Multifunction saw blade, plunge-cutting, 14 TPI, HCS, 45 mm

Colour matching lamp 2 in 1 + station and charger 99-098 by NEO equipped with LED: COB and a UV diode. It has a colour rendering index CRI>90 and is characterised by the following functions: COB warm - COB natural - COB cool - TOP UV LED-OFF, where the maximum output powers are: 380 lumens (warm) / 350 lumens (natural) / 390 lumens (cool). The operating time, on the other hand, is estimated to be between 4 and 4.5 hours, depending on the selected mode. The lamp has a 3.7V 4000 mAh battery and a 5V 1A power supply. The built-in type C charging port allows the device to be fully charged in 5 hours. The lamp for colour matching car paintwork under natural and UV light will be a must-have for any bodyshop. It will also prove useful in the case of coolant leaks, if the correct doped refrigerant is used beforehand. The unit has an IP67 waterproof rating. Its size is 185 x 50 x 32 mm and its weight (without base) is 245 g. The lamp is offered with a station, charger, hook and base magnet. Recommended for professionals as well as DIY enthusiasts.

GRAPHITE's 125 mm diameter wire wheel brush, twisted steel wire, M14, 57T411 by GRAPHITE is made from twisted steel wire. Equipped with an M14 thread, it is designed for use with angle grinders. The maximum speed of the tool is 12500 rpm. The product meets the requirements of EN 1083-2 and is well suited for roughing metal surfaces, aggressive cleaning, removing rust, paint or dirt.

Water sandpaper 230 x 280 mm, P1200, 58T226 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible C latex backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.

Water abrasive paper GRAPHITE (ref. no. 55H900) in a sheet with dimensions 230 x 280 mm and granulation 150. Designed mainly for wet varnish and plastic grinding applications in automotive industry as well as wood and metal processing. The abrasive paper’s backing is a very flexible latex paper which perfectly adapts to the workpiece. Close coating (100% of the paper surface is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

Grinding discs 125 x 20/16/12.7 x 16 mm, P 60, 2 pieces 57T127 by GRAPHITE have an external diameter of 125 mm and a thickness of 16 mm. The set includes 2 pieces of accessories with a gradation of P 60. The inner diameter of the mounting hole is 12.7 mm, but reductions are included: from 20 to 16 mm and from 16 to 12.7 mm. GRAPHITE brand discs will work well for use on bench grinders. The maximum recommended speed for them is 5350 rpm. They are used for grinding metal, sharpening knives, chisels and other cutting tools, as well as machining and levelling metal surfaces.