Metallisorvit

• Hardened and ground Z-axis guideway
• Guaranteed concentricity of the spindle nose ≤ 0.015 mm
• Shafts, wheels and main spindle run in an oil bath
• Lead screw cover
• Precisely machined slide
• All guides can be adjusted using gibs
• Mechanical longitudinal feed cut-off of the bed slide with four adjustable eccentrics
• Right/left rotation on the bed slide switchable via switching spindle
• Two-channel safety electronics
• Central lubrication in the bed slide
• Upper slide adjustment range ± 90
• Smooth-running gear wheels, hardened and ground, mounted on 2 adjustable precision tapered roller bearings
• Switch with life cycle calculation, tested in accordance with EN ISO 13849
• Large chip guard with integrated LED machine lamp
• Handwheels with adjustable fine scaling 0.04 / 0.02 mm
• Safety handwheels with disengagement function in accordance with EN23125 in the X and Z axes
• High-speed feed gearbox in closed design, gear wheels and shafts hardened and ground, running in an oil bath in precision bearings
• Scale of the threaded clock adjustable
• Tailstock for taper turning adjustable ± 10 mm
• Tailstock quill and handwheel with adjustable fine scale 0.025 mm
• Quick, easy and tool-free adjustment of the tailstock using a clamping lever
• Cable routing via energy chain
• Heavily ribbed prism bed, induction-hardened and precision-ground from gray cast iron
• Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
• Emergency stop device with foot actuation

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Precise processing
• Heavily ribbed prism bed made of cast steel, inductively hardened and precision ground
• Hardened and ground Z-axis guideway
• Hardened spindle nose (DIN 6350)
• Guaranteed concentricity of the spindle nose better than 0.009 mm
• Automatic longitudinal / lead screw drive
• Roll-rolled trapezoidal thread of the lead screw
• Leadscrew stored in two sintered bearings
• Longitudinal, top and top slides
• Right / left rotation in the control panel switchable
• Hardened main spindle mounted in adjustable precision tapered roller bearings
• Tapered roller bearings in P5 quality
• Cylindrical center mount
• Hardened spindle nose with Ø 21 mm spindle bore
• Chuck concentricity better than 0.04 mm
• Tailstock adjustable for bow turning
• Tailstock quill and handwheel with adjustable fine scale 0.02 mm
• Fast, easy and tool-free adjustment by means of a clamping lever
• Emergency stop impact switch
• Lathe chuck protection
• thrust bearing
• Change gear
• Quadruple steel holder, rotatable
• Replacement gear set in the standard scope of delivery enables large thread cutting area
• 3-jaw lathe chuck in the standard scope of delivery
• EMC filter class C1

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Precisely manufactured
• Hardened and ground Z-axis guideway
• Guaranteed concentricity of the spindle nose better than 0.009 mm
• Rolled trapezoid spindles
• Leadscrew stored in two sintered bearings
• Two tapered roller bearings in P5 quality
• Precisely crafted sled
• Handwheels with adjustable fine scale 0.04 / 0.01 mm
• Quadruple tool holder
• All guides can be adjusted by wedge strips
• Concentricity - chuck better than 0.05 mm
• Lead screw for thread cutting or automatic longitudinal turning
• Right / left rotation in the control panel switchable
• Tailstock for taper turning ± 5 mm adjustable
• Tailstock quill and handwheel with adjustable fine scale 0.02 mm
• Fast, easy and tool-free adjustment by means of a clamping lever
• Emergency stop impact switch
• thrust bearing
• Extensive accessories
• 3-jaw lathe chuck in the standard scope of delivery
• Stable value

TU 2406V

• Speed change easily adjustable via potentiometer
• Digital speed display
• EMC filter class C1

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Machine bed made of heavily ribbed cast iron
• One-piece machine base made of steel
• High rigidity of the headstock housing due to heavily ribbed 25GG casting
• Precisely machined slide
• Shafts on needle bearings, all components are lubricated in an oil bath
• Bed guides hardened and precision ground
• All electronic controls can be reached centrally
• All gear wheels of the feed gear made of hardened steel
• Handwheels decoupled and tested in accordance with EN 23125
• Two-channel safety electronics
• Switch with life cycle calculation, tested in accordance with EN ISO 13849
• Coolant system with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
• Complete lead and pull spindle cover
• Complete illumination of the work area
• Hardened and ground face spindle ensures enormous accuracy and durability
• High chip removal during roughing is no problem thanks to the high cutting capacity
• Energy chain for gentle cable and hose guidance
• Lockable chip guard moves with the bed slide with integrated position indicator and coolant hose, can be moved manually
• No change wheels necessary
• With safety device to prevent simultaneous operation of tapping and feed mechanism
• Electronically braked motor
• Electronic feed cut-off of the Z-axis
• Electric position cut-off with quadruple position stop
• Three-jaw lathe chuck included in the scope of delivery
• SWH 5-B quick-change steel holder included in the scope of delivery

