Segmented diamond cutting disc, 115 x 22.2 mm, dry and wet 57T306 by GRAPHITE is a segmented dry and wet cutting disc with a diameter of 115 mm and a mounting hole of 22.2 mm. The cutting segment is 7 mm high and 2 mm wide. The maximum speed of the disc is 13 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting granite, concrete, brick, stone and marble.
Turbo diamond cutting wheel, 230 x 22.2 mm, dry 57T320 by GRAPHITE is a turbo dry cutting wheel with a diameter of 230 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.8 mm wide. The maximum speed of the disc is 6 600 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of EN 13236 and is designed for cutting stone, brick, marble, granite and concrete.
Segmented diamond cutting wheel, 180 x 22.2 mm, dry 57T310 by GRAPHITE is a segmented dry cutting wheel with a diameter of 180 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.4 mm wide. The maximum speed of the disc is 8 600 rpm, corresponding to 80 m/s. The GRAPHITE disc meets the requirements of EN 13236 and is designed for cutting granite, concrete, brick, stone and marble.
GRAPHITE's 57T323 diamond grinding wheel, 2 segments, 115 x 22.2 mm, dry 57T323 is equipped with two segments and designed for dry use. Reduction rings are included in the set. The segments are characterised by a height of 4.5 mm and a width of 8 mm. The maximum speed of the GRAPHITE disc is 13 600 rpm, equivalent to 80 m/s. The disc is designed for grinding concrete, cellular concrete, brick and stone. The holes in this accessory improve cooling while working and effectively remove dust and abrasive material. This makes grinding faster and more efficient. The diamond-coated segments ensure effective and efficient sanding. They wear evenly, which also guarantees consistent work quality. The segmented design improves heat dissipation and prevents the disc from overheating. GRAPHITE's product meets the requirements of EN 13236.
GRAPHITE's 57T325 diamond grinding wheel, 2 segments, 180 x 22.2 mm, dry 57T325 is equipped with two segments and designed for dry use. Reduction rings are included in the set. The segments are characterised by a height of 5 mm and a width of 8 mm. The maximum speed of the GRAPHITE disc is 8 600 rpm, equivalent to 80 m/s. The disc is designed for grinding concrete, cellular concrete, brick and stone. The holes in this accessory improve cooling during operation and effectively remove dust and abrasive material. This makes grinding faster and more efficient. The diamond-coated segments ensure effective and efficient sanding. They wear evenly, which also guarantees consistent work quality. The segmented design improves heat dissipation and prevents the disc from overheating. GRAPHITE's product meets the requirements of EN 13236.
Turbo diamond cutting wheel, 125 x 22.2 mm, dry and wet 57T318 by GRAPHITE is a dry and wet turbo diamond cutting wheel with a diameter of 125 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.2 mm wide. The maximum speed of the disc is 12 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of EN 13236 and is designed for cutting stone, brick, marble, granite and concrete.
The GRAPHITE 57T302 solid diamond cutting wheel, 180 x 22.2 mm, wet 57T302 is a solid diamond cutting wheel with a diameter of 180 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 5 mm high and 2.4 mm wide. The maximum speed of the disc is 8 600 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting terracotta, stoneware, granite and marble.
Segmented diamond cutting wheel, 230 x 22.2 mm, dry and wet 57T314 by GRAPHITE is a segmented dry and wet cutting wheel with a diameter of 230 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.4 mm wide. The maximum speed of the disc is 6 600 rpm, corresponding to 80 m/s. The GRAPHITE disc meets the requirements of EN 13236 and is designed for cutting granite, concrete, brick, stone and marble.
The GRAPHITE 57T301 solid diamond cutting wheel, 125 x 22.2 mm, wet 57T301 is a solid diamond cutting wheel with a diameter of 125 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 5 mm high and 2 mm wide. The maximum speed of the disc is 12 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting terracotta, stoneware, granite and marble.
Grinding wheel, corundum for metal 125 x 6 x 22.2 mm, 27 A24-R-BF, convex 57T114 by GRAPHITE marked type 27 A24-R-BF is a convex tool, designed for grinding metal. It has a diameter of 125 mm, a thickness of 6 mm and a mounting hole of 22.2 mm. The maximum speed is 12,200 rpm - with a simultaneous working speed of 80 m/s. The product meets the requirements of EN 12413, ensuring safety and quality work. The GRAPHITE brand sanding disc will be suitable for metalworking, workshop applications.
GRAPHITE's 57T327 diamond grinding wheel, turbo, 125 x 22.2 mm, dry 57T327 is designed for dry use. Reduction rings are included. The disc has a diameter of 125 mm and a mounting hole of 22.2 mm. The segment height is 4.5 mm, while its width is 20 mm. The maximum speed should not exceed 12,200 rpm - corresponding to a speed of 80 m/s. The tool is designed for grinding concrete, cellular concrete, brick and stone.The holes in the disc improve cooling during operation and facilitate the removal of dust and abrasive material. They effectively improve debris removal, which speeds up the grinding process. The diamond-coated segments ensure efficient and durable grinding, and their even wear ensures consistent performance over the entire service life. The segmented design promotes better heat dissipation, preventing the tool from overheating. The GRAPHITE-branded disc features a multi-segment arrangement with curved grooves that effectively guide the excavated material away from the work zone, increasing the speed and comfort of the work. The product complies with the EN 13236 standard.
