Metallintyöstökoneet

• Feed spindles can be adjusted backlash-free using adjustable spindle nuts
• Stable dovetail guide, precision-ground and scraped with adjustable gibs
• EMC filter (to protect sensitive electronics from interference from conducted interference signals class B)
• All guides are ground and visibly scraped (oil pockets for lubrication)
• Precisely machined
• Two-stage gear ratio for powerful transmission of motor power
• Powerful DC motor with permanent current monitoring
• Double-row angular contact ball bearings in the axles, adjustable without play
• Safety electrics in 24 volt version
• Bellows as guide protection
• Right/left rotation
• Drilling and milling head can be tilted by ± 900 for milling and drilling work at any angle
• Height-adjustable protective screen with microswitch, against flying chips and parts, for maximum protection of the user

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Material roller conveyor with stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 450 mm
• Length measuring device with handwheel adjustment
• Roller and measuring track with digital LED dimension display in mm, electrical connection 230 V, 50 Hz with power supply unit
• Measuring stop adjustable by handwheel from the workplace, with pneumatic brake for measuring fixation
• Sturdy material stop trolley, 12 ball bearings, movable on large dimensioned guide profile. The stop arm is adjustable and hinged.
• For roller conveyors with a length of more than 5 m, a cable drag chain is used
• Mounting side as desired right or left

Equipment details

position indicator

• 5-digit LED measurement display for constant, millimeter-accurate control of the current position of the stop car
• Position indicator with hollow shaft encoder mounted directly on the drive shaft
• Measuring accuracy / m: ± 0.5 mm

stop arm

• 900 mm long stop arm
• Stop plate adjustable to zero point and manually hinged backwards
• Multiple ball bearings, thus free of play
• Quality Made in Germany

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

Available on request

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

Quality Made in Europe
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Force transfer to tools via foot pedal
• Carriage unit for ease of transport

• For manufacturing wheel arches, window frames, rain gutters or door edges for classic vehicles
• For stretching and compressing edge-bent sheet metal
• Clean, fast and low-noise work
• Including compression and stretching tools
• Fast and easy tool changes
• Easy to use

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Robust machine design
• Manual and automatic mode selectable
• Easy tool change through quick change adapter

• Durable construction of tools and tool guides made of high-quality, hardened steel
• Manual operation via two foot pedals for flow and return
• Automatic mode by programming the front and rear travel end points
• Easy to change the die by quick change recording
• Foot pedal with digital display and emergency stop switch

Hydraulic oil not included

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 260 mm
• With length measuring device
• Roller and measuring track with mm-scale, manual measuring system with C-guide profile and sliding flap stop
• Quality Made in Germany

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Fine adjustment for parallel tape running
• 2 swiveling grinding tables, adjustable via clamping lever
• Powerful engine
• Standard with extraction nozzle on the spark arrester
• Very fast sanding belt change due to easy operation
• Conveniently fixable on workbench

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• For steel, aluminium, wood or plastic
• Angular adjustment from 0 to 45 degrees

• Processing of various materials such as steel, aluminium, wood or plastic
• With infinitely variable angle adjustment and resting points for 15°, 30° and 45°
• Suitable for long-term operation
• Manual height adjustment of the cutter via handwheel
• Setting the chamfer depth via scale

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Universally usable for heating, gas, boiling and heating Water pipes, copper pipes and composite pipes
• Hinged bender frame for convenient and efficient operation
• Tripod stand for ergonomic work

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Manual height adjustment of the work table with numerical display
• Conveyor table with profile conveyor belt for optimum hold during transportduring machining
• wet cooling for effective heat reduction for small parts or for machining with slow feed

• Particularly suitable for narrow workpieces
• Due to the open C-frame shape, occasional deburring of parts wider than 300mm is also possible
• Manual height adjustment of the work table with numerical display
• Conveyor table with profiled conveyor belt for optimum support during machining
• Wet cooling for effective heat reduction on small parts or for machining at slow feed rates
• Effective workpiece drying after the grinding process by radial fan
• Coolant cleaning in external paper belt filter

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• For sawing e.g. stainless steel, tool steel, profiles and solid materials
• Material feed 990 mm
• Saw band guide with adjustable HM plates
• Robust, automatically adjustable saw band guide with cooling system
• With hydraulic band tensioning
• Linear guides on both columns
• With motor driven chip clearing brush
• Operation on modern and powerful Siemens HMI multi-touch panel

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Impressively quiet!
• Highest life
• Infinitely 30-80 m / min
• Use of coolant on all models possible

