Army-fuel can (PRESSOL) with flexible spout. Spout is stored inside jerrycan. Spout with integrated ventilation. Cover cap is secured against loss with flexible band. No rusty splits in the fuel. Less water condensate in the jerrycan. 1,45 kg total weight instead of 4,85 kg of the metal version. Integral discharge spout to be stored in the jerry can complete with patented jerrycan locking cap. No contamination of the discharge spout when storing the jerrycan in a vehicle. Dimensions compatible with military jerrycans. Lower conductibility of temperature in comparison to metal version. Suitable for liquid fuels. Robust and resistant against impact.
Magnetic bowl, angular, diameter 150 mm 11-617 by NEO TOOLS is a practical accessory for every car workshop. The bowl is characterised by a diameter of 148 mm and a depth of 112 mm. Made of durable plastic, it has an 80 mm diameter magnet with a strength of 1000-1200 gauss. It is possible to attach it to vertical metal surfaces, such as mudguards or the doors of the car being repaired. The bowl is designed to hold metal small items on the work bench. Thanks to its high resistance to impact and mechanical deformation, it is ideal for better organisation of various tasks.
Oil pump, 18 l/min. for barrels 60 - 220 litres 11-565 by NEO TOOLS is a telescopic hand oil pump for barrels of: 60, 200 and 220 litres. It is characterised by dimensions of 800 x 90 x 90 mm. It has a PVC/NBR seal and its capacity is 18 litres per minute. The NEO TOOLS brand oil pump is designed for oil-based liquids, fuel oils, engine oil, diesel and purified paraffin. It works in field conditions in the absence of electrical power. It is recommended for do-it-yourselfers and mechanics.
The NEO TOOLS Mobile Oil Sinker, Gravity 10-810 is a gravity oil sinker, offering tank emptying pressures of 0.1 to 1 bar. It is characterised by a tank capacity of 70 litres and a beaker bowl capacity of 10 litres. The tool's sink bowl is made of 1.5 mm thick steel and weighs 2.5 kg. It has a diameter of 42 cm. The total weight of the beaker is 20 kg. The NEO TOOLS beaker is equipped with 4 castors, 2 of which are swivel castors. The possibility of adjusting the height of the bowl increases the potential of the product and adjusts it to different car models. The durable construction, in turn, allows for long-term use in garages and service workshops.
The TFSI engine oil plug spanner 11-383 by NEO is a tool characterised by a 1/4" drive square size. It is recommended for use on Audi, VW, Skoda and Seat cars manufactured after 2013 and with a 1.2, 1.4, 1.8, 2.0 TFSI petrol engine. The NEO oil plug spanner weighs only 0.07 kg, which makes it easy to handle. It facilitates the replacement of plugs, thus allowing you to take care of the good condition of your engines. It will prove useful in car workshops.
Workshop pressure washer, 1.5 litres 10-815 by NEO TOOLS is made from a robust combination of PP and PE plastic. Equipped with a stainless steel cord and a brass adjustable spray nozzle, it will find use in washing various types of dirty surfaces and equipment. The sprayer ensures even and comfortable spraying. Thanks to its resistance to solvents, it is ideal for use in workshop and automotive environments.
The NEO TOOLS mobile pneumatic oil beaker with control tank 10-811 is a device offering a tank emptying pressure of 1 to 3 bar and an operating pressure of 6 to 8 bar. The sink-puller is equipped with a 70-litre capacity tank and a 10-litre steel sink bowl with a thickness of 1.5mm, weight of 2.5kg and diameter of 42cm. The unit has a 10-litre graduated inspection tank and its total weight is 26 kg. The recommended operating temperature of the oil, on the other hand, is between 40 and a maximum of 60 degrees C. The NEO TOOLS oil beaker is equipped with 4 castors, including 2 swivel castors, offering convenient transport. The adjustable height allows the device to fit various car models, and the durable construction translates into long-lasting use. The large capacity tank and the additional possibility of sucking the old oil out of the oil sump, without having to unscrew the drain plug, as well as the practical inspection container - all contribute to the high popularity of this product in garages and service workshops. With the NEO TOOLS oil sump drainer, you will maintain cleanliness and tidiness while working with oil changes, and also have the possibility of visually assessing and checking the amount of oil collected. This is an indispensable device for professionals and automotive enthusiasts.
Tool set for plastic oil pans in TFSI engines 11-384 by NEO is a set of tools in 1/4" and 1/2" sizes recommended for use in Audi, VW, Skoda and Seat cars, over 2013 vintage and 1.2, 1.4, 1.8, 2.0 TFSI petrol engines. The set is offered in a practical case for easy transport and storage. The tools will be indispensable in every car workshop. They facilitate changing and are recommended for use when unscrewing oil sump plugs.
