Loctite 270 on suure tugevusega anaeroobne keermeliim, mis on mõeldud püsivaks keermete lukustamiseks. See takistab kruvide ja poltide lahtitulekut vibratsiooni ja löökide tõttu.
Omadused:
Kõrge tugevus – sobib ühendustele, mida ei ole vaja regulaarselt lahti võtta
Anaeroobne kõvenemine – kõveneb õhupuuduses metallpindade vahel
Sobib kõikidele metallidele, sh roostevaba teras, alumiinium ja tsingitud pinnad
Roheline värvus
Töötemperatuur: -55 °C kuni +150 °C
Kasutusvalmis 50 ml pudelis
Kasutusalad:
Poldid, mutrid, tihvtid ja puksid, mis vajavad pikaajalist fikseerimist
Mootorid, pumbad, käigukastid ja muud vibratsioonile alluvad seadmed
Loctite 406 on väga madala viskoossusega tsüanoakrülaatliim, mis on mõeldud plastide ja kummide kiireks liimimiseks. Sobib eriti hästi EPDM-kummi ja teiste elastomeeride liimimiseks.
Omadused:
Väga kiire nakkumine: 2–10 sekundit
Väga madal viskoossus – sobib täpseteks liimimistöödeks
Läbipaistev ja värvitu
Töötlemistemperatuur: -40 °C kuni +80 °C
Maksimaalne lõhe täitmine: kuni 0,05 mm
Pakend: 20 g plastpudel
Kasutusalad:
Plastide ja kummide liimimine (sh EPDM)
Sobib kasutamiseks koos Loctite 770 või 7239 kruntidega, et parandada nakkumist raskesti liimitavate plastide puhul
Ohutus:
Tsüanoakrülaat. Liimib naha ja silmad sekunditega.
PENOSIL All Weather Sealant 919 on silikoonivaba koheselt veekindel kautšukipõhine hermeetik, mida saab kasutada kiireteks fassaadi ja katuse remonditöödeks isegi vihma ajal. Nakkub hästi enamiku tavaliste katusekattematerjalidega, saab kanda ka niisketele, kergelt õlistele ja bituumenpindadele.
Omadused:
Suurepärane nakkuvus paljudele pindadele: tellis, betoon, puit, metall, klaas, plastid.
Ei sobi kasutamiseks polüetüleeni (PE), polüpropüleeni (PP) ega PTFE (Teflon®) pindadel.
Ei soovitata loodusliku kivi (nt marmor, graniit) tihendamiseks.
Võib muutuda kollakaks, kui on pikalt vee all – see ei mõjuta toimivust.
Kasutusvaldkonnad:
Katuse- ja fassaaditööd
Klaasimistööd
Paisumis- ja ühendusvuukide tihendamine
Pakend: 300 ml plastpadrun
Kitsendused:
Ei nakku polüetüleeni (PE), polüpropüleeni (PP) ega PTFE (Teflon®).
Ärge kasutage temperatuuril alla -5 °C.
Ei ole soovitatav kasutada loodusliku kivi, nt marmori ja graniidi, tihendamiseks.
Kui tihendatud ala on pikemat aega vee all, võib hermeetik muutuda kollakaks. Värvimuutus ei mõjuta siiski hermeetiku toimivust.
Lahustipõhise värviga värvimisel võib hermeetiku kuivamisaeg pikeneda.
PENOSIL All Weather Sealant 919 on silikoonivaba koheselt veekindel kautšukipõhine hermeetik, mida saab kasutada kiireteks fassaadi ja katuse remonditöödeks isegi vihma ajal. Nakkub hästi enamiku tavaliste katusekattematerjalidega, saab kanda ka niisketele, kergelt õlistele ja bituumenpindadele.
Omadused:
Suurepärane nakkuvus paljudele pindadele: tellis, betoon, puit, metall, klaas, plastid.
Ei sobi kasutamiseks polüetüleeni (PE), polüpropüleeni (PP) ega PTFE (Teflon®) pindadel.
Ei soovitata loodusliku kivi (nt marmor, graniit) tihendamiseks.
