GRAPHITE stone cutting disc allows to greatly reduce cutting time thanks to advanced design and reduced thickness. Product is compliant with EN12413, which ensures high safety at work.
Cutting wheel, alumina for metal/INOX 125 x 1.6 x 22.2 mm, 41 A46-T-BF, 57T103 by GRAPHITE is an alumina wheel that is designed for cutting metal and stainless steel (INOX). Its dimensions are 125 x 1.6 x 22.2 mm. This model has a flat design and the designation 41 A46-T-BF. The thickness of the blade is 1.6 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 12,200 rpm, corresponding to a speed of 80 m/s. The product complies with the EN 12413 standard.
Cutting wheel, corundum for metal 115 x 2.0 x 22.2 mm, 42 A46-T-BF, convex 57T118 by GRAPHITE is a convex wheel with a diameter of 115 mm, a thickness of 2 mm and a mounting hole of 22.2 mm. It features a maximum speed of 13,300 rpm, with an operating speed of 80 m/s. The product is designed for cutting metal. The GRAPHITE blade meets the requirements of EN 12413.
Cutting disc, corundum for metal/INOX 230 x 2.5 x 22.2 mm, 41 A30-S-BF, 57T104 by GRAPHITE is an alumina disc that is designed for cutting metal and stainless steel (INOX). Its dimensions are 230 x 2.5 x 22.2 mm. This model has a flat design and the designation 41 A30-S-BF. The thickness of the blade is 2.5 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 6,600 rpm, which corresponds to a speed of 80 m/s. The product complies with the EN 12413 standard.
Cutting disc, alumina for concrete 115 x 2.0 x 22.2 mm, 42 C46-R-BF, convex 57T122 by GRAPHITE is a convex disc with a diameter of 115 mm, a thickness of 2 mm and a mounting hole of 22.2 mm. It features a maximum speed of 13,300 rpm, with an operating speed of 80 m/s. The product is designed for cutting concrete. The GRAPHITE blade meets the requirements of EN 12413.
GRAPHITE metal cutting disc thanks to advanced design and reduced thickness allows to greatly reduce cutting time. Product is compliant with EN12413, which ensures high safety at work.
The 355 x 3.5 x 32 mm, 41 A24-R-BF, 57-712 metal cutting disc by NEO TOOLS is a 355 x 3.5 x 32 mm metal cutting disc for dry cutting. It is characterised by a maximum rotational speed of 4,400 rpm and a maximum peripheral speed of 80 m/s. Thanks to its advanced design and thickness, it allows a significant reduction in working time. It ensures a high level of safety thanks to compliance with the EN12413 standard. The NEO TOOLS brand disc is recommended for professionals and DIY enthusiasts.
The diamond blade 250 x 25.4 mm, solid 57-645 by NEO TOOLS with a blade diameter of 250 mm and a mounting hole diameter of 25.4 mm, is designed for trimming machines. Due to its hot-pressed continuous segment, it is ideal for heavy and demanding construction work. The robust diamond segment with a height of 6 mm and a thickness of 2.7 mm makes it possible to cut ceramic elements, such as terracotta, among others. The NEO TOOLS blade is recommended for wet cutting at a maximum speed of 6,100 rpm.
HSS bullet cutter 6 mm, shank 3.2 mm, 2 pieces 55-061 by NEO TOOLS is a "bullet" type cutter made from HSS high speed steel. It has a diameter of 6.0 mm and a shank diameter of 3.2 mm and is designed for grinding. It works well for machining metal, wood, ceramics, glass and plastics. The set includes 2 pieces of NEO TOOLS cutters.
Stone cutting disc 230 x 3,2 x 22,2 mm, 42 C 30-S-BF, 57-725 by NEO TOOLS is a 230 x 3,2 x 22,2 mm disc. The product is intended for dry stone cutting. It is characterised by a maximum rotational speed of 6 600 rpm and a maximum peripheral speed of 80 m/s. Thanks to its advanced design, it significantly reduces working time. It ensures a high level of safety thanks to compliance with the EN12313 standard. The NEO TOOLS brand disc is recommended for professionals and DIY enthusiasts.
The 125 x 22.2 mm, P40 flap wheel, 55-987 by NEO TOOLS is a 125 mm diameter, P40 gradation accessory with a 22.2 mm mounting hole, designed for efficient grinding of metal and wood with angle grinders. The fan-shaped, radial arrangement of the abrasive cloth leaves increases the efficiency of stock removal, while the C-type cloth base, adapted for machine sanding, provides stable pressure during use. It uses a solid coating (100% grain coverage, electro-corundum), which promotes service life and an even surface finish. The maximum speed is 12,250 rpm and the permissible linear speed is 80 m/s.