Segmented diamond cutting wheel, 150 x 22.2 mm, dry 57T309 by GRAPHITE is a segmented dry cutting wheel with a diameter of 150 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.2 mm wide. The maximum speed of the disc is 10 000 rpm, corresponding to 80 m/s. The GRAPHITE disc meets the requirements of EN 13236 and is designed for cutting granite, concrete, brick, stone and marble.
GRAPHITE's 57T324 diamond grinding wheel, 2 segments, 125 x 22,2 mm, dry 57T324 is equipped with two segments and designed for dry use. Reduction rings are included in the set. The segments are characterised by a height of 4.5 mm and a width of 8 mm. The maximum speed of the GRAPHITE disc is 12,200 rpm, equivalent to 80 m/s. The disc is designed for grinding concrete, cellular concrete, brick and stone. The holes in this accessory improve cooling while working and effectively remove dust and abrasive material. This makes grinding faster and more efficient. The diamond-coated segments ensure effective and efficient sanding. They wear evenly, which also guarantees consistent work quality. The segmented design improves heat dissipation and prevents the disc from overheating. GRAPHITE's product meets the requirements of EN 13236.
GRAPHITE's 57T322 diamond grinding disc, 1 segment, 125 x 22.2 mm, dry 57T322 is equipped with one segment and designed for dry use. Reduction rings are included. The segment is characterised by a height of 4.5 mm and a width of 9.5 mm. The maximum speed of the GRAPHITE disc is 12,200 rpm, equivalent to 80 m/s. The disc is designed for grinding concrete, cellular concrete, brick and stone. The holes in this accessory improve cooling while working and effectively remove dust and abrasive material. This makes grinding faster and more efficient. The diamond-coated segments ensure effective and efficient sanding. They wear evenly, which also guarantees consistent work quality. The segmented design improves heat dissipation and prevents the disc from overheating. GRAPHITE's product meets the requirements of EN 13236.
Grinding discs 200 x 20/16/12.7 x 20 mm, P 60, 2 pieces 57T128 by GRAPHITE have an external diameter of 200 mm and a thickness of 20 mm. The set includes 2 pieces of accessories with a gradation of P 60. The inner diameter of the mounting hole is 12.7 mm, but reductions are included: from 20 to 16 mm and from 16 to 12.7 mm. GRAPHITE brand discs will work well for use on bench grinders. The maximum recommended speed for them is 3350 rpm. They are used for grinding metal, sharpening knives, chisels and other cutting tools, as well as machining and levelling metal surfaces.
Grinding wheel, corundum for metal 115 x 6 x 22.2 mm, 27 A24-R-BF, convex 57T113 by GRAPHITE marked type 27 A24-R-BF is a convex tool, designed for grinding metal. It has a diameter of 115 mm, a thickness of 6 mm and a mounting hole of 22.2 mm. The maximum speed is 13,300 rpm - with a simultaneous working speed of 80 m/s. The product meets the requirements of EN 12413, ensuring safety and quality work. The GRAPHITE brand sanding disc will be suitable for metalworking, workshop applications.
Turbo diamond cutting wheel, 230 x 22.2 mm, dry and wet 57T321 by GRAPHITE is a dry and wet turbo diamond cutting wheel with a diameter of 230 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.8 mm wide. The maximum speed of the disc is 6 600 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of EN 13236 and is designed for cutting stone, brick, marble, granite and concrete.
Turbo diamond cutting wheel, 115 x 22.2 mm, dry 57T315 by GRAPHITE is a turbo dry cutting wheel with a diameter of 115 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.2 mm wide. The maximum speed of the disc is 13 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of EN 13236 and is designed for cutting stone, brick, marble, granite and concrete.
The GRAPHITE 57T300 solid diamond cutting wheel, 115 x 22.2 mm, wet 57T300 is a solid diamond cutting wheel with a diameter of 115 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 5 mm high and 2 mm wide. The maximum speed of the disc is 13 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting terracotta, stoneware, granite and marble.
Grinding discs 125 x 20/16/12.7 x 16 mm, P 60, 2 pieces 57T127 by GRAPHITE have an external diameter of 125 mm and a thickness of 16 mm. The set includes 2 pieces of accessories with a gradation of P 60. The inner diameter of the mounting hole is 12.7 mm, but reductions are included: from 20 to 16 mm and from 16 to 12.7 mm. GRAPHITE brand discs will work well for use on bench grinders. The maximum recommended speed for them is 5350 rpm. They are used for grinding metal, sharpening knives, chisels and other cutting tools, as well as machining and levelling metal surfaces.
