Korjaamovarusteet ja autotarvikkeet

• All main components of the compressor are manufactured by machining using numerically controlled machine tools, including suction regulator, separator block and minimum pressure valve
• The cooling takes place via a temperature-controlled centrifugal fan and an oversized combination cooler. This ensures optimal cooling even under the most extreme conditions.
• Generous access panels allow easy maintenance and immediate control of the internal components, reducing the time required for inspection and maintenance to one medium.
• The main operating parameters are monitored by the electronic microprocessor control NRG: In addition to the various functions, a weekly timer for switching on and off is available to meet the requirements of each customer. In addition, up to 4 machines can be controlled simultaneously according to the master / slave principle.
• Standard with star-delta connection

• Compressed air filters are used for highly efficient removal of solid particles, water, oil, aerosols, hydrocarbons, odors and vapors from compressed air systems.
• To achieve the required quality of compressed air, filters that gradually remove all types of solid and liquid contaminants from the compressed air must be installed in the compressed air line
• Your advantages through better quality compressed air:
• Safe filtration of both liquids such as water and aerosols as well as particles, dust and gases
• Better working and production conditions
• Optimum protection of connected tools and machines
• Improved product quality through reduction of rejects
• Protection of the compressed air system against contamination
• Increase of productivity by reduction of instant maintenance

• for separating solid contaminants up to 0.01μm
• Residual oil aerosol content up to 0.01 mg / m³ at 20 ° C and 1 bar
• Operating temperature 1.5 to 65 ° C
• absolute compressed air quality according to ISO 8573-1
• for safe separation of condensate and particles
• complete with filter element and float valve

• EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
• With star-delta switch
• High cooling effect and lower noise level due to thermostatically controlled radial fan
• Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirement via automatic message
• Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
• Screw compressor with wear-resistant Poly V ribbed belt drive and carriage tensioning system
• Easy maintenance due to easily accessible elements
• Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
• Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
• Small external dimensions, thus easy transport and installation

• Air flows directly through the cylinder and provides effective cooling
• Very smooth running and extremely quiet
• Low speed and thus long service life
• Compressor design with movable piston on connecting rod for high efficiency and long service life

• Compressor design with movable piston on the connecting rod forr high efficiency and long service life
• very smooth running and extremely quiet
• long service life due to low speed
• Maximum mechanical efficiency
• No transmission elements
• Air flows directly through the cylinder for effective cooling
• Highly efficient cooling air fan
• front and additional cooling for maximum durability
• reed valves for optimum efficiency
• anti-corrosive surface treatment

• Smooth-running, oil-free V-unit
• High-quality maximum equipment
• Compressed air lines and containers with a long service life
• Comfort safety quick couplings for maximum work safety
• Comfortable, back-friendly transport in an upright position and without lifting

• Designed for demanding continuous use when oil-free and clean compressed air is required
• Air is blown through the cooling chambers of the cylinder by means of a fan; thus optimum cooling is achieved
• Large piston, movably mounted, resulting in 60% more power compared to tilt piston systems
• Cylinder running surfaces with high-precision and micro-smooth surface for minimum friction
• The high-performance piston or piston ring made of a graphite-Teflon-carbon special compound has a much longer service life than a simple piston ring made of Teflon

• Filter pressure regulator for stepless adjustment of the working pressure, with simultaneous separation of dirt, oil and condensate
• One compressed air outlet each for filtered compressed air, filtered and oiled compressed air and a direct outlet on the compressed air tank
• Two comfort safety quick couplings
• High-quality CONDOR pressure switch
• One pressure gauge each for tank and working pressure
• Simple condensate drain via ball valve

• Flexible armored hose line with heat protection prevents vibration fractures
• Inside and outside hot-dip galvanized, corrosion-protected compressed air reservoir with 15-year warranty against rusting through

• One-hand safety couplings according to DIN EN 983 used by AIRCRAFT as the first manufacturer in series production
• Two separate locking systems for maximum working safety
• No whipping of the hose line during uncoupling

• Transport back-friendly in upright position and without lifting
• Additional transport handle directly on the container
• Puncture-proof PU foam wheels
• Stable steering chassis with parking brake

• Fully automatic on-off operation
• With all safety devices
• Completely ready for connection

• Ideal in combination with prefabricated solutions
• Permanently sealed without pressing
• Installation even in confined spaces
• Detachable fittings can be reused
• Cost savings through quick assembly

• Permanently sealed without pressing
• Cost savings through quick and easy assembly
• Ideal in combination with prefabricated solutions
• Compatible with other standards-compliant pipes
• No confusion of contours possible
• Installation even in confined spaces
• Extraction forces far beyond the requirements of the standard
• Pipe components can be dismantled and reused
• Numerous national and international approvals
• O-rings included

• Maximum mechanical efficiency
• No more drive parts required
• Reduction of moving components

• Top-efficient cooling air flow
• Special, ground valves made of stainless steel.

