Metallintyöstökoneet

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Please specify when ordering mounting side and height!

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Punching station, flat steel shears, angle steel shears, sectional steel shears, available with notching station starting from HPS 45S
• DS series with two working cylinders and two foot pedals for simultaneous use with punching station and sectional steel shears
• Stepless adjustment of the stroke
• Larger reach for punching station with 620 mm optional, available from HPS 55DS
• Heavy and rigid welded construction
• Standard with notching knife starting from HPS 45S
• With powerful 400 Volt motor
• V-notching knife, oversized punching device and larger throat depth for punching station available on request
• Two-stage foot pedal for inching operation
• Stamps and dies No. 1, No. 2, No. 3, No. 30, No. 45, No. 60 can be used with the standard delivery scope of the machine. Use of punch and die No. 4 and No. 80 optional (except HPS 40S)

Advantages of punching over drilling:

• High time savings - cycle times
• No chips
• No cooling

Note:

• All hydraulic sectional shears are delivered with oil

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Direct magnetic belt measuring system
• Delivery of direct magnetic belt measuring system including display unit Z58
• Independent stop carriage and length measuring drives
• Dimension is displayed via display unit Z58
• Sensor head mounted directly on the stop carriage
• Dimensional and repetition accuracy ± 0.1 mm per metre
• Cable and air ducting via energy drag chain

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Direct magnetic belt measuring system
• Delivery of direct magnetic belt measuring system including display unit Z58
• Independent stop carriage and length measuring drives
• Dimension is displayed via display unit Z58
• Sensor head mounted directly on the stop carriage
• Dimensional and repetition accuracy ± 0.1 mm per metre
• Cable and air ducting via energy drag chain

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Direct magnetic belt measuring system
• Delivery of direct magnetic belt measuring system including display unit Z58
• Independent stop carriage and length measuring drives
• Dimension is displayed via display unit Z58
• Sensor head mounted directly on the stop carriage
• Dimensional and repetition accuracy ± 0.1 mm per metre
• Cable and air ducting via energy drag chain

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• For sawing hollow profiles and solid materials made of steel, stainless steel, tool steel, non-ferrous metals and plastic
• Mitre adjustment from -45° to +60°, user-friendly adjustment from the front for better handling, especially with attached roller conveyor
• Robust band guides with adjustable carbide plates for a precise cut
• Saw blade guides with integrated cooling system
• Electromechanical monitoring of the saw blade tension via microswitch
• With chip clearing brush for optimum cleaning and maintenance of the saw blade
• When the saw arm is raised, the lowering cylinder locks automatically in the upper position - no additional locking on the cylinder is required
• Saw arm tilted by 25°, thus extending the service life of the saw blade
• The saw blade stops automatically at the end of the cutting process
• Lowering of the saw arm by gravity or manually (H-DG)
• Turntable with swiveling cutting gap: No cutting into the saw table, therefore always a flat contact surface and therefore greater cutting accuracy
• Ergonomic operating concept
• Clamping lever for angle adjustment from the front: faster adjustment of the cutting angle
• Mounting adapter for roller conveyors included in the scope of delivery
• Vice with quick clamping device

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• For sanding metals, non-ferrous metals, plastics, wood, Plexiglas, etc.
• Sturdy steel housing
• Fence enables quick and easy sanding of workpieces

• With this combination sander, you can effortlessly sand various materials such as metals, non-ferrous metals, plastics, wood, Plexiglas, etc.
• Sturdy steel housing
• Fence enables quick and easy sanding of workpieces
• One sanding disc and multi-purpose brush included in the scope of delivery

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• With high-quality bi-metal band saw blade as standard
• Adjustable material stop for standard work
• Push button on the lever arm for the saw blade run switches the saw blade run on and off
• Base plate with non-slip feet
• Low-vibration and low-wear thanks to special gearbox with two hardened steel gears
• Vario drive motor with low speed and carbon brushes for up to 10 times longer service life
• Saw arm can be tilted from 0° to +60° to enable angled saw cuts

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• For precision surface grinding
• Maximum stiffness and stability thanks to tension-free re-heated and hardened cast iron construction
• High-quality spindle with precision cone roller bearings (circular accuracy 2 microns)
• Electromagnetic clamping plate for fixing the workpiece including automatic demagnetization function
• Automatic central lubrication for all slides and spindles
• Hand scraped and Turcite-B-coated V-flat guides guarantee extremely uniform, low-friction movement and highest precision
• Halogen working light dustproof, completely contact-proof and protected against jet water according to IP65
• Second grinding wheel flange included in delivery

Automatic feed control AD 5
The fsM series models are equipped with automatic feed control (AD 5). Different grinding cycles are available: surface loops with delivery at the starting point, groove loops with delivery at the starting point, groove loops with delivery at the start and end points. The delivery of the grinding wheel can be individually designed depending on the workpiece. The total grinding size is divided into coarse and fine delivery, the delivery steps can be freely entered, depending on the application, with a minimum resolution of up to 0.001mm. The possibility to program dead runs after a certain number of delivery steps as well as passages for firing after reaching the grinding measure provides the best grinding results.
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Roller and guideway system on which lighter wood, metal or plastic profiles can be precisely sawed, drilled or milled
• Substructure made of solid 3 mm steel profiles, painted and with adjustable feet
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• With length stop, magnetic tape measuring system with digital display, measuring accuracy +/- 0.2 mm per meter
• Stop car is 4-roller bearings, thus manually easily displaced
• Adjustable stop arm and can be folded away to the rear
• The maximum measuring length is the length of the web minus the stop length of 250 mm
• Quality Made in Germany

