Metal drill Hex 11.0 mm

Flap wheel 80 x 40 x 6 mm, P40, 58T380 by GRAPHITE has dimensions of 80 × 40 × 6 mm and gradation P40. It is designed for universal use, especially for machining hard-to-reach areas. The grain is made of electro-corundum and the bond is synthetic resin. The maximum speed recommended for this GRAPHITE brand grinding wheel is 8000 rpm and the working speed is 35 m/s.

Paint masking tape blue 38 mm x 25 m 56-070 by NEO TOOLS is a 25 m long, 38 mm wide and 140 mic thick tape. It is characterised by its UV resistance and is designed for use both indoors and outdoors. It will be suitable for any type of paint. Thanks to its special structure, it eliminates run-off and leaves an aesthetically pleasing finish. Recommended for edge protection when painting, NEO TOOLS masking tape will be suitable for both professional tasks and personal use.

Paint masking tape blue 25 mm x 25 m 56-068 by NEO TOOLS is a 25 m long, 25 mm wide and 140 mic thick tape. It is characterised by its UV resistance and is designed for use both indoors and outdoors. It will be suitable for any type of paint. Thanks to its special structure, it eliminates run-off and leaves an aesthetically pleasing finish. Recommended for edge protection when painting, NEO TOOLS masking tape will be suitable for both professional tasks and personal use.

Saw blade, widia, 160 x 30 mm, 36 teeth 57T211 by GRAPHITE, with an external diameter of 160 mm and a mounting hole diameter of 30 mm. It has 36 teeth, the cut width is 2 mm and the tooth angle is 15°. The maximum speed is 11,000 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.

GRAPHITE's 105 mm 56T720 bi-metal hole saw with a height of 44 mm allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 80 rpm, Inox steel - 40 rpm, aluminium - 120 rpm, wood - 100 rpm, cast iron - 55 rpm, brass - 110 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.