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Precise processing
• Heavily ribbed prism bed made of gray cast iron, inductively hardened and precision ground
• Hardened and ground Z-axis guideway
• Smooth-running feed gear with rounded gears running in an oil bath
• Guaranteed concentricity of the spindle nose better than 0.009 mm
• Concentricity on the lathe chuck better than 0.04 mm
• Quadruple tool holder
• All guides can be adjusted by wedge strips
• Right / left rotation in the control panel switchable
• Hardened main spindle mounted in adjustable, precision tapered roller bearings
• Tapered roller bearings in P5 quality
• Hardened spindle nose
• Large spindle bore Ø 38 mm
• Lead screw for thread cutting or automatic longitudinal turning
• Guide and feed shaft stored in two sintered bearings
• Automatic longitudinal / flat feeds
• Lead screw and tension spindle cover
• Tailstock for taper turning ± 5 mm adjustable
• Tailstock quill and handwheel with adjustable fine scale 0.02 mm
• Fast, easy and tool-free adjustment by means of a clamping lever
• Handwheels on the carriage with adjustable fine scale 0.04 / 0.01 mm
• Change wheel set in the standard scope of supply for thread cutting
• Emergency stop impact switch

TU 3008

• fan belt

TU3008G

• transmission

TU 3008V

• V-belt and brushless drive
• Quiet, powerful and brushless DC drive with excellent control characteristics
• High precision steel lining for higher speeds
• Digital speed display

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Hardened and ground Z-axis guideway
• Guaranteed concentricity of the spindle nose better than 0.015 mm
• Spindle holder Camlock DIN ISO 702-2 No. 8
• Lead screw cover
• Precisely machined slide
• All guides can be adjusted using wedge strips
• Right/left rotation on bed slide switchable via switching spindle
• Two-channel safety electronics
• Upper slide adjustment range ± 90
• Smooth-running, hardened and ground gear wheels mounted on 2 adjustable precision tapered roller bearings
• Clearly arranged selector lever for switching the feed speeds
• Closed design of the high-speed feed gearbox
• Gear wheels and shafts hardened and ground, running in an oil bath in precision bearings
• Handwheels decoupled and tested in accordance with EN 23125
• Safety handwheels with disengagement function in the X-axis
• Handwheels with adjustable fine scaling 0.04 / 0.02 mm
• Safety limit switch with positive opening contacts
• Switch with life cycle calculation, tested in accordance with EN ISO 13849
• Central lubrication in the bed slide
• Emergency stop switch, motor protection switch, lockable main switch
• LED machine lamp
• Energy chain for gentle cable and hose routing
• Emergency stop device with foot control
• Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
• Electric motor brake with quick emergency stop - quick stop without overrun during normal operation
• Electrical system with Siemens components
• Quick-change steel holder SWH 9-D
• 1 steel holder 41 x 180 type D for square chisel 32 mm

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Precise processing
• Powerful, maintenance-free engine
• Heavily ribbed prism bed made of gray cast iron, inductively hardened and precision ground
• Smooth-running feed gear with rounded gears running in an oil bath
• Hardened and ground Z-axis guideway
• Guaranteed concentricity of the spindle nose better than 0.009 mm
• Concentricity on the lathe chuck better than 0.04 mm
• Automatic longitudinal / lead screw drive
• Lead screw for thread cutting or automatic longitudinal turning
• Quadruple tool holder
• All guides can be adjusted by wedge strips
• Right / left rotation in the control panel switchable
• Hardened main spindle mounted in adjustable precision tapered roller bearings
• Tapered roller bearings in P5 quality
• Hardened spindle nose with Ø 26 mm spindle bore
• Rolled trapezoid spindles
• Chip protection on the upper slide
• Upper slide on cross slide slidable
• Tailstock for taper turning ± 5 mm adjustable
• Tailstock quill and handwheel with adjustable fine scale 0.02 mm
• Fast, easy and tool-free adjustment by means of a clamping lever
• Leadscrew stored in two sintered bearings
• Change gear set in standard scope of supply for thread cutting
• Handwheels on the carriage with adjustable fine scale 0.04 / 0.01 mm
• thrust bearing
• 3-jaw lathe chuck in the standard scope of delivery
• Emergency stop impact switch
• Fully equipped, allowing the user to be productive immediately after commissioning

