OPTIMUM

• Electromagnetic clamping plate for fixing the workpiece with automatic demagnetization function
• High-quality spindle with precision taper roller bearings
• Hardened and ground table guideways
• Turcite-B-coated counter-guides for high wear resistance and low friction
• Grinding spindle with high-quality precision bearings
• Grinding wheel can be resharpened directly on the machine using a puller device
• Digital position indicator
• Machine base made of stable, torsion-resistant cast iron for maximum rigidity and stability
• Guideways of the longitudinal and transverse grinding wheels, Lateral and vertical movements are backlash-free and self-centering as V- and flat track design
• Precision ball screws
• Guideways and transport spindle with central lubrication
• All flat tracks are finely scraped and thus guarantee highest precision of all manual movements
• Safety electrical system in 24 V direct voltage
• Largely dimensioned decoupled handwheels in all three axes
• Hydraulic lines according to DIN EN 853
• Grinding accuracy: 0.005 mm
• Corundum grinding wheel grain 46 for all common steels
• Swivelling control panel makes work considerably easier
• Separate hydraulic unit with heat exchanger, avoids vibrations and thermal stress
• Twin-channel safety electronics
• Sliding table splash protection
• EMV filter class
• With IE3 motor - consumes considerably less energy and thus significant cost savings

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• For mechanical workshops and repair shops
• For pressing in and out of bearings, thorns, bushings, spindles, pins
• Stable construction
• Body made of high quality gray cast iron
• Variable adjustable lever rod
• Quadruple positionable base plate
• For mounting on a workbench

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Best power transmission through aluminum pulleys
• Digital speed indicator integrated in the housing, speed control by potentiometer
• Emergency stop impact switch
• Drill spindle with precision ball bearings
• High quality OPTIMUM keyless chuck as standard
• Guaranteed concentricity accuracy less than 0.03 mm measured at the drilling spindle
• Height-adjustable feed guard with microswitch
• Dirt and water resistant membrane keypad, easy to clean
• Precision machined drill table with parallel T-slots
• Thick-walled cast-iron column for high power absorption and stability
• Massive base plate, large dimensions, strongly ribbed on the back
• EMC filter class C2

DX 13V

• Height adjustable drill head

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Precisely machined drilling table, ± 45° sideways tiltable and 360° rotatable
• Massive, large dimensioned base plate with grooves, heavily ribbed at the backside
• Ground multi-tooth driver
• Best power transmission through aluminium pulleys in combination with toothed GATES quality V-belt
• Guaranteed concentricity accuracy better than 0.03 mm measured in the drill spindle
• Drill spindle with precision ball bearing
• Quick action drill chuck as standard equipment
• Belt cover with safety switch
• Easy to use switch according to IP 54
• Separate emergency stop pushbutton switch

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Guaranteed concentricity ≤ 0.02 mm measured in the drill spindle
• Drill spindle with precision ball bearing
• High-quality quick-action drill chuck
• Work table adjustable from +45° to -45°

• Guaranteed concentricity ≤ 0.02 mm measured in the drill spindle
• Drill spindle with precision ball bearing
• High-quality quick-action drill chuck
• Height-adjustable chuck protection cover
• Work table adjustable from +45° to -45°
• With high practical performance

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Heavy-duty version
• Highly quiet running thanks to new spindle design
• Industrial motor
• Separate emergency-stop pushbutton
• Digital depth gauge
• LED machine light integrated in drill head
• Precisely machined, Stable drilling table with diagonally running T-slots with circulating cooling water channel
• Drilling table inclinable ± 45° and rotatable 360°
• V-belt cover with safety switch
• Precision spindle bore
• Machine operation Safety electrics in 24 V DC voltage
• Guaranteed concentricity ≤ 0.02 mm measured in the drilling spindle
• Thick-walled steel column for high force absorption and stability
• Massive, large dimensioned base plate with T-slots

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Heavy, solid
• cast
• designQuality industrial electric motorHighly
• smooth running thanks to ground gear wheels running in an oil
• bathRight/left
• rotationMassive
• and generously dimensioned cross table, with T-slots and adjustable gibsDrilling
• depth
• stopManual
• spindle sleeve feed with fine
• feedAdjustable and readjustable feed spindle playOperator-friendly
• control panel with emergency stop switchColumn
• with hand-scraped dovetail guideHeight-adjustable
• , large protective screen with microswitch
• Wide speed range from 95 - 3200 min¯¹ with two stages, electronically controlled

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Heavy, durable industrial design with maintenance-free motor
• Housing made of extruded aluminum
• Long life and smooth running due to balanced rotor with
  Quality ball bearings
• Vibration damping rubber feet
• Two wide polishing wheels in the standard scope of delivery

