Äskettäin katsotut tuotteet
52-2044100
- Flow-optimized air supply for up to 75% less resistance
- Assembly of the filter elements without cross-sectional narrowing and disturbing tie rods, thus reduced flow resistance and easy element change even in confined spaces
- Cavity volume of the borosilicate filter material of 96% ensures the lowest pressure loss
- CLEARPOINT® filter housing made of water-resistant aluminum and additionally anodised on the inside, therefore increased operational safety and reduced flow resistance due to permanently smooth inner surfaces
- 100% control when opening the filter housing by a secure locking mechanism, when opened under pressure a warning signal sounds
- With thermally highly resistant (up to 120 ° C), mechanically highly resistant, chemically resistant and silicone-free needle felt drainage layer (in contrast to foam material of other filter makes)
- Stable construction of the filter element - it is not possible to inflate or rupture the drainage layer, thereby ensuring the constant use of the entire filter surface
- for the separation of oil vapors, odors and flavorings via adsorption and in the second stage of solid particles
- Residual content of oil vapor up to 0.003 mg / m³ at 20 ° C and 1 bar
- absolute compressed air quality according to ISO 8573-1
- For compressed air of the highest quality, eg, for breathing air, in analytical technology or semi-luxury bottling
- Pure compressed air in connection with upstream ultrafine filter
- With filter element and manual drain
ManufacturerBEKO Technologies GmbH
Im Taubental 7, 41468 Neuss, Germany
www.beko.de
52-2005498
- Oil-free compressor, no oil change and no oil in condensate
- Very smooth and quiet
- One pressure gauge for displaying the container and working pressure
- Very smooth operation and therefore very quiet
- Oil-free piston compressor: no oil change necessary and no oil in the condensate for best working quality
- Compressed air reducer for stepless adjustment of the desired working pressure
- High-quality CONDOR pressure switch
- Electric motor equipped with motor protection switch
- Fully automatic on/off operation
- One pressure gauge each for displaying the tank and working pressure
- Powder-coated compressed air tank
ManufacturerAircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at
52-2053338
- Compressed air filters are used for highly efficient removal of solid particles, water, oil, aerosols, hydrocarbons, odors and vapors from compressed air systems.
- To achieve the required quality of compressed air, filters that gradually remove all types of solid and liquid contaminants from the compressed air must be installed in the compressed air line.
- Your advantages through better quality compressed air:
- Safe filtration of both liquids such as water and aerosols as well as particles, dust and gases
- Better working and production conditions
- Optimum protection of connected tools and machines
- Improved product quality through reduction of rejects
- Protection of the compressed air system against contamination
- Increase of productivity by reduction of instant maintenance
- for the separation of solid contaminants up to 0.1μm
- Residual oil aerosol content up to 0.1 mg / m³ at 20 ° C and 1 bar
- Operating temperature 1.5 to 65 ° C
- absolute compressed air quality according to ISO 8573-1
- for safe separation of condensate and particles
- complete with filter element and float valve
ManufacturerAircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at
52-2049049
When producing and conditioning compressed air, condensate inevitably accumulates, oily and frequently polluted with dirt particles. Since condensate accumulates irregularly depending on the year and time of day or load of the compressor, the BEKOMAT® with its capacitive sensor often pays for itself over time-controlled drain valves within half a year.
Features and Benefits:
- Usable and resistant to oily and oil-free, aggressive condensates
- Easy connection to filter or boiler by adapting the inlet nozzle with horizontal or vertical condensate inlet
- With discharge with BEKOMAT® improved function with oil / water separators
- BEKOMAT® 32 with alarm function and switchable fault message
function Description
- Condensate collects in the collection container of the arrester.
- A capacitive sensor detects the level of the condensate. At maximum level, a diaphragm opens, through which the condensate is discharged through the system pressure.
- The membrane is closed before compressed air can escape
The advantages at a glance
- No unnecessary compressed air losses
- Derivation according to the amount of seizure
- Sensor detects every type of condensate
- Insensitive to dirt
- simple electrical installation (230 V)
- Low maintenance
Including service unit
- Economical: Complete replacement of all wearing parts and pressure-bearing parts with just one handle.
- no electrical installation required during maintenance
- no assembly of seals and individual parts
- Only one spare part, factory pressure and function tested
ManufacturerBEKO Technologies GmbH
Im Taubental 7, 41468 Neuss, Germany
www.beko.de
52-2048336
Advantages of DRYPOINT eco control
- Integrated DRYPOINT M Plus solution: filtration and dryer in a compact form, as well as condensate drain integrated
- Filtration on the spot in the treatment chain where the highest efficiency is achieved
- Easy maintenance / replacement of filter element as with a filter
- Application-specific degree of dryness can be selected
- Consistent compressed air quality under fluctuating operating conditions
- Energy saving through minimization of purging air consumption for actual amount of useful air and degree of drying
- Power evaluation via LED, forwarding via current output 4 … 20 mA possible
- User-friendly: Easy to use, test functions, error messages
- Concept based on the fail-safe principle, error message can be picked up via potential-free contact
Functionality of the DRYPOINT® M eco control
Based on the measurement result from the sensor, the control software decides in defined cycles whether and how long the full amount of purge air has to be provided to achieve and stabilize the required degree of dryness. This process is implemented by means of a targeted clocking of a solenoid valve. In each cycle, the duration of the two process sections described below varies in order to keep the degree of drying within the specified tolerance range.
ManufacturerBEKO Technologies GmbH
Im Taubental 7, 41468 Neuss, Germany
www.beko.de
