Step drills: 4-12, 4-20, 4-32 mm, TiN, set 3 pcs

Straight spade, metal handle, plastic handle 15G011-1 by VERTO is a straight type spade, characterised by an overall length of 1200 mm and a weight of 2 kg. It has a partially rubberised metal handle and a D-type plastic handle. The VERTO spade is powder-coated, ensuring multi-season durability and colour robustness. Recommended for a wide range of garden applications.

The 85 mm widia hole saw with SDS+ adapter and pilot drill 55H323 by GRAPHITE characterised by a hole saw diameter of 85 mm, a height of 72 mm and a drilling depth of 50 mm. It is equipped with 10 widia with a width of 2.2 mm. The inner diameter is 79 mm and the fi drill parameters are 8 x 110 mm. The length of the entire set is 163 mm. The GRAPHITE brand hole saw is offered in a set with an SDS+ adapter and a pilot drill bit. It has hammer drilling capability and is also designed for drilling holes in concrete and brick. It makes it possible to prepare holes for installation boxes. The fine-grain carbide blades with increased wear resistance extend the life of the tool. The hole saw will prove useful in the professions of builders, DIY enthusiasts and electricians.

SB SR work boots, steel toecap, size 40, 82-161-40 by NEO TOOLS are boots belonging to the SB SR category. Equipped with a steel toecap, knitted mesh upper, knitted mesh lining, EVA rubber sole and HI-POLY foam insole characterised by exceptional durability. NEO TOOLS half-boots are resistant to slipping on ceramic ground covered with sodium lauryl sulphate solution (SLS) and on steel ground covered with glycerol. The insoles provide protection against impacts with an energy equivalent to 200J, as well as resistance to oil, petrol and other organic solvents. The knitted upper is woven from a single thread, which contributes to the footwear's lightweight construction and very good fit to the foot. The product is CE certified. It is offered in a wide range of sizes. The SB SR work boots by NEO TOOLS are proven footwear for work and everyday use.

Colour matching lamp 2 in 1 + station and charger 99-098 by NEO equipped with LED: COB and a UV diode. It has a colour rendering index CRI>90 and is characterised by the following functions: COB warm - COB natural - COB cool - TOP UV LED-OFF, where the maximum output powers are: 380 lumens (warm) / 350 lumens (natural) / 390 lumens (cool). The operating time, on the other hand, is estimated to be between 4 and 4.5 hours, depending on the selected mode. The lamp has a 3.7V 4000 mAh battery and a 5V 1A power supply. The built-in type C charging port allows the device to be fully charged in 5 hours. The lamp for colour matching car paintwork under natural and UV light will be a must-have for any bodyshop. It will also prove useful in the case of coolant leaks, if the correct doped refrigerant is used beforehand. The unit has an IP67 waterproof rating. Its size is 185 x 50 x 32 mm and its weight (without base) is 245 g. The lamp is offered with a station, charger, hook and base magnet. Recommended for professionals as well as DIY enthusiasts.

Sanding canvas in roll 2.5 m x 115 mm, P60, 58T441 by GRAPHITE is an accessory for sanding metal, wood, plastic and plasterboard. The product is made on the basis of J-type canvas, which is characterised by high flexibility and durability. The abrasive has a solid blank - 100% of the surface is covered with abrasive grain (electrocorundum), ensuring effective sanding. GRAPHITE brand canvas is designed for hand sanding.