Balanced rotor

• Long lifetime
• Very smooth running
• Quality ball bearings

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Quiet running
• Heavy cast iron version
• Hard carbide guide
• High cutting accuracy due to vibration-free running
• Double miter
• DIN EN 55011: EMC class C2
• Double-channel safety chain with quick stop in case of emergency hold
• Variably adjustable saw blade speed
• Variable by frequency inverter
• Professional inverter technology
• High motor power even at low speeds
• Microswitch for automatic limit switch-off
• Precise, readjustable and long-lasting saw blade guide
• End stops adjustable to the degree
• Chips brush
• Coolant pump
• Quick clamping vice adjustable via handwheel. Clamping of the workpiece with handy quick-action clamping lever
• Stable machine base
• Operating unit simplifies machine settings
• Completely equipped, enabling the user to work productively immediately after commissioning
• Infinitely adjustable saw band speed 15 - 90 m/min

Converter

• Siemens Sinamics G110M

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Smooth-running and powerful brushless drive
• Guaranteed concentricity ≤ 0.02 mm measured in the drill spindle
• The work table can be adjusted from +45° to -45

• Smooth-running and powerful brushless drive
• User-friendly safety switch in accordance with IP 54
• Long, ergonomic quill lever with handles
• Drilling depth stop
• V-belt cover with safety switch
• Guaranteed concentricity ≤ 0.02 mm measured in the drill spindle
• Drill spindle with precision ball bearing
• High-quality quick-action drill chuck
• Large, height-adjustable chuck protection cover
• The work table can be adjusted from +45° to -45°

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Heavy, durable industrial design with maintenance-free motor
• Long service life and smooth running due to balanced rotor with quality ball bearings
• Shelf surface for safety goggles

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Smooth and powerful industrial electric motor
• Separate emergency stop impact switch
• Stable casting column
• Measurement scale for drilling depth
• Precisely machined drill table with diagonal T-slots and circumferential cooling water channel
• Drilling table 360 ​​° rotatable
• V-belt cover with safety switch
• V-belt quick-clamping device
• Long, ergonomic cast aluminum sleeve lever cast in one piece (B 16H / B 24H with softgrip handles)
• Massive, large base plate with grooves, strongly ribbed on the back
• By swinging away the drilling table, base plate can be used as a work surface for particularly high workpieces
• Guaranteed concentricity measured better than 0.015 mm in the drill quill
• Drill spindle with precision ball bearings
• High-quality OPTIMUM keyless chuck in the standard scope of delivery
• Large, height-adjustable protective screen with safety switch

belt drive

• Smooth running thanks to ground multi-tooth driver
• Best power transmission through aluminum pulleys in conjunction with toothed GATES quality V-belt

machine light
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Guaranteed concentricity ≤ 0.02 mm measured in the drill spindle
• Drill spindle with precision ball bearing
• Work table adjustable from +45° to -45°

• Guaranteed concentricity ≤ 0.02 mm measured in the drill spindle
• Drill spindle with precision ball bearing
• Gear rim chuck for secure clamping
• Large, height-adjustable chuck protection cover
• Work table adjustable from +45° to -45°
• With high practical performance

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Smooth and powerful electric motor
• Two speed levels
• Forward / reverse operation
• V-belt cover with safety switch
• Digital speed indicator integrated in the housing
• Concentricity guaranteed less than 0.015 mm measured in quill
• Height-adjustable feed guard with microswitch for the utmost protection of the user
• Machine light integrated in the drill head
• Drill spindle with precision ball bearing
• High quality keyless chuck as standard
• Precision machined drilling table with diagonally running T-slots, 360 ° rotatable with circulating cooling water channel
• Thick-walled cast-iron column for high power absorption and stability
• Massive base plate, large dimensions heavily ribbed on the back
• Base plate usable by pivoting away the drilling table as a work surface for particularly high workpieces

From DH 28BV

• Easy tool change through integrated expeller
• Quillons made of steel

DH 40BV

• Digital depth gauge
• Countershaft transmission allows a much higher torque

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Smooth and powerful brushless drive
• Separate emergency stop impact switch
• Large, height-adjustable protective screen with safety switch for the utmost protection of the user
• Long, ergonomic aluminum die-cast quill lever
  One piece cast (B 24HV with softgrip handles)
• Measurement scale for drilling depth
• Belt cover with safety switch
• Forward / reverse operation
• Machine light

From OPTIdrill B 28HV

• Quillons made of steel
• Coolant system
• Chip filter according to the Machinery Directive
• Easy tool change through integrated expeller

OPTIdrill B 34HV

• Quill stroke 160 mm
• Tapping function
• Digital depth gauge

Special feature of the OPTIdrill B 34 HV

• Operating mode "auto"
  • Engine starts automatically after lever movement
  • Stops again in the starting position
  • Pushbutton Start and Stop does not have to be pressed during repetitive drilling tasks
• Operating mode "tapping"
  • Engine is activated by moving the handle down
  • The direction of rotation is changed by limit switches on the adjustable drilling depth stop

