Reducing tee connector (brass) 22x18x22 mm

• Compressed air filters are used for highly efficient removal of solid particles, water, oil, aerosols, hydrocarbons, odors and vapors from compressed air systems.
• To achieve the required quality of compressed air, filters that gradually remove all types of solid and liquid contaminants from the compressed air must be installed in the compressed air line
• Your advantages through better quality compressed air:
• Safe filtration of both liquids such as water and aerosols as well as particles, dust and gases
• Better working and production conditions
• Optimum protection of connected tools and machines
• Improved product quality through reduction of rejects
• Protection of the compressed air system against contamination
• Increase of productivity by reduction of instant maintenance

• for the separation of oil vapors, odors and flavorings via adsorption and in the second stage of solid particles
• Residual content of oil vapor up to 0.005 mg / m³ at 20 ° C and 1 bar
• Operating temperature 1.5 to 45 ° C
• Compressed air quality according to ISO 8573-1
• For compressed air of the highest quality, eg, for breathing air, in analytical technology or semi-luxury bottling
• Pure compressed air in connection with upstream ultrafine filter
• with filter element and manual drain

Advantages of DRYPOINT eco control

• Integrated DRYPOINT M Plus solution: filtration and dryer in a compact form, as well as condensate drain integrated
• Filtration on the spot in the treatment chain where the highest efficiency is achieved
• Easy maintenance / replacement of filter element as with a filter
• Application-specific degree of dryness can be selected
• Consistent compressed air quality under fluctuating operating conditions
• Energy saving through minimization of purging air consumption for actual amount of useful air and degree of drying
• Power evaluation via LED, forwarding via current output 4 … 20 mA possible
• User-friendly: Easy to use, test functions, error messages
• Concept based on the fail-safe principle, error message can be picked up via potential-free contact

Functionality of the DRYPOINT® M eco control

Based on the measurement result from the sensor, the control software decides in defined cycles whether and how long the full amount of purge air has to be provided to achieve and stabilize the required degree of dryness. This process is implemented by means of a targeted clocking of a solenoid valve. In each cycle, the duration of the two process sections described below varies in order to keep the degree of drying within the specified tolerance range.

• Two-stage compression 2-cylinder high-performance cast iron unit with very low speed
• Particularly quiet and low-vibration running is achieved
• Longer service life due to less wear
• Powered by Honda GX390 engine with low oil and fuel consumption and low noise and vibration levels
• High air delivery rate of 900 liters per minute
• With generator for three-phase (7 kVA) and single-phase (3.5 kVA) power supply
• With electric and manual start

• The two-stage compression 2-cylinder high-performance cast iron unit achieves a very low speed, resulting in particularly quiet and low-vibration operation. This ensures a longer service life due to less wear
• Belt drive by Honda GX390 engine with low oil and fuel consumption as well as low noise and vibration levels
• Energy efficiency: The Honda GX390 engine is known for its low oil and fuel consumption, which reduces operating costs
• With a high air delivery rate of 900 liters per minute, this compressor is ideal for demanding applications
• Versatility: Equipped with a generator for both three-phase (7 kVA) and single-phase (3.5 kVA) power supply
• Easy maintenance: thanks to the integrated filter and lubrication equipment, the compressor remains clean and efficient
• Simple operation thanks to electric and manual start
• Compressed air tank equipped with safety valve, tank pressure gauge and condensate drain cock
• Sturdy metal belt guard
• Socket design: CEE socket 230V / 16A and CEE socket 400V / 16 A

• Ideal in combination with prefabricated solutions
• Permanently sealed without pressing
• Installation even in confined spaces
• Detachable fittings can be reused
• Cost savings through quick assembly

• Permanently sealed without pressing
• Cost savings through quick and easy assembly
• Ideal in combination with prefabricated solutions
• Compatible with other standards-compliant pipes
• No confusion of contours possible
• Installation even in confined spaces
• Extraction forces far beyond the requirements of the standard
• Pipe components can be dismantled and reused
• Numerous national and international approvals
• O-rings included

• Hot-dip galvanised inside and outside with fifteen-year warranty against rusting through
• Built according to EC Directive 87/404/EEC or DGRL 97/23/EC -AD 2000, module: H / H 1