Fastening belt with ratchet 25 mm x 5 m, withstanding 300 kg PP 10-704 by NEO TOOLS is a belt characterised by a width of 25 mm and a length of 5 m. It is adapted for securing loads during transport or storage. Its durability is up to 300 kg. The fastening belt by NEO TOOLS is equipped with a robust tightening ratchet. It is made of PP. It is a certified product recommended for both amateur and professional use.
Fastening belt with ratchet 25 mm x 4.5 m, withstanding 260 kg PP 10-703 by NEO TOOLS is a belt characterised by a width of 25 mm and length of 4.5 m. It is adapted for securing loads during transport or storage. Its durability is up to 260 kg. The fastening belt by NEO TOOLS is equipped with a robust tightening ratchet. It is made of PP. It is a certified product recommended for amateur and professional use.
Belt with cam buckle 25 mm x 2.5 m 2 pieces 10-711 by NEO TOOLS is a robust belt for transporting and storing loads, equipped with a cam buckle. It is characterised by a width of 25 mm and a length of 2.5 m. It is made of durable PES material. Its strength is up to 500 kg/piece. The NEO TOOLS brand cam buckle belt is offered in two pieces for maximum safety.
Transport cables set of 8 pcs. 10-713 by NEO TOOLS is a set of 8 ropes for transporting and storing loads. Made of a durable combination of rubber and PP, they ensure proper stability and durability. The ropes are ended with practical hooks for easier assembly. They are characterised by their universal use.
Transport cables set of 6 pcs. 10-715 by NEO TOOLS is a set of 6 ropes for transporting and storing loads. Made of a durable combination of rubber and PP, they ensure proper stability and durability. The ropes are ended with practical hooks for easier assembly. They are characterised by their universal use.
The ratchet lashing belt 25 mm x 5 m, withstanding 1000 kg PES 10-709 by NEO TOOLS is a belt characterised by a width of 25 mm and a length of 5 m. It is adapted for securing loads during transport or storage. Its durability is up to 1000 kg. The fastening belt by NEO TOOLS is equipped with a robust tightening ratchet. It is made of PES. It is a certified product recommended for both amateur and professional use.
Fastening belt with ratchet 25 mm x 3 m, withstanding 260 kg PP 10-702 by NEO TOOLS is a belt characterised by a width of 25 mm and a length of 3 m. It is adapted for securing loads during transport or storage. Its durability is up to 260 kg. The fastening belt by NEO TOOLS is equipped with a robust tightening ratchet. It is made of PP. It is a certified product recommended for amateur and professional use.
The 25 mm x 3 m ratchet lashing strap, capable of withstanding 500 kg PES 10-705 by NEO TOOLS is a belt characterised by a width of 25 mm and a length of 3 m. It is adapted for securing loads during transport or storage. Its durability is up to 500 kg. The fastening belt by NEO TOOLS is equipped with a robust tightening ratchet. It is made of PES. It is a certified product recommended for both amateur and professional use.
The 38 mm x 6 m ratchet lashing belt, withstanding 2000 kg PES 10-710 by NEO TOOLS is a belt characterised by a width of 38 mm and a length of 6 m. It is adapted for securing loads during transport or storage. Its durability is up to 2000 kg. The fastening belt by NEO TOOLS is equipped with a robust tightening ratchet. It is made of PES. It is a certified product recommended for both amateur and professional use.
Transport cables set of 20 pcs. 10-714 by NEO TOOLS is a set of 20 ropes for transporting and storing loads. Made of a durable combination of rubber and PP, they ensure proper stability and durability. The ropes are ended with practical hooks for easier assembly. They are characterised by their universal use.
The 25 mm x 5 m ratchet lashing strap, withstanding 500 kg PES 10-707 by NEO TOOLS is a belt characterised by a width of 25 mm and a length of 5 m. It is adapted for securing loads during transport or storage. Its durability is up to 500 kg. The fastening belt by NEO TOOLS is equipped with a robust tightening ratchet. It is made of PES. It is a certified product recommended for both amateur and professional use.
The ratchet lashing belt 25 mm x 4 m, withstanding 1000 kg PES 10-708 by NEO TOOLS is a belt characterised by a width of 25 mm and a length of 4 m. It is adapted for securing loads during transport or storage. Its durability is up to 1000 kg. The fastening belt by NEO TOOLS is equipped with a robust tightening ratchet. It is made of PES. It is a certified product recommended for both amateur and professional use.