• Ideal for sawing steel, aluminum, copper, PVC and Teflon
• Stepless, electronic speed control from 30 - 80 m / min
• Particularly quiet - up to 60% quieter than comparable band saws
• Low vibration and wear thanks to special gearbox with two large gears made of hardened steel
• Guaranteed cutting accuracy of max. 0.3 mm course over 100 mm cutting length
• Each machine individually tested for precision in Italy
• Low-speed DC drive motor with carbon brushes for up to 10 times longer life
• Electronic temperature and ampere recording monitoring against overload
• Cast strip wheels with ground running surface without rubber pads, therefore suitable for dry and wet cutting
• Massive saw bar made of die-cast aluminum (readjustable from MBS 125) and with sturdy transport lock
• Two movable, adjustable saw band guides with chip scraper made of metal
• Particularly stable base plate with non-slip feet
• Very service-friendly, as components are easily accessible

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Heavy and stable welded construction
• Punching table with scale and stops
• Extra large projection with 625 mm
• Time-saving, stepless stroke adjustment
• With a powerful engine
• Stepless adjustment of the stroke
• Punching saddle with second holder for machining UPN profiles
• Stamps and dies no. 1, no. 2, no. 3, no. 30, no. 45, no. 60 can be used with the standard delivery scope of the machine. Use of punch and die no. 4 and no. 80 optional

Important information:

• Please specify when ordering material to be edited!

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Please specify when ordering mounting side and height!

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Fast and easy filter change
• Large collection container with quick access via drawer
• Compact and stable housing
• High capacity in the interior
• Effective suction

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• For the creation of clean visible edges and for weld preparation
• Stationary or mobile device to use
• Easy and quick change from stationary to mobile use with thumbscrews and removable base
• Tool-free adjustment of the chamfer depth
• Standard angle settings at 15°, 30° and 45°
• Feed is done manually
• With patented technology
• Handy and powerful device
• For processing steel, non-ferrous metals and plastics
• Functional arrangement of the handles enable safe guiding of the device in mobile operation
• Guide plate equipped with adjustable ball heads for easy movement of the workpiece
• Automatic safety shutdown in case of overheating

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

Available on request

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

Quality Made in Europe

Note on technical data
For bending stainless steel, optional hardening of the tools is required
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Semi-motor version - manual operation of the upper cheek, bending process motorised
• Designed for professional use
• With foot operation
• heavy, compact weldment
• With continuous sharp bending rail
• Standard with manual adjustment of the bending angle by means of nonius ring
• Particularly low-maintenance
• S-models with segmented top tools
• SH models with high, segmented goat foot tools
• Hardening of standard tools available on request: sharp bending rail and bending strip hardened, segmented tools and bending strip hardened, segmented goat foot tools and bending strip hardened
• Further swivel bending machines available on request

Quality Made in Europe
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Inexpensive beginner models for craftsmen
• Simple design and solid construction ensure accurate work
• Secure fixing of the workpiece via clamping device

HSBM 305 HS / 610 HS:

• Segmented upper cheek
• Ideal for the production of all profiles up to all around edged boxes
• Fast, user-friendly adjustment of the upper beam via eccentric
• Upper beam for high U-profiles
• Swivel bending over bow handle
• Easy to transport

HSBM 1020-10:

• User-friendly adjustment of the upper beam
• Swivel bend via double handle

HSBM 2200-0.7 and HSBM 3000-0.6

• Two machines in one: manual folding machine and scissors
• Ideal for roofers on assembly, z. B. for making Erkerblechen, Mehlblechen, chimney linings
• The detachable roller cutter enables precise cutting of copper and zinc sheet
• Angle display from 0 - 135 °
• Swivel bending with secure clamping of the workpiece by preloading the upper beam
• Optionally available for HSBM 2200-0.7: function for beading sheet metal
• Quality Made in Europe

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Manual backgauge with 750 mm travel range
• High-quality, rotatable blades suitable for cutting stainless steel
• Rear area protected by light curtain
• Operation via mobile foot pedal console with emergency stop

• Slider-guided top beam with adjustable flat guides
• Manual backgauge with 750 mm travel range
• LED cut line illumination and slotted holes in top cover for an optimal view of the cutting edge for cutting up Tear
• Solid 90° side stop with 1000 mm length, T-Slot, tilt cam and scale
• Two solid plate support arms with T-Slot and tilt cam
• High quality, rotatable knives, suitable for cutting stainless steel
• Heavy hold-down bar with gentle rubber inserts
• Rear area protected by light curtain
• Operation via mobile foot pedal console with emergency stop

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de