• Speed change easily adjustable via potentiometer
• Digital speed display
• EMC filter class C1

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Machine bed made of heavily ribbed cast iron
• One-piece machine base made of steel
• High rigidity of the headstock housing thanks to heavily ribbed 25GG casting
• All gear wheels of the feed gear made of hardened steel
• Shafts on needle bearings, all components are lubricated in an oil bath
• Hardened and ground face spindle ensures enormous accuracy and durability
• High chip removal during roughing is no problem thanks to the high cutting capacity
• Service-friendly removable rear panel
• Energy chain for gentle cable and hose guidance
• Lockable chip guard moves with the bed slide with integrated position indicator and coolant hose, can be moved manually
• Handwheels decoupled and tested in accordance with EN 23125
• Two-channel safety electronics
• No change wheels necessary
• Switch with life cycle calculation tested in accordance with EN ISO 13849
• With safety device to prevent simultaneous operation of tapping and feed mechanism
• Bed guides hardened and precision ground
• Electronically braked motor
• Electronic feed cut-off of the Z-axis
• Electric position cut-off with quadruple position stop
• Three-jaw lathe chuck included as standard
• Digital position indicator DPA 32 with cutting constant VSC

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Hardened and ground Z-axis guideway
• Spindle mount Camlock DIN ISO 702-2 No. 6
• Precisely crafted sled
• Handwheels with adjustable fine scale 0.04 / 0.02 mm
• All guides can be adjusted by wedge strips
• Adjustment range upper slide ± 90 °
• Guaranteed concentricity of the spindle nose better than 0.015 mm
• Main spindle running in oil bath
• Gear wheels smooth, hardened and ground with 2 adjustable precision tapered roller bearings
• Handwheels decoupled and tested according to EN 23125
• Two-channel right-left switch tested to EN 23125
• Switch with life cycle calculation, tested according to EN ISO 13849
• All metric pitches in the range of 0.2 to 14 mm / rev and all inch threads in the range of 72 - 2 pitch per inch are adjustable without change of the change gears by lever in the control panel
• Right / left rotation on bed carriage via switching spindle switchable
• Central lubrication in the bed slide
• Substructure and machine bed made of casted Meehanite cast in one piece
• leading spindle
• Emergency stop device with foot control
• Safety handwheels with release function in the X and Z axis
• Tailstock for taper turning ± 10 mm adjustable
• Tailstock quill and hand wheel with adjustable fine scale 0.025 mm
• Fast, easy and tool-free adjustment by means of a clamping lever
• Strongly ribbed prism bed, induction hardened and precision ground from gray cast iron
• Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN
• LED machine lamp in chip protection
• Siemens Sinamics Frequency Inverter / Safety Integrated
• Quick change steel holder 5-B
• Steel holder 20 x 100 type D for square chisel 18 mm

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Hardened and ground Z-axis guideway
• Guaranteed concentricity of the spindle nose better than 0.015 mm
• Spindle holder Camlock DIN ISO 702-2 No. 8
• Lead screw cover
• Precisely machined slide
• All guides can be adjusted using wedge strips
• Right/left rotation on bed slide switchable via switching spindle
• Two-channel safety electronics
• Central lubrication in the bed slide
• Upper slide adjustment range ± 90
• Smooth-running, hardened and ground gear wheels mounted on 2 adjustable precision tapered roller bearings
• Clearly arranged selector lever for switching the feed speeds
• Closed design of the high-speed feed gearbox
• Gear wheels and shafts hardened and ground, running in an oil bath in precision bearings
• Handwheels decoupled and tested in accordance with EN 23125
• Safety handwheels with disengagement function in the X-axis
• Handwheels with adjustable fine scaling 0.04 / 0.02 mm
• Safety limit switch with positive opening contacts
• Switch with life cycle calculation, tested in accordance with EN ISO 13849
• Emergency stop switch, motor protection switch, lockable main switch
• LED machine lamp
• Energy chain for gentle cable and hose routing
• Emergency stop device with foot control
• Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
• Electric motor brake with quick emergency stop - quick stop without overrun during normal operation
• Quick-change steel holder SWH 9-D
• 1 steel holder 41 x 180 type D for square chisel 32 mm

