All main components of the compressor are manufactured by machining using numerically controlled machine tools, including suction regulator, separator block and minimum pressure valve
The cooling takes place via a temperature-controlled centrifugal fan and an oversized combination cooler. This ensures optimal cooling even under the most extreme conditions.
Generous access panels allow easy maintenance and immediate control of the internal components, reducing the time required for inspection and maintenance to one medium.
The main operating parameters are monitored by the electronic microprocessor control NRG: In addition to the various functions, a weekly timer for switching on and off is available to meet the requirements of each customer. In addition, up to 4 machines can be controlled simultaneously according to the master / slave principle.
Standard with star-delta connection
Energy savings through frequency-controlled compressors Reducing energy consumption and protecting our precious energy resources has become a global challenge given its impact on the environment. The A-PLUS 22, 37, 55 and 75 kW range is also available in a speed control version that combines high performance with energy saving solutions. By using a variable speed compressor in a typical installation, you save a significant amount of energy. Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
With star-delta switch
High cooling effect and lower noise level due to thermostatically controlled radial fan
Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirement via automatic message
Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
Screw compressor with wear-resistant Poly V ribbed belt drive and carriage tensioning system
Easy maintenance due to easily accessible elements
Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
Small external dimensions, thus easy transport and installation
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Easy installation and accessibility of all maintenance positions
Coaxial screw-type compressor with maintenance-free drive and maximum energy efficiency in all pressure ranges. Low compressor speeds and low load on the bearings of the patented direct drive ensure a very long service life.
EasyTRONIC Micro II electronic control for reliability and efficiency
Prevents motor overload, reduces wear and makes for a longer service life
Monitoring of operating hours, temperature and motor overload
Phase sequence relays control the direction of rotation of the motor, thereby avoiding possible damage during commissioning or after relocation
Optimized cooling system
Low-noise centrifugal fan guarantees optimal operating temperatures even under unfavourable conditions
Thermostatically and electronically controlled fan and generously sized heat exchanger result in a longer service life and less fluctuation in oil temperature
User-friendly in all details
Low noise, suitable for deployment in any work environment
Small footprint facilitates transport and deployment
Service-friendly thanks to optimum accessibility and easy removal and installation of all components that require maintenance
All air and oil lines are made of heat-resistant rubber
Equipped with a star delta circuitry as factory standard
Ready to connect with all fittings and safety equipment
K models with Integrated refrigeration dryer
More reliable compressed air system without costly downtimes and production delays while simultaneously ensuring product quality
Fully integrated into the housing
Ready for use without installation overhead
Equipped with control panel and time-controlled condensate drain
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
All main components of the compressor are manufactured by machining using numerically controlled machine tools, including suction regulator, separator block and minimum pressure valve
The cooling takes place via a temperature-controlled centrifugal fan and an oversized combination cooler. This ensures optimal cooling even under the most extreme conditions.
Generous access panels allow easy maintenance and immediate control of the internal components, reducing the time required for inspection and maintenance to one medium.
The main operating parameters are monitored by the electronic microprocessor control NRG: In addition to the various functions, a weekly timer for switching on and off is available to meet the requirements of each customer. In addition, up to 4 machines can be controlled simultaneously according to the master / slave principle.
Energy savings through frequency-controlled compressors Reducing energy consumption and protecting our precious energy resources has become a global challenge given its impact on the environment. The A-PLUS 22, 37, 55 and 75 kW range is also available in a speed control version that combines high performance with energy saving solutions. By using a variable speed compressor in a typical installation, you save a significant amount of energy. Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Flow-optimized air supply for up to 75% less resistance
Assembly of the filter elements without cross-sectional narrowing and disturbing tie rods, thus reduced flow resistance and easy element change even in confined spaces
Cavity volume of the borosilicate filter material of 96% ensures the lowest pressure loss
CLEARPOINT® filter housing made of water-resistant aluminum and additionally anodised on the inside, therefore increased operational safety and reduced flow resistance due to permanently smooth inner surfaces
100% control when opening the filter housing by a secure locking mechanism, when opened under pressure a warning signal sounds
With thermally highly resistant (up to 120 ° C), mechanically highly resistant, chemically resistant and silicone-free needle felt drainage layer (in contrast to foam material of other filter makes)
Stable construction of the filter element - it is not possible to inflate or rupture the drainage layer, thereby ensuring the constant use of the entire filter surface
for the separation of oil vapors, odors and flavorings via adsorption and in the second stage of solid particles
Residual content of oil vapor up to 0.003 mg / m³ at 20 ° C and 1 bar
absolute compressed air quality according to ISO 8573-1
For compressed air of the highest quality, eg, for breathing air, in analytical technology or semi-luxury bottling
Pure compressed air in connection with upstream ultrafine filter
EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
With star-delta switch
High cooling effect and lower noise level due to thermostatically controlled radial fan
Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirement via automatic message
Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
Screw compressor with wear-resistant Poly V ribbed belt drive and carriage tensioning system
Easy maintenance due to easily accessible elements
Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
Small external dimensions, thus easy transport and installation
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
The two-stage, high performance, 2-cylinder unit provides very low RPM for smooth, low-vibration operation
Large fan for optimal cooling
Between- and aftercooler for a low tank inlet temperature and reduction of condensation
High quality electric motors equipped with motor protection switch
Ready for connection with all fittings such as safety valve and check valve, condensate and air release valve for autonomous operation
Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank
High quality CONDOR pressure switch for fully automatic on-off operation
Flexible armored hose line with heat protection prevents vibration break
Compressor compressors are used when:
the available air volume is too small
Peak performance needs to be met
10 0% safety must be warrantyd
Old equipment would require expensive repairs
We save for you - 13 bar instead of 15 bar!
Our 15 bar compressors are factory set to 13 bar shutdown pressure. The reason for this is that, according to experience, 90% of all users have an operating pressure of max. 13 bar
Any additional pressure generated means an energy consumption of about 8% per bar.
If you still need the maximum pressure of 15 bar, you can easily do it yourself at any time at the pressure switch.
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Innovative LOGIN control with 4.3" touch screen for easy operation and complete control over all functions
Connection of up to eight compressors possible, no matter if with constant or variable speed
All information on current operating status at a glance
Rotation direction control for the motor, prevents damage during start-up or after a change of location
Low noise emission (only max. 67 dB) during operation, due to extremely low speed of the screw compressor and use of a low-noise radial fan
Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
Aftercooler reduces the effort for drying and filtration of the generated compressed air
Service-friendly: easy removal and installation of all components requiring maintenance
Energy saving through frequency control
Ideal for frequently changing compressed air consumption
Compressor delivery rate adjusts to actual consumption
Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Innovative LOGIN control with 4.3" touch screen for easy operation and complete control over all functions
Connection of up to eight compressors possible, no matter if with constant or variable speed
All information on current operating status at a glance
Rotation direction control for the motor, prevents damage during start-up or after a change of location
Low noise emission (only max. 67 dB) during operation, due to extremely low speed of the screw compressor and use of a low-noise radial fan
Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
Aftercooler reduces the effort for drying and filtration of the generated compressed air
Star-delta switching as standard
Easy to service: simple removal and installation of all components requiring maintenance
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
For automatic, timed draining of condensate or other non-aggressive fluids from the compressed air system Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
