Mittaustyökalut

• Tripod MM 2 (x)
• Ideal and flexible positioning of construction lasers when projecting laser lines on walls
• Fits all lasers and photographic equipment with 1/4 thread
• Movable clamping arm can tilt and rotate 360

MH 1 Professional on loodud teie töötõhususe suurendamiseks, võimaldades tööriista kindlalt mis tahes magnetpinna külge kinnitada.
Selle mittejuhtiv kummikate tagab, et mõõtmisi saaks teostada häireteta, tagades kriitiliste ülesannete ajal kindla ja rahuliku meele.
Tugeva magnetjõu abil saate oma elektrilise testimistööriista vabakäekasutuseks ohutult riputada, võimaldades nii hõlpsalt keskenduda käsilolevale ülesandele.
Paindlik konksu ja aasaga rihm lisab mitmekülgsust, võimaldades riputit oma eelistuste järgi reguleerida ning kasutada seda koos erinevate Boschi testimisvahenditega.

Ideaalne elektrikutele ja HVAC-professionaalidele: MH 1 Professional sobib suurepäraselt otse masinates paigutuvate või metallkestadega ümbritsetud kaitsmekilpide kallal töötamiseks.
Boschi testimistööriistadega ühilduv magnetiline riputi on teie tööriistakomplekti täiustav mitmekülgne lisa.

Seadme GLL 18V-120-33 CG usaldusväärne toiteallikas, mis aitab parandada teie tööefektiivsust.
Töötage ilma katkestusteta, lülitudes 18 V akudelt Bosch Professionali 12 V ja 10,8 V akudele.
Suurem paindlikkus kolme toiteallika süsteemi osana, mis võimaldab teil lülituda Boschi 18 V ja 12 V liitiumioonakude ja leelispatareide vahel.

Parandavad rohelise laserkiire nähtavust ja hõlbustavad tööd ebasoodsates valgusoludes.
Sobib kasutamiseks mudeliga GRL 300 HVG SET Professional.

Lihtne ühendada
Integreeritud LED valgusti

Pea läbimõõt: 8,5 mm
Pikkus: 1,2 m

The non-contact voltage tester GVD 1000-17 is a user-friendly tool designed to increase safety and efficiency for professionals working with electricity.

The tool has an IP67 rating and is guaranteed to withstand dust and water immersion, while the robust rubber-coated housing ensures protection against a fall to a height of up to 2 m.

With a dual voltage detection range of 24 V to 1000 V AC and high sensitivity for the 24V range, the voltage tester ensures versatility in a wide range of applications.

The GVD 1000-17 also has an automatic self-test that runs at start-up and every 5 seconds, to confirm that it is working properly during operation.

This ensures reliability and safety that can be relied on when working.

• Robust IP67-rated design for excellent protection against dust and water on the roughest construction sites
• Dual voltage range of 24 V to 1000 V AC or 90 V to 1000 V AC for versatile applications
• Reliable performance with automatic self-test before each use

Scope of delivery:

2 x 1.5 V LR03 battery (AAA)

Key features:

• Length: 400 mm
• Accuracy: ± 0,1 °
• Slope indicator: Yes
• Number of dragonflies: 1
• Magnetic: No
• Measuring range: 0-220 °

Scope of delivery:

4x battery 1.5V LR6 (AA)

Key features:

• Laser type: Cross line laser
• Max. range with receiver: 120 m
• Colour (laser beams): Green
• Accuracy: 0,2 mm/m
• Supplied in: System case
• Type of system case: L-BOXX
• Weight: 0,9 kg
• Max. range: 30 m

Scope of delivery:

Battery and charger not included, laser target plate, universal holder BM1, bag.

Parandavad punase laserkiire nähtavust ja hõlbustavad tööd ebasoodsates valgusoludes.
Sobib mudelitele GRL 400 H; GRL 300 HV; BL 200 GC Professional; kõikidele laserkaugusmõõtjatele.

The GDH 1-17 Professional thermo-hygrometer is the device of choice for accurate environmental measurements.

It provides real-time, minimum and maximum readings of air temperature, relative humidity, dew point, wet bulb temperature and absolute humidity to ensure you have accurate data for your projects.

The high-contrast colour LCD screen makes it easy to read measurements - even in poorly lit environments.

Made for rugged construction sites, the rugged design features a rubber-reinforced housing and an IP65 rating to withstand exposure to dust and water.