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Hardened and ground Z-axis guideway
• Precisely machined carriage
• DC 24 volt electrics
• Motor protection switch
• Main motor electrically braked
• Guaranteed concentricity of the spindle nose better than 0.015 mm
• Smooth-running feed gear with rounded gears running in an oil bath
• Hardened main spindle mounted in adjustable, precise tapered roller bearings
• Right/left rotation switchable on the bed slide
• Two-channel safety electronics
• Handwheels with adjustable fine scaling 0.04 / 0.02 mm
• Safety handwheels with disengagement function according to EN23125 in the X and Z axis
• Switch rod on the bed slide for selecting longitudinal or face feed
• Switch with life cycle calculation tested in accordance with EN ISO 13849
• Machine base in sturdy steel construction
• Quadruple steel holder
• Emergency stop switch right and left
• Cutting constant VSC

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Hardened and ground Z-axis guideway
• Guaranteed concentricity of the spindle nose better than 0.015 mm
• Spindle holder Camlock DIN ISO 702-2 No. 6
• Lead screw cover
• Precisely machined slide
• All guides can be adjusted using wedge strips
• Right/left rotation on bed slide switchable via switching spindle
• Two-channel safety electronics
• Central lubrication in the bed slide
• Upper slide adjustment range ± 90
• Main spindle runs in oil bath
• Smooth-running gear wheels, hardened and ground with 2 adjustable precision tapered roller bearings
• Switch with life cycle calculation, tested in accordance with EN ISO 13849
• All metric pitches in the range from 0.2 to 14 mm/rev and all inch threads in the range from 72 - 2 threads per inch can be adjusted without replacing the change gears using the switch lever in the control panel
• Handwheels with adjustable fine scaling 0.04 / 0.02 mm
• Safety handwheels with disengagement function according to EN23125 in the X- and Z-axis
• Heavily ribbed prism bed, induction-hardened and precision-ground from gray cast iron
• Coolant system with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
• Substructure and machine bed cast in one piece from Meehanite cast iron
• Emergency stop device with foot actuation
• Quadruple steel holder

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Hardened and ground Z-axis guideway
• Motor protection switch
• Switch cabinet with 24 V DC power supply unit
• Partial enclosure with large chip guard included
• Chip guard with integrated position indicator, coolant hose and additional control panel
• Two-channel safety electronics
• Face and top slide spindle is hardened and ground and can be adjusted via split spindle nut
• Lead and feed spindle cover
• Finely graduated feed and thread cutting range
• Energy chain for gentle cable and hose guidance
• The standard gear wheels for metric thread pitches and modular threads are mounted in the machine. Change gears for inch and D.P threads optionally available
• Switch with life cycle calculation tested in accordance with EN ISO 13849
• Decoupled handwheels tested in accordance with EN 23125
• Safety handwheels with disengagement function in the X and Z axes
• Chip tray can be pulled out to the front
• Coolant device
• Quick-change steel holder SWH 5-B
• Steel holder 25 x 120 type D for square chisel 20 mm
• LED machine lamp for complete illumination of the work area

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Precise processing
• Heavily ribbed prism bed made of gray cast iron, inductively hardened and precision ground
• Hardened and ground Z-axis guideway
• Smooth-running feed gear with rounded gears running in an oil bath
• Guaranteed concentricity of the spindle nose better than 0.009 mm
• Concentricity on the lathe chuck better than 0.04 mm
• Quadruple tool holder
• All guides can be adjusted by wedge strips
• Right / left rotation in the control panel switchable
• Hardened main spindle mounted in adjustable, precision tapered roller bearings
• Tapered roller bearings in P5 quality
• Hardened spindle nose
• Large spindle bore Ø 38 mm
• Lead screw for thread cutting or automatic longitudinal turning
• Guide and feed shaft stored in two sintered bearings
• Automatic longitudinal / flat feeds
• Lead screw and tension spindle cover
• Tailstock for taper turning ± 5 mm adjustable
• Tailstock quill and handwheel with adjustable fine scale 0.02 mm
• Fast, easy and tool-free adjustment by means of a clamping lever
• Handwheels on the carriage with adjustable fine scale 0.04 / 0.01 mm
• Change wheel set in the standard scope of supply for thread cutting
• Emergency stop impact switch