• With potential-free alarm contact

• Indication of whether the filter element is still functional or needs to be replaced - recommended replacement of the filter element from a pressure drop of 0.6 bar (beginning of the red area on the display)
• For mounting on the upper filter cover

• Maintenance-free direct drive
• Low space requirements and energy costs
• Low noise level
• Generously dimensioned cooler
• Easy installation and accessibility of all maintenance positions

Coaxial screw-type compressor with maintenance-free drive and maximum energy efficiency in all pressure ranges. Low compressor speeds and low load on the bearings of the patented direct drive ensure a very long service life.

• Prevents motor overload, reduces wear and makes for a longer service life
• Monitoring of operating hours, temperature and motor overload
• Phase sequence relays control the direction of rotation of the motor, thereby avoiding possible damage during commissioning or after relocation

• Low-noise centrifugal fan guarantees optimal operating temperatures even under unfavourable conditions
• Thermostatically and electronically controlled fan and generously sized heat exchanger result in a longer service life and less fluctuation in oil temperature

• Low noise, suitable for deployment in any work environment
• Small footprint facilitates transport and deployment
• Service-friendly thanks to optimum accessibility and easy removal and installation of all components that require maintenance
• All air and oil lines are made of heat-resistant rubber
• Equipped with a star delta circuitry as factory standard
• Ready to connect with all fittings and safety equipment

• More reliable compressed air system without costly downtimes and production delays while simultaneously ensuring product quality
• Fully integrated into the housing
• Ready for use without installation overhead
• Equipped with control panel and time-controlled condensate drain

• Compressed air tank according to AD 2000 / without fitting set / 11 and 16 bar
• Hot dip galvanized inside and outside
• Constructed in accordance with EC Directive 87/404 / EEC or PED 97/23 / EC -AD 2000, Module: H / H 1
• Operating conditions according to AD 2000 - S1 (10/2000) = arrivals and departures and 20% pressure fluctuation range
• ISO 9001:2015 certified manufacturer

• Sintered filter with centrifugal principle, diaphragm pressure regulator with secondary venting and micro-mist lubricator
• For compressed air and neutral gases
• Filter pressure regulator with semi-automatic condesate drain
• Mist lubricator for oil grade CL 32 to DIN 51517-ISO VG 32 - oil refill not possible under pressure
• For vertical installation

• Sintered filter with centrifugal principle, diaphragm pressure regulator with secondary venting and micro-mist lubricator
• For compressed air and neutral gases
• Filter pressure regulator with semi-automatic condensate drain
• Mist lubricator for oil grade CL 32 to DIN 51517-ISO VG 32 - oil refill not possible under pressure
• Inlet pressure 1, 5 - 12 bar
• Suitable for temperatures from -10 to +50°C
• For vertical installation

• Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
• Energy-efficient IE4 motor
• Rotation direction control for the motor, prevents damage during start-up or after a change of stand location
• High cooling effect and low noise level due to thermostatically controlled radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled radial fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Star-delta switching as standard
• Easy to service: simple removal and installation of all components requiring maintenance

• Thanks to patented technology, regular service is possible in only 30 seconds and without expensive cleaning
• Wall and floor mounting possible
• Works reliably with any steam trap
• Suitable for all common compressor oils
• Operating media: condensate (air, water, oil), non-aggressive, not suitable for emulsion
• Quick and clean change of the filter cartridge
• No settling tank necessary (no bacteria formation)
• Easy installation due to compact design and small dimensions
• Connection via quick couplings

• Multi-stage oil-water separation via an oil-attracting filter and activated carbon
• After the end of the service life of the filter element this is unscrewed and disposed of completely
• Filter element is tightly closed with plastic cover, so that residual condensate can remain in it
• Locked filter element can be disposed of according to current regulations

• after occurrence of one of the following three cases:
• 4,000 operating hours of the compressor at compressor oil transfer of 2.5 mg / m3
• Discoloration of the polypropylene medium - analysis by simple visual inspection
• At the latest after 12 months (regardless of the operating hours of the compressor)

• Compressed air filters are used for highly efficient removal of solid particles, water, oil, aerosols, hydrocarbons, odors and vapors from compressed air systems.
• To achieve the required quality of compressed air, filters that gradually remove all types of solid and liquid contaminants from the compressed air must be installed in the compressed air line
• Your advantages through better quality compressed air:
• Safe filtration of both liquids such as water and aerosols as well as particles, dust and gases
• Better working and production conditions
• Optimum protection of connected tools and machines
• Improved product quality through reduction of rejects
• Protection of the compressed air system against contamination
• Increase of productivity by reduction of instant maintenance

• for separating solid contaminants up to 0.01μm
• Residual oil aerosol content up to 0.01 mg / m³ at 20 ° C and 1 bar
• Operating temperature 1.5 to 65 ° C
• absolute compressed air quality according to ISO 8573-1
• for safe separation of condensate and particles
• complete with filter element and float valve

• 99% separation of the precipitated condensate directly after the compressor
• For separating large amounts of condensate (water, oil) and dirt particles by centrifugal acceleration of the compressed air
• Use on aftercoolers and refrigeration dryers
• High quality corrosion protection through complete anodization
• Low-flow housing made of seawater-resistant aluminum
• Outside additionally powder-coated
• Differential pressure < 0.06 bar
• With BEKOMAT® steam trap