3D laser, 16 lines, green, case, target plate, magnetic holder, charger 75-141 by NEO TOOLS is a device with a green laser beam, offering a beam range of up to 25 metres and an accuracy of 1.5 mm/5 metres. It features a light wavelength of 515+/-10 nm and a self-levelling range of 3 degrees. Operating time on a 3.7V 4000 mAh Li-Ion battery is approximately 4 hours. The NEO TOOLS 3D laser has been manufactured to Class II and protection class IP43. The laser power is < 1 mW. The laser is displayed in three planes, including one duplicated horizontally. Offered in a set with a vertical tripod head, swivel head, head with reducer, mounting plate, two rechargeable batteries, remote control, jack, target plate, magnetic holder, charger, USB charging cable and a practical carrying case. The 3D laser from NEO TOOLS has a laser lock function, allowing straight lines to be drawn at any angle and an indication of unleveling by flashing the laser. The product also features CE certification for compliance with EN60825-1:2014, ensuring safe working conditions. Its dimensions are 130 x 90 x 153 mm and weight (without battery) 710 g. It is a lightweight, multi-purpose device for marking precise lines. Essential for the construction industry.
USB type C cable, 2 m GD040 by NEO TOOLS is a cable for charging devices and synchronising data. It is characterised by a maximum charging current of 3.5 A and a length of 200 cm. It has a USB-A input and a USB-C type output. Thanks to the use of a nylon sheath, the NEO TOOLS cable does not get tangled and wears out much slower than competitor products. The USB Type C cable is CE certified.
1" male thread brass quick connector NEO (ref. 12-642) is designed to connect taps with 1" diameter thread. It ensures tight and durable connections. It is suitable for use in agriculture, industry and garden. The connector has been made of brass which will enable it to work for many years.
4 ply NEO garden hose made from flexible PVC and reinforced with polyester yarn. Perfect for maintenance work in small and large garden areas including cleaning outdoor furniture and tools. Resistant to algae build-up and UV rays, which extends its life.
Leaf rake large, plastic 95-041 by NEO TOOLS features a width of 480 mm and a length of 430 mm. The diameter of the handle mounting hole is 25 mm and the recommended diameter of the handle itself is 23 mm. They are made from 300k moplene. They have a light weight and are durable. Thanks to the easy exchange of the handle, they can share the handle with other tools for the garden and in agriculture.
Fingerless Magnetic Work Gloves, Size 10" NEO (Ref. GD014) have a magnet on the back to keep screws, nuts and other small parts close at hand for the do-it-yourselfer while working. Three exposed fingertips allow for precise work. Fingertips and wrists are protected by a rubber coating which acts as a shock absorber and reduces abrasion. Velcro on the wrist allows to adjust the circumference. The gloves comply with the EN 388 standard. Available in size 10".
Dirty water submersible pump 900 W, capacity 16 000 l/h 04-746 by NEO TOOLS is a practical device for pumping water out of buildings or basements, as well as for delivering water from intakes (e.g. wells) to destinations. It is characterised by 900 W power and a capacity of up to 16,000 l/h. The maximum immersion depth of the NEO TOOLS pump is 7 m and the maximum water rise is 9 m. The unit leaves 30mm of water after pumping and the largest possible diameter of dirt handled must not exceed 25mm. The NEO TOOLS submersible pump is made of aluminium (motor housing), as well as glass fibre reinforced nylon (for the main housing). The maximum supported water temperature is 35 degrees Celsius. The unit also features a ceramic spindle seal and a long 10-metre rubber power cable. It supports spigot diameters of ∅25, ∅32, 1", 1 ½". The dirty water submersible pump from NEO TOOLS is a useful solution for the work of a builder, plumber, farmer, as well as anyone who needs to pump out a large amount of water in a short time.
The Dirty Water Submersible Pump 900 W 04-735 by NEO TOOLS is a submersible pump for dirty water, offering a liquid flow rate of 17,000 litres per hour. The maximum height of water handled is 9 m, the maximum depth is 7 m and the maximum diameter of dirt is 25 mm. The pump has been manufactured from stainless steel. It is offered with 1" and 1 ½" water line connections. The unit is suitable for domestic and professional tasks.
The 1600 W 38 cm 04-628 mower by NEO TOOLS is a 1600 W belt-driven mowing device that allows grass to be cut at 25, 35, 45, 55, 65 or 75 mm (thanks to a 6-stage central adjustment). Equipped with 150 mm (front) and 200 mm (rear) wheels. The NEO TOOLS mower has a practical folding handle. It is characterised by the functions of mowing into a basket, mulching or mowing with ejection to the outside. Thanks to the "combing" function, it allows for more efficient mowing of the lawn. The unit also has a transport handle on the body for easier use and a soft grip handle for comfortable working. The NEO TOOLS mower is equipped with a reinforced grass container with a capacity of 45 litres. Thanks to a full hopper indicator, the user is informed when it should be emptied. This is a device that will prove useful both in the home garden and in professional gardening applications.
The Dirty Water Submersible Pump 1100 W 04-736 by NEO TOOLS is a submersible pump for dirty water, offering a liquid flow rate of 18,000 litres per hour. The maximum height of water handled is 9.5m, the maximum depth is 7m and the maximum diameter of dirt is 25mm. The pump has been manufactured from stainless steel. It is offered with 1" and 1 ½" water line connections. The unit is suitable for domestic and professional tasks.
