Hae

Oma valikko

Seuraava tuote

Screw compressor A-PLUS 22-08 VS K

SKU: 52-2093542

Valmistajan osanumero: 2093542

GTIN: 4036351247029

EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
High cooling effect and lower noise level due to thermostatically controlled radial fan
Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirements via automatic message
Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
Screw compressor with wear-resistant Poly V ribbed belt drive and slide clamping system
Easy maintenance due to easily accessible elements
Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
Small external dimensions, thus easy transport and installation

Energy savings through frequency-controlled compressors

Reducing energy consumption and protecting our precious energy resources has become a global challenge given its impact on the environment. The A-PLUS range, with outputs of 22, 37, 55 and 75 kW, is also available in a speed control version that combines high performance with energy saving solutions. By using a variable speed compressor in a typical installation, you save a significant amount of energy.

A frequency converter dynamically adjusts the voltage, frequency and current values of the motor. The air output is constantly set to 50 to 100 percent of the full load of the compressor. This gives the following measurable positive effects:

Accurate coverage of the air requirement by continuous control of the engine speed and compressed air generation
Minimization of unnecessary energy losses by continuous adjustment of the compressed air generation to the actual air requirement
Energy consumption proportional to the supplied compressed air
Constant and precise pressure control, adjustable to any value between 6 and 10 bar (13 bar on request)

Manufacturer
Aircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at

Vanha hinta: 24618,46€

Hinta: 22207,38€

Kpl:

i h

Saatavuus: Varastossa

Laagri

Tilattavissa. Arvioitu toimitusaika 7 päivää.

Mustamäe

Tilattavissa. Arvioitu toimitusaika 7 päivää.

Kuukausierä suunnilleen

Kausi

Ennakkomaksu

Kuukausittain

Tekniset tiedot
Ota yhteyttä

Package unit

Paino

440

Tuotteen tiedot

Nettopaino

440

Bruttopaino

440

Nimesi *

Sähköpostiosoitteesi *

Tiedustelu *

Samanlaisia tuotteita

Piston compressor AIRBOY SILENCE 241 OF E

52-2000245

Key Features:

Compact and portable design
Very quiet operation – noise level approx. 62 dB(A)
Oil-free piston compressor – no oil changes required, no oil in condensate
Maximum pressure: 10 bar
Tank capacity: 8 liters
Motor power: 1.3 kW
Voltage: 230 V / 50 Hz
Suction capacity: 240 l/min
Effective air output: 115 l/min
Number of cylinders: 2
Compression stages: 1
Speed: 2850 rpm

Additional Features:

One-hand quick coupling for compressed air withdrawal
Stepless pressure adjustment via pressure reducer
Two pressure gauges (tank and working pressure)
Motor protection switch
Vibration-damping suction feet
Rubberized handle for secure transport
Powder-coated air tank

Dimensions & Weight:

Size: approx. 490 × 420 × 390 mm
Weight: approx. 19.5 kg

201,62€ 233,00€

Varastossa 3

Kompressori 6L, 230V, 1,1kW, tuotto 90l/min AIRBOY 186 OF E

52-2001230

Technical Specifications:

Model: AIRBOY 186 OF E
Type: Oil-free portable piston compressor
Tank Capacity: 6 liters
Voltage: 230 V
Motor Power: 1.1 kW
Max Pressure: 8 bar
Working Pressure: 6 bar
Intake Capacity: 180 l/min
Free Air Delivery (FAD): 90 l/min
Cylinders / Stages: 1 / 1
Speed: 3400 rpm
Lubrication System: WDS (oil-free)
Weight: approx. 9.2 kg
Dimensions (L × W × H): 315 × 355 × 370 mm
Noise Level: 97 dB(A)

Key Features:

Oil-free operation – no oil changes, clean air output
Compact and lightweight – easy to carry and store
Fully automatic start/stop function
Motor protection switch – prevents overheating
Pressure regulator – adjustable output pressure
Dual pressure gauges – for tank and working pressure
Quick-release coupling – for fast tool connection
Shock-absorbing feet – stable and quiet operation
Powder-coated tank – corrosion-resistant

Ideal For:

Home and hobby use
Inflating tires, sports equipment, air mattresses
Light-duty pneumatic tools

142,20€ 158,00€

Varastossa 3

Kompressori siirrettävä 20L, 230V, 2,2kW, 215l/min 2-sylinterinen, Compact-Air 361/20 E

52-2005361

Technical Specifications:

Model: COMPACT-AIR 361/20 E
Type: Mobile piston compressor
Tank Capacity: 20 liters
Voltage: 230 V / 50 Hz
Motor Power: 2.2 kW
Max Pressure: 10 bar
Suction Capacity (Intake): 356 l/min
Free Air Delivery (FAD): 215 l/min
Cylinders / Stages: 2 / 1 (V-cylinder, single-stage compression)
Speed: 2850 rpm
Lubrication System: HOS (oil-lubricated)
Weight: approx. 37 kg
Dimensions (L × W × H): 470 × 490 × 720 mm
Noise Level: 97 dB(A)

Key Features:

Compact and mobile design – ideal for construction sites and assembly work
High-quality electric motor – with thermal protection against overheating
Fully automatic start/stop operation
Infinitely adjustable pressure regulator – from 0 to 10 bar
Two quick-release couplings – for easy tool connection
Dual pressure gauges – for tank and working pressure
Aluminum compressed air pipes
Strong protective frame – shields all components
Rubberized carrying handle – for safe transport

451,80€ 502,00€

Varastossa 3

Kompressori 24l, 1,1kW/1,5HP, tuotto 215 l/min, HLO 215-25, öljyvapaa

52-36741-K1

Technical Specifications:

Motor power: 1.5 HP / 1.1 kW
Voltage: 230 V / 50 Hz / single-phase
Max pressure: 8 bar
Working pressure: 6 bar
Intake capacity: 215 l/min
Free air delivery: 120 l/min (7.2 m³/h)
Tank capacity: 24 liters
Pump speed: 2850 rpm
Noise level:

0 m: 97 dB(A)

4 m: 77 dB(A)

7 m: 72 dB(A)

Dimensions: 580 × 255 × 580 mm
Weight: 21 kg
Cylinders: 1
Stages: 1
Drive type: Direct drive (1:1)
Start type: Direct start
Oil-free: Yes
Main air connection: ¼" universal fitting
Duty cycle: 20% run / 80% rest

Features:

Oil-free operation – clean air output, no oil changes required
Compact and portable – easy to move with handle and wheels
Protective housing – enhances safety during use
Ideal for: inflating tires, mattresses, balls, pools, and cleaning leaves or water systems
Low maintenance – no need to monitor oil levels

115,00€ 151,00€

Varastossa 5+

Kompressori 50L, 2,2kW/3HP 2 sylinterinen HL425-50 + tarvikkeet

52-36888

Technical Specifications:

Model: HL425-50
Tank Capacity: 50 liters
Motor Power: 3 HP / 2.2 kW
Voltage: 230 V / 50 Hz / 1-phase
Max Pressure: 8 bar
Cut-in Pressure: 6 bar
Intake Capacity: 392 l/min
Free Air Delivery (FAD): 260 l/min
Pump Speed: 2850 rpm
Drive Type: Direct drive (1:1)
Cylinders: 2
Lubrication: Oil-lubricated
Noise Level:

0 m: 97 dB(A)

4 m: 77 dB(A)

7 m: 72 dB(A)

Dimensions (L × W × H): 750 × 330 × 660 mm
Weight: 43.5 kg
Air Connections: 2 universal quick couplings (¼")
Start Type: Direct
Duty Cycle: 30% compression / 70% rest
Wheels: Yes – mobile design
Accessories Included: Pneumatic tools matched to the compressor

Key Features:

Two-cylinder piston compressor – efficient and reliable for semi-professional use
Oil-lubricated pump – longer lifespan with proper maintenance
Compact and mobile – ideal for garages, workshops, and DIY tasks
Energy-efficient – runs on standard 230 V household power
Complete set – includes accessories suited for the compressor’s performance

219,00€ 290,00€

Varastossa 1

Samanlaiset tuoteryhmät

Paineilmatyökalut

Varaosat

Äskettäin katsotut tuotteet

Screw compressor A-PLUS 38-13 K

52-2093846

All main components of the compressor are manufactured by machining using numerically controlled machine tools, including suction regulator, separator block and minimum pressure valve
The cooling takes place via a temperature-controlled centrifugal fan and an oversized combination cooler. This ensures optimal cooling even under the most extreme conditions.
Generous access panels allow easy maintenance and immediate control of the internal components, reducing the time required for inspection and maintenance to one medium.
The main operating parameters are monitored by the electronic microprocessor control NRG: In addition to the various functions, a weekly timer for switching on and off is available to meet the requirements of each customer. In addition, up to 4 machines can be controlled simultaneously according to the master / slave principle.
Standard with star-delta connection

Energy savings through frequency-controlled compressors
Reducing energy consumption and protecting our precious energy resources has become a global challenge given its impact on the environment. The A-PLUS 22, 37, 55 and 75 kW range is also available in a speed control version that combines high performance with energy saving solutions. By using a variable speed compressor in a typical installation, you save a significant amount of energy.
Manufacturer
Aircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at

27512,02€ 30499,04€

On request in weeks