Flap wheel 115 x 22.2 mm, P60, 55-982 by NEO TOOLS is a 115 mm diameter, P60 gradation accessory with a 22.2 mm mounting hole, designed for efficient grinding of metal and wood with angle grinders. The fan-shaped, radial arrangement of the abrasive cloth leaves increases the efficiency of stock removal, while the C-type cloth base, adapted for machine sanding, provides stable pressure during use. It uses a solid coating (100% grain coverage, electro-corundum), which promotes service life and an even surface finish. The maximum speed is 13,300 rpm and the permissible linear speed is 80 m/s.
Accessories for mini sander, sanding belts, stones, abrasive discs, set of 52 pieces 55-082 by NEO TOOLS is a set of 52 pieces for working with metal, wood, ceramics, glass and plastics. The set includes 8 aluminium oxide sanding belts: 4 with a diameter of 6.3 mm and a gradation of P120 and 4 with a diameter of 12 mm and a gradation of P60, as well as 2 sanding drums (with a diameter of 12.7 mm and 6.3 mm). The set also includes 4 sanding stones: 1 "bullet" shaped with a diameter of 10 mm and a working height of 20 mm, 1 cylinder with a diameter of 16 mm and a working height of 10 mm and 2 cylinders with a diameter of 10 mm and a height of 15 mm, all with a shank of 3.2 mm. Complemented by 36 sanding discs with a diameter of 20 mm and 2 mandrels with a diameter of 3.2 mm. NEO TOOLS accessories are designed to operate at a maximum speed of 22,000 rpm.
Metal cutting discs 230 x 1.9 x 22.2 mm, 41 A46-S-BF, 5 pieces, film 55-579 by NEO TOOLS consists of 5 pieces of metal cutting discs with parameters 230 x 1.9 x 22.2 mm. The product is intended for dry metal cutting. It is characterised by a maximum rotational speed of 6 600 rpm and a maximum peripheral speed of 80 m/s. Thanks to its advanced design and appropriate thickness, it allows a significant reduction in working time. It ensures a high level of safety thanks to compliance with the EN12313 standard. The NEO TOOLS brand disc is recommended for professionals and DIY enthusiasts.
HSS conical cutter 1,4 mm, shank 3,2 mm, 2 pieces 55-065 by NEO TOOLS is a conical type cutter made of HSS. It has a diameter of 1.4 mm and a shank diameter of 3.2 mm and is designed for precision grinding. It works well on metal, wood, ceramics, glass and plastics. The set includes 2 pieces of NEO TOOLS cutters.
Diamond blade 230 x 25.4 mm, solid for 59G891, 57-647 by NEO TOOLS with blade diameter 230 mm and bore diameter 25.4 mm, is designed for the 59G891 GRAPHITE tile cutter. With its hot-pressed continuous segment, it is ideal for heavy and demanding construction work. The robust diamond segment with a height of 6 mm and a thickness of 2.4 mm makes it possible to cut ceramic elements, such as terracotta, among others. The NEO TOOLS blade is recommended for wet cutting at a maximum speed of 6 600 rpm.
Flap wheel, 60 x 30 mm, P80, 55-759 by NEO TOOLS is a 60 mm diameter, 30 mm working height grinding wheel with a 6 mm diameter shank. The maximum rotational speed is 12,700 rpm and the allowable linear speed is 80 m/s. The tool is designed for machining metal, plastics and wood. The abrasive cloth flap design (X-type base) ensures even stock removal in grinding and stable guidance on edges and profiled surfaces.
Flap wheel 125 x 22.2 mm, P40, zirconia 57-841 by NEO TOOLS is a 125 mm diameter, P40 gradation accessory with a 22.2 mm mounting hole, designed for grinding metal - including stainless steel and acid-resistant steel (INOX). The fan-shaped, radial flap arrangement with full grit (100% zirconia grain coverage) on an X-type cloth base ensures a high stock removal rate and stable guidance in machine work. The zirconia grain has a self-sharpening effect, thus extending the life of the tool in intensive work. The maximum speed is 12,250 rpm and the permissible linear speed is 80 m/s.
The 125 x 22.2 mm, P100, 55-990 flap wheel by NEO TOOLS is a 125 mm diameter, P100 gradation accessory with a 22.2 mm mounting hole, designed for efficient grinding of metal and wood with angle grinders. The fan-shaped, radial arrangement of the abrasive cloth flaps increases the efficiency of stock removal, while the C-type cloth base, adapted for machine sanding, provides stable pressure during use. It uses a solid coating (100% grain coverage, electro-corundum), which promotes service life and an even surface finish. The maximum speed is 12,250 rpm and the permissible linear speed is 80 m/s.
Metal cutting wheel 125 x 1 x 22,2 mm, 41 A60-R-BF, INOX, 57-733 by NEO TOOLS is a 125 x 1 x 22,2 mm cutting wheel for metal and INOX, designed for dry work. It is characterised by a maximum rotational speed of 12,200 rpm and a maximum peripheral speed of 80 m/s. Thanks to its advanced design and thickness, it allows a significant reduction in working time. It ensures a high level of safety thanks to compliance with the EN12313 standard. The NEO TOOLS brand disc is recommended for professionals and DIY enthusiasts.
