Äskettäin katsotut tuotteet
52-2091662
- Screw compressor with ribbed belt drive
- Start-stop operation via pressure switch, thereby saving energy compared to idling control
- Minimal and easy maintenance
- Ready for connection with all fittings
- Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank
- Easily transportable and deployable thanks to the safety pallet.
- KK version as standard with automatic steam trap for the reliable and economical discharge of the condensate without unnecessary loss of compressed air
- K and KK version with refrigeration dryer as standard with pressure dew point at 3 °C, ambient temperature 25 °C
Increased flexibility- Enabling the second compressed air vessel doubles the pressure vessel volume, thus creating a greater compressed air reserve. Helps to cover short-term peaks in compressed air requirements
- For, e.g., chisel, hammer or sandblasting work, the second vessel can be isolated from the compressed air supply. This halves the vessel volume helping to build up the pressure more quickly.
ManufacturerAircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at
52-2500900
- Compressed air tank according to AD 2000 / without fitting set / 11 and 16 bar
- Hot dip galvanized inside and outside
- Constructed in accordance with EC Directive 87/404 / EEC or PED 97/23 / EC -AD 2000, Module: H / H 1
- Operating conditions according to AD 2000 - S1 (10/2000) = arrivals and departures and 20% pressure fluctuation range
- ISO 9001:2015 certified manufacturer
ManufacturerMaschinen- und Behälterbau GmbH
Betzdorfer Straße 170, 57567 Daaden, Germany
www.mabe.de
52-2048018
- Absorbed oils are reliably bound in hermetically sealed cartridges - no contact with contaminants
- Easy adjustment to changing compressed air and condensate requirements
- Condensate is actively pressed through the pre-filter and main filter with light blasts of compressed air
- Permanent function monitoring
- Fail-safe mode in the event of a power failure and loss of compressed air: QWIK-PURE continues to work like conventional gravity separators
QWIK-PURE series
- Absorbed oils are reliably bound in hermetically sealed cartridges - no contact with contaminants
- Simple, clean and ergonomic cartridge replacement
- Simple adjustments to changing compressed air and condensate requirements
- Sizing according to service interval or compressor capacity
From QWIK-PURE 15
- Condensate is actively pressed through the pre-filter and main filter with light blasts of compressed air
- Permanent function monitoring
- Integrated FRC control unit: reliable display of the remaining capacity of the cartridges and automatic monitoring of when condensate needs to be pushed through with light blasts of compressed air
- Integrated monitoring optimally utilizes the cartridges
- Remote monitoring possible thanks to network capability
- No overflowing of the system thanks to active operating principle with automatic drainage
- Fail-safe mode in the event of power failure and loss of compressed air: independent initiation of measures and triggering of alarms in the event of problems. For safe operation, QWIK-PURE then continues to work like conventional gravity separators.
ManufacturerBEKO Technologies GmbH
Im Taubental 7, 41468 Neuss, Germany
www.beko.de
52-2500505
- Hot-dip galvanised inside and outside with fifteen-year warranty against rusting through
- Built according to EC Directive 87/404/EEC or DGRL 97/23/EC -AD 2000, module: H / H 1
- operating conditions according to AD 2000 - S1 (10/2000) = starts and stops and 20% pressure fluctuation range
ManufacturerAircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at
52-2048011
function Description
- For treatment, the oil-containing condensate first passes under pressure into the pressure relief chamber.
- There, the overpressure is reduced, without causing turbulence in the subsequent separation tank for free oil separation.
- Carried coarse dirt particles are retained in a removable catch.
- In the separation tank, the oil settles on the surface through gravity separation and is led into the overflow-proof oil catch tank (version available on request).
- The filter makes the difference: The pre-cleaned condensate flows through the oleophilic pre-filter, which has a large active filter area. Flowing through from the inside to the outside, it binds the remaining oil droplets and also absorbs residual, floating oil in the filter chamber.
- In the OEKOSORB® main filter with cartridge technology, the last oil components are reliably retained. What remains is water for direct discharge into the sewage system.
The advantages at a glance
- System-compatible size
- Installation on wall possible with ÖWAMAT® 10 and ÖWAMAT® 11
- Long service life of the filter units
- Easy retrofitting of a heater at any time
- Easiest handling by cartridge technology
- Type approval with and without free oil separation
- No energy costs
Manufacturer
BEKO Technologies GmbH
Im Taubental 7, 41468 Neuss, Germany
www.beko.de