• Speed change easily adjustable via potentiometer
• Digital speed display
• EMC filter class C1

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Hardened and ground Z-axis guideway
• Guaranteed concentricity of the spindle nose better than 0.015 mm
• Spindle holder Camlock DIN ISO 702-2 No. 8
• Lead screw cover
• Precisely machined slide
• All guides can be adjusted using wedge strips
• Right/left rotation on bed slide switchable via switching spindle
• Two-channel safety electronics
• Upper slide adjustment range ± 90
• Smooth-running, hardened and ground gear wheels mounted on 2 adjustable precision tapered roller bearings
• Clearly arranged selector lever for switching the feed speeds
• Closed design of the high-speed feed gearbox
• Gear wheels and shafts hardened and ground, running in an oil bath in precision bearings
• Handwheels decoupled and tested in accordance with EN 23125
• Safety handwheels with disengagement function in the X-axis
• Handwheels with adjustable fine scaling 0.04 / 0.02 mm
• Safety limit switch with positive opening contacts
• Switch with life cycle calculation, tested in accordance with EN ISO 13849
• Central lubrication in the bed slide
• Emergency stop switch, motor protection switch, lockable main switch
• LED machine lamp
• Energy chain for gentle cable and hose routing
• Emergency stop device with foot control
• Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
• Electric motor brake with quick emergency stop - quick stop without overrun during normal operation
• Electrical system with Siemens components
• Quick-change steel holder SWH 9-D
• 1 steel holder 41 x 180 type D for square chisel 32 mm

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Hardened and ground Z-axis guideway
• Guaranteed concentricity of the spindle nose ≤ 0.015 mm
• Shafts, wheels and main spindle run in an oil bath
• Lead screw cover
• Precisely machined slide
• All guides can be adjusted using gibs
• Mechanical longitudinal feed cut-off of the bed slide with four adjustable eccentrics
• Right/left rotation on the bed slide switchable via switching spindle
• Two-channel safety electronics
• Central lubrication in the bed slide
• Upper slide adjustment range ± 90
• Smooth-running gear wheels, hardened and ground, mounted on 2 adjustable precision tapered roller bearings
• Switch with life cycle calculation, tested in accordance with EN ISO 13849
• Large chip guard with integrated LED machine lamp
• Handwheels with adjustable fine scaling 0.04 / 0.02 mm
• Safety handwheels with disengagement function in accordance with EN23125 in the X and Z axes
• High-speed feed gearbox in closed design, gear wheels and shafts hardened and ground, running in an oil bath in precision bearings
• Scale of the threaded clock adjustable
• Tailstock for taper turning adjustable ± 10 mm
• Tailstock quill and handwheel with adjustable fine scale 0.025 mm
• Quick, easy and tool-free adjustment of the tailstock using a clamping lever
• Cable routing via energy chain
• Heavily ribbed prism bed, induction-hardened and precision-ground from gray cast iron
• Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
• Emergency stop device with foot actuation

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Machine bed made of heavily ribbed cast iron
• One-piece machine base made of steel
• High rigidity of the headstock housing thanks to heavily ribbed 25GG casting
• All gear wheels of the feed gear made of hardened steel
• Shafts on needle bearings, all components are lubricated in an oil bath
• Hardened and ground face spindle ensures enormous accuracy and durability
• High chip removal during roughing is no problem thanks to the high cutting capacity
• Service-friendly removable rear panel
• Energy chain for gentle cable and hose guidance
• Lockable chip guard moves with the bed slide with integrated position indicator and coolant hose, can be moved manually
• Decoupled handwheels tested in accordance with EN 23125
• Two-channel right/left switch tested in accordance with EN 23125
• No change wheels necessary
• Switch with life cycle calculation tested in accordance with EN ISO 13849
• With safety device to prevent simultaneous operation of tapping and feed mechanism
• Bed guides hardened and precision ground
• Electronically braked motor
• Electronic feed cut-off of the Z-axis
• All electronic controls can be reached centrally
• Complete illumination of the work area
• External coolant tank with level indicator and oil separator
• Complete lead and feed spindle cover
• Electric position stop with quadruple position stop
• Three-jaw lathe chuck included as standard
• Quick-change steel holder SWH 7-C
• 1 steel holder 32 x 130 type D for square chisel 25 mm
• Digital position indicator DPA 32-3

TX 5216

• Large spindle bore Ø 80 mm

TX 6222:

• Large spindle bore Ø 105 mm

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Hardened and ground Z-axis guideway
• Guaranteed concentricity of the spindle nose ≤ 0.015 mm
• Spindle holder Camlock DIN ISO 702-2 No. 8
• Two gear stages
• Spindle bore / bar passage Ø 105 mm
• Siemens Sinamics frequency inverter / Safety Integrated
• Lead screw cover
• Precisely machined slide
• All guides can be adjusted using wedge strips
• Right/left rotation on bed slide switchable via switching spindle
• Two-channel safety electronics
• Central lubrication in the bed slide
• Upper slide adjustment range ± 90
• Gear wheels smooth-running, hardened, ground and mounted with 2 adjustable precision tapered roller bearings
• Gear wheels and shafts hardened and ground, running in an oil bath in precision bearings
• Handwheels with adjustable fine scaling 0.04 / 0.02 mm
• Safety handwheels with disengagement function in accordance with EN23125 in the X and Z axes
• Clearly arranged selector lever for switching the feed speeds
• Closed design of the quick-change feed gearbox
• Switch with life cycle calculation, tested in accordance with EN ISO 13849
• Emergency stop impact switch, motor protection switch, lockable main switch
• Emergency stop device with foot actuation
• Tailstock for taper turning ± 10 mm adjustable
• Tailstock quill and handwheel with adjustable fine scaling 0.025 mm. Quick, easy and tool-free adjustment by means of clamping lever
• Heavily ribbed prism bed, induction hardened and precision ground from gray cast iron
• Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
• LED machine lamp in the chip guard
• Energy chain for gentle cable and hose routing
• Adjustable scale on the thread gauge

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Hardened and ground Z-axis guideway
• Guaranteed concentricity of the spindle nose better than 0.015 mm
• Spindle holder Camlock DIN ISO 702-2 No. 8
• Lead screw cover
• Precisely machined slide
• All guides can be adjusted using wedge strips
• Right/left rotation on bed slide switchable via switching spindle
• Two-channel safety electronics
• Central lubrication in the bed slide
• Upper slide adjustment range ± 90
• Smooth-running, hardened and ground gear wheels mounted on 2 adjustable precision tapered roller bearings
• Clearly arranged selector lever for switching the feed speeds
• Closed design of the high-speed feed gearbox
• Gear wheels and shafts hardened and ground, running in an oil bath in precision bearings
• Handwheels decoupled and tested in accordance with EN 23125
• Safety handwheels with disengagement function in the X-axis
• Handwheels with adjustable fine scaling 0.04 / 0.02 mm
• Safety limit switch with positive opening contacts
• Switch with life cycle calculation, tested in accordance with EN ISO 13849
• Emergency stop switch, motor protection switch, lockable main switch
• LED machine lamp
• Energy chain for gentle cable and hose routing
• Emergency stop device with foot control
• Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
• Electric motor brake with quick emergency stop - quick stop without overrun during normal operation
• Quick-change steel holder SWH 9-D
• 1 steel holder 41 x 180 type D for square chisel 32 mm

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Precisely manufactured
• Powerful, maintenance-free engine
• Hardened and ground Z-axis guideway
• Guaranteed concentricity of the spindle nose ≤ 0.009 mm
• Concentricity on the lathe chuck ≤ 0.04 mm
• Lead screw for thread cutting or automatic longitudinal turning
• Leadscrew stored in two sintered bearings
• All guides can be adjusted by wedge strips
• Right / left rotation in the control panel switchable
• Rolled trapezoid spindles
• Thrust bearing
• Tapered roller bearings in P5 quality
• Hardened main spindle mounted in adjustable precision tapered roller bearings
• Hardened spindle nose with Ø 26 mm spindle bore
• Handwheels on the carriage with adjustable fine scale 0.04 / 0.01 mm
• Upper slide on cross slide slidable
• Chip protection on the upper slide
• Heavily ribbed prism bed made of gray cast iron, inductively hardened and precision ground
• Tailstock for taper turning ± 5 mm adjustable
• Tailstock quill and handwheel with adjustable fine scale 0.02 mm
• Quick, easy and tool-free adjustment of the tailstock by a clamping lever
• Emergency stop impact switch
• Quadruple tool holder
• 3-jaw lathe chuck in the standard scope of delivery
• Change gear set in the standard scope of delivery for thread cutting
• Fully equipped, allowing the user to be productive immediately after commissioning
• TU 2506VB: Speed change easily adjustable via potentiometer

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de