1.0 mm

• Handles: multi-component VDE insulation, ergonomic design
• Advantages: Extremely precise cut, ideal for electronics and electrical work

• Ideal for tightening and loosening siphon screw connections, plastic pipe fittings, and round union nuts
• Also suitable for gentle loosening of hoses on nozzles and filter cartridges
• Fine adjustment – 25 positions for perfect adaptation to various diameters
• Working capacity: Ø 25–80 mm
• Length: 250 mm
• Weight: approx. 375 g
• Material: Chrome vanadium electric steel, forged, oil-hardened
• Finish: Black atramentized, polished head
• Handles: with non-slip plastic coating
• Standard: DIN ISO 8976
• Advantages: Robust heavy-duty design, serrated gripping jaws, ergonomic handle geometry

• Ideal for tightening and loosening siphon screw connections, plastic pipe fittings, and round union nuts
• Also suitable for gentle loosening of hoses on nozzles and filter cartridges
• Fine adjustment – 25 positions for perfect adaptation to various diameters
• Working capacity: Ø 25–80 mm
• Length: 250 mm
• Weight: approx. 375 g
• Material: Chrome vanadium electric steel, forged, oil-hardened
• Finish: Black atramentized, polished head
• Handles: multi-component grips, non-slip
• Standard: DIN ISO 8976
• Advantages: Robust heavy-duty design, serrated gripping jaws, ergonomic handle geometry

• Ideal for tightening and loosening siphon screw connections, plastic pipe fittings, and round union nuts
• Also suitable for gentle loosening of hoses on nozzles and filter cartridges
• Fine adjustment – 25 positions for perfect adaptation to various diameters
• Working capacity: Ø 25–80 mm
• Length: 250 mm
• Weight: approx. 375 g
• Material: Chrome vanadium electric steel, forged, oil-hardened
• Finish: Black atramentized, polished head
• Handles: with non-slip plastic coating
• Standard: DIN ISO 8976
• Advantages: Robust heavy-duty design, serrated gripping jaws, ergonomic handle geometry