• For all measurements of floor heights
• Robust, high-quality aluminium profile
• Extendible up to 5 m
• Also for use under extreme conditions

• Provides confidence by detecting metal, live cables and wooden substructures
• Easy to use with simple mode selection and marking hole
• Built for a rugged working environment thanks to shock-absorbing rubber casing and IP54

Key features:

• Laser type: Cross line laser
• Max. range with receiver: 100 m
• Colour (laser beams): Green
• Accuracy: 0,3 mm/m
• Supplied in: Bag
• Type of system case: Not applicable
• Weight: 0,96 kg
• Max. range: 30 m

Scope of delivery:

• AA1 alkaline battery adapter (1 608 M00 C1B)
• 4 x 1.5 V LR6 battery (AA)
• Bag
• Laser target plate
• Universal holder LB 10 Professional

• 360° horisontaalne joon täpseks joondamiseks terves ruumis
• Täiuslik vertikaalne joon tagab veelgi suurema paindlikkuse
• Rohelised laserijooned: kuni neli korda paremini nähtav ka ereda valgustuse korral
• Täpsed, selgesti nähtavad +/–0,4 mm/m täpsusega laserijooned, iseloodimise vahemikuga
• Ideaalne kardinapuude, pistikupesade ja ripplagede paigaldamiseks
• Seade on varustatud allpool kirjeldatud jätkusuutlike funktsioonidega.

Key features:

• Laser type: Cross line laser
• Max. range with receiver: 120 m
• Colour (laser beams): Red
• Accuracy: 0,2 mm/m
• Supplied in: System case
• Type of system case: L-BOXX
• Weight: 0,9 kg
• Max. range: 30 m

Scope of delivery:

Battery and charger not included, laser target plate, universal holder BM1, bag.

Key features:

• Laser type: Cross line laser; Dot laser
• Max. range with receiver: 50 m
• Colour (laser beams): Green
• Accuracy: 0,3 mm/m
• Supplied in: System case
• Type of system case: L-BOXX
• Weight: 0,59 kg
• Max. range: 25 m

Scope of delivery:

• 1 x battery GBA 12V 2.0Ah (1 600 Z00 02X)
• Quick charger GAL 12V-40 Professional (1 600 A01 9R3)
• L-BOXX 136 (1 600 A01 2G0)
• Laser target plate
• Bag
• Rotary holder RM 20 Professional (1 600 A03 1YN)

The fork current clamp GFM 1000-15 Professional is designed for professionals who need to perform fast and efficient AC current and AC/DC voltage tests.

The open fork design allows AC current up to 200 A to be measured without test pins, saving time and effort.

This all-in-one tool measures AC current, AC and DC voltage up to 1000 V, continuity, resistance and LoZ V AC/DC is integrated.

With IP54 protection and robust housing, it can withstand drop damage up to a height of 2 meters and harsh conditions.

Also, a comfortable handle reduces fatigue during prolonged use, making it an indispensable tool for electricians and HVAC installers.

Scope of delivery:

• Bag
• 2 x 1.5 V LR6 battery (AA)
• MS 90 Professional test pen (1 600 A03 8D2)

The thermal imaging camera GTC12V-450-13 Professional is the designated entry-level model to easily visualise temperature differences.

With a resolution of 256x192px and a bright 2.8" display with full focus on the thermal image, temperature variations in a wide range of scenarios can be quickly analysed.

With its compact design, the tool fits perfectly into any toolbox, ideal for the professional. And with an IP54 rating, drop resistance from a height of up to 2m and a protective cover for the IR sensor, the camera can withstand harsh conditions on construction sites.

Scope of delivery:

• L-BOXX 136 (1 600 A01 2G0)
• L-BOXX inlay machine
• 1 x tool bag
• Quick charger GAL 12V-40 Professional (1 600 A01 9R3)
• 1 x battery GBA 12V 2.0Ah (1 600 Z00 02X)
• USB-C cable (1 600 A01 L6H)

Key features:

• Laser type: Rotating laser
• Max. range with receiver: 2x 150 m
• Colour (laser beams): Green
• Accuracy: 0,1 mm/m
• Supplied in: System case
• Type of system case: L-BOXX
• Weight: 1,8 kg
• Max. range: 2x 50 m

Scope of delivery:

• Laser receiver LR 1G Professional (order number: 0 601 069 700)
• Holder (order number: 1 608 M00 70F)
• L-BOXX 238 (order number: 1 600 A01 2G2)
• 2 x 1.2 V HR20 (D) VARTA rechargeable battery
• 1 x VARTA charger
• 1 x 9V 7HR9V VARTA rechargeable battery