The Energy+ 18-volt 04-620 cordless compressor by NEO is an oil-free device that functions with the Energy+ battery system. It features a tank capacity of 3.8 litres, a maximum pressure of 8 bar and an output of 14 litres/minute. The NEO compressor is recommended for pumping, blowing off dirt and powering small pneumatic tools. It will be useful for automotive fans, mechanics, screwed-in hobbyists and for home use. The unit has an idle time of 10 minutes with 2 Ah batteries, 20 minutes with 4 Ah batteries and 30 minutes with 6 Ah batteries. A device recommended for many tasks.
Dirty water submersible pump 400 W, capacity 8,000 l/h 04-745 by NEO TOOLS is a practical device for pumping water out of buildings or basements, as well as supplying water from intakes (e.g. wells) to destinations. It is characterised by a power of 400 W and a capacity of up to 8,000 l/h. The maximum immersion depth of the NEO TOOLS pump is 5 m and the maximum water rise is 7 m. The unit leaves 30 mm of water after pumping and the largest possible diameter of dirt handled must not exceed 25 mm. The NEO TOOLS submersible pump is made of aluminium (motor housing), as well as glass fibre reinforced nylon (for the main housing). The maximum supported water temperature is 35 degrees Celsius. The unit also features a ceramic spindle seal and a long 10-metre rubber power cable. It supports spigot diameters of ∅25, ∅32, 1", 1 ½". The dirty water submersible pump from NEO TOOLS is a useful solution for the work of a builder, plumber, farmer, as well as anyone who needs to pump out a large amount of water in a short time.
The 1800 W 44 cm 04-629 mower by NEO TOOLS is an 1800 W belt-drive mowing machine that allows grass to be cut at a height of 25, 35, 45, 55, 65 or 75 mm (thanks to a 6-stage central adjustment). Equipped with 170 mm (front) and 220 mm (rear) wheels. The NEO TOOLS mower has a practical folding handle. It is characterised by the functions of mowing into a basket, mulching or mowing with ejection to the outside. Thanks to the "combing" function, it allows for more efficient mowing. The device also has a transport handle on the body for easier use and a soft grip handle for comfortable working. The NEO TOOLS mower is equipped with a reinforced grass container with a capacity of 45 litres. Thanks to a full hopper indicator, the user is informed when it should be emptied. This is a device that will prove useful both in the home garden and in professional gardening applications.
The SDS Plus 12 x 600 mm, quatro 54-122 reinforced concrete drill bit by NEO TOOLS is an accessory characterised by a diameter of 12 mm and an overall length of 600 mm and a working length of 530 mm. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks), it is ideal for working in reinforced concrete. The cross-cut bit is made of fine-grain carbide. This robust tool from NEO TOOLS is recommended for intensive use by professionals.
Hose Reparator 3/4 to 1/2, 15-728 by NEO TOOLS is a two-material connector made of high-quality plastic, providing an excellent adapter for connecting ¾" and ½" hoses into a single irrigation line. The reparator is designed to connect garden hoses into watertight connections preventing water leakage, facilitating quick and comfortable connection and disconnection of various types of sprinkler devices in gardens and on terraces.
Welding pliers type "W", 225 mm 32-458 by NEO TOOLS with a length of 225 mm, provide a secure grip and stable positioning of workpieces during welding and assembly work. The working range of 0-45 mm allows adjustment to different workpiece thicknesses for easy positioning and holding during joining. The compact size promotes convenient working in the workshop and in the field, while the simple design allows for fast, repeatable gripping and clamping operations.
The 3/8" HEX (0.95 cm) soil auger, 80 x 600 mm, for screwdriver 56-782 by NEO TOOLS is a screwdriver accessory for drilling holes in the soil during gardening and installation work. Equipped with a 3/8" HEX chuck (0.95 cm), it is compatible with various types of screwdrivers, allowing fast and precise drilling without the use of hand tools. The overall length of the auger is 600 mm, of which 240 mm is the working part, and the working diameter of 80 mm allows the preparation of holes for planting plants, bulbs, shrubs and trees, as well as for the installation of stakes or the installation of irrigation systems. The steel construction, the 27 mm wide, 2.6 mm thick blade and the 12.5 mm diameter forked drill bit ensure stable operation in the soil and effective penetration into the ground.
The sabre saw blade, HM, 240 x 22.5 x 1.5 mm, 2 TPI 58-030 by NEO TOOLS, measuring 240 x 22.5 x 1.5 mm, with 2 TPI toothing (12.7 mm pitch), is designed for cutting brick (<190 mm) and cellular concrete. The carbide (HM) blades provide durability in abrasive materials and the design allows for precise angled cutting. This sabre saw blade from NEO TOOLS is suitable for a wide range of applications requiring fast, straightforward guidance and tool resistance.
Nails for stapler 58G081, GA18 Type 90, length 25 mm, 400 pcs. 56-761 by NEO TOOLS are 400-pack nails, 25mm long and 1.25mm thick. They are designed for precision assembly and finishing work and are compatible with the 58G081 stapler. They feature type 90 GA18.