Equipmentdetails
Powerful brushless drive

• Especially quiet running
• High performance
• Approximately constant torque over the entire speed range

Belt drive

• Best power transmission through aluminum pulleys in conjunction with toothed GATES quality V-belt
• Smooth running thanks to ground multi-tooth driver

Digital speed display

• integrated in the housing

Speed control

• by means of potentiometer

Concentricity

• Guaranteed ; 0.015 mm measured in the quill

Spindle

• Precision ball bearings
• High quality OPTIMUM keyless chuck as standard

V-belt tensioning device
Machine light

• Integrated in the drill head
• Halogen lamp

Drilling

• Precisely worked
• Diagonal T-slots
• 360° rotatable
• Circulating cooling water channel

baseplate

• Solid
• Large dimensions
• Heavily ribbed on the reverse side

cast column

• Thick-walled
• High power and stability

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Best power transmission thanks to aluminum pulleys in conjunction with toothed GATES quality V-belt
• Smooth running thanks to ground multi-tooth driver
• Guaranteed concentricity of less than 0.015 mm measured in the drill sleeve
• High-quality OPTIMUM quick-action drill chuck as standard
• Drilling depth stop
• V-belt tensioning device
• Right/left rotation

• Powerful brushless drive with particularly smooth running and high performance with almost constant torque over the entire speed range
• Best power transmission thanks to aluminum pulleys in conjunction with toothed GATES quality V-belt
• Very smooth running thanks to ground multi-tooth driver
• Guaranteed concentricity of less than 0.015 mm measured in the drill sleeve
• Separate emergency stop switch
• High-quality OPTIMUM quick-action drill chuck as standard
• Large, height-adjustable protective screen with safety switch for maximum user protection
• Drilling depth stop
• V-belt cover with safety switch
• V-belt tensioning device
• Right/left rotation
• Machine light integrated in the drill head
• Precisely machined, stable drill table with 2 diagonal T-slots, 360° rotatable and all-round cooling water channel
• Thick-walled cast column for high force absorption and stability
• Solid base plate, large dimensions and heavily ribbed on the back

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Heavy, one-piece, heavily ribbed and wide machine bed
• Induction-hardened and ground guideways
• Solid headstock with high-precision, tapered roller bearing main spindle impresses with outstanding stability under load
• Very smooth running at maximum spindle speed
• All gears are large, hardened and ground
• Joystick control for X and Z feed directly on the support
• Manually shifted 4-step countershaft gearbox, high-quality frequency control technology
• Rapid traverse for X- and Z-axis enables fast positioning of the support and reduces non-productive time
• Adjustable overload clutch in the lock box protects the feed mechanism from damage and failure
• The table can be tilted for conical sanding processes - the scale enables precise adjustment to the desired position
• The spindle head tilts from 0 to 90° for conical sanding operations
• The longitudinal guide of the table and the cross guide of the sanding spindle material are each equipped with V and flat guides
• The sanding spindle has bearings on both sides and adjustable flat grids
• Swivel spindle shaft (up to 180°) for internal sanding work

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Modern design in stable steel construction
• High design flexibility thanks to segmented edging rail with removable segment pieces
• Operation via two laterally arranged, large, adjustable and easy-to-operate lever arms
• Scissor table with inserted measuring tapes and right-angled stop on both sides
• Easily adjustable top, rear and bottom roller
• Long contact surface
• Adjustable backgauge and extendable front material support for the safe placement of even large format sheets

Turn around

• Adjustment screws for the material thickness with scaling
• Ground bending rolls with wire-laying grooves on the lower and front rolls

folding

• High quality folding cheeks
• Feather-down device
• Segment split edge rail 40/50/65/100/180/255/380 mm for cassette bending

To cut

• Clean and burr-free cutting by upper and lower blades made of quality steel

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Separate emergency stop stop switch
• Measurement scale for drilling depth
• Precisely machined, stable drilling table with diagonally running T-slots and circumferential cooling water trough
• Drilling table ± 45° inclinable and 360° rotatable
• One-piece die-cast aluminium quill lever with soft-grip handles
• Prezision spindle drilling
• Safety electrics in 24 V DC voltage
• Guaranteed concentricity accuracy of less than 0.03 mm measured in the drilling sleeve
• Drilling spindle with preprecision ball bearings
• High-quality quick-action drill chuck
• GATES quality belt
• Largely dimensioned base plate with T-slots, heavily ribbed on the rear side
• Largely dimensioned, height-adjustable protective screen with
• Right/left rotation

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Powerful induction motor for quiet and low-vibration work
• Adjustable workpiece support
• Sturdy steel housing

• Powerful induction motor for quiet and low-vibration work
• Adjustable workpiece support
• Sturdy steel housing
• Adjustable spark guard protects against flying parts without impairing visibility
• Equipped with K 36 and K60 sanding discs

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de