Võib muutuda kollakaks, kui on pikalt vee all – see ei mõjuta toimivust.
PENOSIL All Weather Sealant 919 on silikoonivaba koheselt veekindel kautšukipõhine hermeetik, mida saab kasutada kiireteks fassaadi ja katuse remonditöödeks isegi vihma ajal. Nakkub hästi enamiku tavaliste katusekattematerjalidega, saab kanda ka niisketele, kergelt õlistele ja bituumenpindadele.
Omadused:
Suurepärane nakkuvus paljudele pindadele: tellis, betoon, puit, metall, klaas, plastid.
Ei sobi kasutamiseks polüetüleeni (PE), polüpropüleeni (PP) ega PTFE (Teflon®) pindadel.
Ei soovitata loodusliku kivi (nt marmor, graniit) tihendamiseks.
Võib muutuda kollakaks, kui on pikalt vee all – see ei mõjuta toimivust.
Kasutusvaldkonnad:
Katuse- ja fassaaditööd
Klaasimistööd
Paisumis- ja ühendusvuukide tihendamine
Pakend: 300 ml plastpadrun
Värv: Must
Kitsendused:
Ei nakku polüetüleeni (PE), polüpropüleeni (PP) ega PTFE (Teflon®).
Ärge kasutage temperatuuril alla -5 °C.
Ei ole soovitatav kasutada loodusliku kivi, nt marmori ja graniidi, tihendamiseks.
Kui tihendatud ala on pikemat aega vee all, võib hermeetik muutuda kollakaks. Värvimuutus ei mõjuta siiski hermeetiku toimivust.
Lahustipõhise värviga värvimisel võib hermeetiku kuivamisaeg pikeneda.
PENOSIL AquaBrake Fabric 435 is a polyester-based reinforcement fabric designed for hydro-insulating walls and floors in wet and humid areas such as:
Bathrooms
Saunas
Kitchens
Balconies
Terraces
It enhances the performance of waterproofing mastics and sealants, ensuring a watertight and flexible sealing layer that bridges cracks and prevents moisture penetration.
Key Features:
Completely watertight
Elastic and vapour impermeable
Crack-bridging capability
Suitable for heated floors
Easy to cut and shape
Compatible with Penosil AquaBrake Fiber 640 mastic
For interior and exterior use
Applications:
Reinforcing and sealing:
Floor drains
Pipe penetrations
Wall and floor joints
Corners
Installation Instructions:
Cut the fabric to the required size, allowing 5–7 cm overlap at edges.
Apply the first layer of Penosil AquaBrake Fiber 640 mastic.
Press the fabric into the fresh mastic using a putty trowel, avoiding air bubbles.
Cover with a second layer of mastic, ensuring full immersion.
Special Reinforcement Guidelines:
Corners: Use at least a 20 cm wide strip.
Joints: Use at least a 10 cm wide strip.
Floor traps: Use fabric at least 3× the diameter of the opening, preferably in two layers.
Pipe penetrations: Cut fabric with a diameter 3× larger than the pipe. Make a hole 4–5 mm smaller than the pipe diameter so the fabric overlaps the pipe by 3–5 mm.
Surface Preparation:
Surfaces must be clean, dry, and free of dust, loose particles, and oil residues.
Prime concrete, cement, and plaster surfaces with PENOSIL BetPrimer 603.
PENOSIL AquaBrake Fabric 435 is a reinforcement fabric designed for hydro-insulating walls and floors in wet and humid areas such as:
Bathrooms
Saunas
Kitchens
Balconies
Terraces
It enhances the performance of waterproof sealants and mastics, making it ideal for use before tiling and other finishing works.
Key Features:
Completely watertight
Elastic and vapour impermeable
Bridges cracks
Suitable for heated floors
Easy to use and cut into any shape or size
For interior and exterior use
Applications:
Sealing and reinforcing:
Floor drains
Wall and floor joints
Pipe penetrations
Corners
Installation Instructions:
Cut the fabric to the required size, allowing 5–7 cm overlap at edges if needed.
Apply the first layer of Penosil AquaBrake Fiber 640 mastic.
Press the fabric tightly into the fresh mastic using a putty trowel, avoiding air bubbles.