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Guaranteed concentricity ≤ 0.02 mm measured in the drill spindle
• Drill spindle with precision ball bearing
• High-quality quick-action drill chuck
• Work table adjustable from +45° to -45°

• Guaranteed concentricity ≤ 0.02 mm measured in the drill spindle
• Drill spindle with precision ball bearing
• High-quality quick-action drill chuck
• Height-adjustable chuck protection cover
• Work table adjustable from +45° to -45°
• With high practical performance

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Suitable for wet grinding machines
• Filter area visible through transparent plastic windows

• Suitable for wet grinding machines
• Filter area visible through transparent plastic windows

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

For stable mounting of roller conveyors of the series MRB LC to Metallkraft circular saws. The adapters are specially designed for mounting to the right or left of the saws. Please indicate the machine type of your saw when ordering.
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• For sawing hollow profiles and solid materials made of steel, stainless steel, tool steel, non-ferrous metals and plastic
• Robust band guides with adjustable carbide plates for a precise cut
• Hydraulically controlled system for both clamping vices and the up and down movement of the saw arm
• With chip clearing brush for optimum cleaning and maintenance of the saw band
• Saw arm inclined by 25°, This extends the service life of the saw blade
• BRP - saw blade monitoring
• The jaws of the two clamping vices are equipped with long-stroke hydraulic cylinders as standard, This eliminates the need for pre-setting to the material cross-section to be sawn
• With pivoting cutting gap for mitre adjustment - does not cut into the saw tableMaterial is fed
• via hydraulic cylindersBandsaw blade guides
• with integrated cooling
• systemSwivel plate
• with
• bearingsCutting probe function
• with integrated buttonWith
• digital angle displayWith
• pivoting control panel

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Bending and rolling of wires, pipes and sheets
• Ground bending rolls
• Mounted steel sidewalls (self-lubricating)
• Two removable rollers
• Separate adjustment for material thickness and rolling radius
• For use on the vise
• Stable support surface
• Wire insert grooves Ø 1 - 2 - 3 - 4 - 5 mm

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Designed for industrial use
• Extremely stable and robust design
• Saw blade drive via low-maintenance, oil-lubricated worm gear unit
• With SIEMENS Simatic control system and SIEMENS electrics
• Operation on modern and powerful Siemens HMI multi-touch panel
• Control of the material and saw feed via ball screws
• Robust three-phase motor equipped with overload protection
• Frequency converter for infinitely variable adjustment of the saw blade speed from 20 - 100 m/min as standard
• Saw blade guide with adjustable carbide plates for a precise cut
• Hydraulic band tensioning device
• Saw arm can be tilted from -45 to +60 degrees
• Fully automatic mitre adjustment on both sides
• Swiveling control panel
• Chip clearing brush for optimum cleaning and maintenance of the saw blade
• 64-bit control system
• Automatic material feed of 970 mm
• Pressure reducer Clamping vice
• Saw blade guides with integrated cooling system

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Material roller conveyor with stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 450 mm
• Length measuring device with handwheel adjustment
• Roller and measuring track with digital LED dimension display in mm, electrical connection 230 V, 50 Hz with power supply unit
• Measuring stop adjustable by handwheel from the workplace, with pneumatic brake for measuring fixation
• Sturdy material stop trolley, 12 ball bearings, movable on large dimensioned guide profile. The stop arm is adjustable and hinged.
• For roller conveyors with a length of more than 5 m, a cable drag chain is used
• Mounting side as desired right or left

Equipment details

position indicator

• 5-digit LED measurement display for constant, millimeter-accurate control of the current position of the stop car
• Position indicator with hollow shaft encoder mounted directly on the drive shaft
• Measuring accuracy / m: ± 0.5 mm

stop arm

• 900 mm long stop arm
• Stop plate adjustable to zero point and manually hinged backwards
• Multiple ball bearings, thus free of play
• Quality Made in Germany

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Very heavy and robust welded construction
• Dynamic drive of the bending beam by means of two frequency-controlled motors with gears
• Over cheek clamping via trapezoidal thread
• High-quality Lenze motors
• Continuous sharp bending rail
• Tools suitable for bending stainless steel
• Bending angle adjustment via touchscreen NC control system
• Sheet thickness adjustment manually at the bending beam
• Manual crowning device of the bending beam
• Operation via double foot pedal with emergency stop function
• Clean motor-driven machine without hydraulics
• SH models with segmented, high goat foot tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

Quality made in Germany
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Versatile range of applications, e.g. drilling, reaming, thread cutting
• Electrically braked motor
• 24V DC electrics and 2-channel safety chain in accordance with DIN EN 12717
• Heavy, solid, high-quality casting
• Wide reach thanks to horizontally adjustable machine head
• Clearly arranged control panel
• Smooth-running swivel and traversing axles
• Elaborately crafted column swivel with optimized clamping for maximum stability with minimal clamping offset
• Heavy-duty, torsion-resistant construction of the boom
• Boom height adjustment via powerful motorized drive and lifting spindle
• Gearbox of the drill head runs in an oil bath
• Boom guideways hardened and precision-ground
• Gear wheels made of chrome-nickel steel, hardened and precision-ground for quiet and smooth running
• Drill head and column can be clamped or released together or separately
• Right-left rotation
• Solid, precise drill table, large dimensions
• Hardened and ground clamping table with parallel T-slots
• Machine light
• Overload protection
• Thick-walled cast iron column ensures smooth running and stability
• LED lamp
• Coolant system with coolant tank in the machine base

RD 6 / RD 7

• Column is clamped hydraulically

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de