Cover with a second layer of mastic, ensuring full immersion.
Special Reinforcement Guidelines:
Corners: Use at least a 20 cm wide strip.
Joints: Use at least a 10 cm wide strip.
Floor traps: Use fabric at least 3× the diameter of the opening, preferably in two layers.
Pipe penetrations: Cut fabric with a diameter 3× larger than the pipe. Make a hole 4–5 mm smaller than the pipe diameter so the fabric overlaps the pipe by 3–5 mm.
Surface Preparation:
Surfaces must be clean, dry, and free of dust, loose particles, and oil.
Prime concrete, cement, and plaster surfaces with PENOSIL BetPrimer 603 before applying.
The PENOSIL FoamGun F1 is a professional-grade polyurethane foam gun designed specifically for sealing and insulating between insulation boards and other extra-narrow gaps. It offers high durability, precision, and ease of use, making it ideal for both professional and DIY applications.
Key Features:
Designed for narrow joints – Perfect for sealing between tightly fitted insulation boards and hard-to-reach gaps.
2-in-1 functionality – Can be used with or without the included narrow brass barrel extensions.
Included extensions
Length: 45 mm
Diameter: Ø 2.45 mm
Extrusion rod length: 184 mm
Lightweight plastic handle – Ergonomic and resistant to solvents.
Quick stop function – Ensures safe and controlled foam application.
Adjustable foam output – Fine-tune the flow with the trigger and adjustment screw.
Teflon-coated exterior – Easy to clean and resistant to cured foam.
Single-part extrusion rod – Strong and durable for long-term use.
Weight: 446 g
Usage Instructions:
Shake the foam can vigorously at least 20 times.
Attach the can upright to the gun.
Hold the can upside down when extruding foam.
Adjust foam output using the trigger and screw.
Clean immediately after use with Penosil Foam Cleaner 929.
Foam can be reused within 14 days if left attached to the gun.
Important Notes:
Only use with compatible PU foam products.
Do not bend, drop, or place heavy objects on the gun.
Avoid screwing the can with the valve upside down.
Clean the applicator tip after every use to prevent clogging.
Penosil Painter’s Silicone 611 is a one-component, paintable, elastic finishing sealant designed for sealing and filling movable joints prior to painting. It provides a smooth, bright white finish and remains permanently flexible, making it ideal for applications where traditional acrylic sealants may crack.
The sealant can be painted over shortly after application, allowing faster completion of finishing works. Its water-based, low-odour formula is user- and environmentally friendly, and tools can be easily cleaned with water.
Painter’s Silicone 611 offers excellent adhesion to most common building materials and is suitable for both interior and exterior use. The cured seal maintains elasticity and appearance over time, even when exposed to temperature changes and structural movement.
Key Features:
Paintable elastic sealant for movable joints
Permanently flexible with movement capability up to ±12.5%
Smooth, bright white surface for high-quality finishing
Low odour, water-based formulation
Good UV and weather resistance
Easy application and smoothing
Tools clean easily with water
Typical Applications:
Joints between walls and ceilings
Corners and angles
Connections between window or door frames and walls
PENOSIL MS UltraFast AllWeather 788 is an extra-fast curing MS-polymer based hybrid adhesive for construction and industrial applications. Exceptional performance guaranteed even during the most demanding working conditions (usage temperature -15°C to +40°C).
Values:
Extremely fast curing, even in cold temperatures
Designed for extreme working conditions (-15°C to +40°C)
Very strong and durable bond with many materials
Long-lasting elasticity
Totally weatherproof and extreme temperature resistant
Silicone, isocyanates and solvent free
Can be painted
Non-corrosive to metals
No odour
Suitable for interior and exterior applications
Application Areas:
Construction and industrial applications where extremely fast-curing and elastic bond is needed.
Ideal for cold-weather installation works such as bonding outdoor materials on wintertime.
Mounting fixtures and equipment in refrigerated or cold storage units.
Assembling components on the manufacturing line that require strong and fast bond.
Bonding components during the production of appliances, HVAC systems, furniture, etc.
Various interior and exterior bonding and sealing works.
