SDSplus masonry drill 12x160mm, S4 type

Velcro sandpaper P180, triangular with 12 holes, 5 pcs, for sander 59G264, 54-034 by NEO TOOLS with gradation P180. The pack contains five triangular pieces of sheets, designed for the 59G264 GRAPHITE plaster grinder. The accessory has 11 practical holes with a diameter of 12 mm, with a distance from the centre of the hole to the edge of 24 mm and a distance between the centres of the holes of 45 mm. NEO TOOLS Velcro sanding paper is recommended for plasterboard. It has a side length of 285 mm, a height of 245 mm and an internal angle of 60°. The sandpaper will be suitable for both professional use and various DIY tasks.

The SDS Plus 8 x 160 mm, quatro 54-105 reinforced concrete drill bit by NEO TOOLS is an accessory characterised by a diameter of 8 mm and an overall length of 160 mm and a working length of 90 mm. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks), it is ideal for working in reinforced concrete. The cross-cut bit is made of fine-grain carbide. This robust tool from NEO TOOLS is recommended for intensive use by professionals.

The 3-in-1 warning work jacket, insulated, yellow and navy blue, size M, 81-714-M by NEO TOOLS is a high-visibility jacket that meets the requirements of class 3 according to the EN ISO 20471 standard. It is characterised by a material composition of 100% polyester and Oxford 300D fabric. With detachable sleeves and an internal fleece insulator, this jacket can be used on both cold and warmer days. Equipped with multifunctional chest pockets, a zipped sleeve pocket and side pockets, it offers storage for small items. Drawstrings in the sleeves and at the bottom of the jacket, as well as a hood tucked into the stand-up collar, provide additional protection against the wind and the cold. The jacket has a name tag. Workwear from the NEO TOOLS brand will prove useful in many situations, on and off the job.

Nails for stapler 58G081, GA18 Type 90, length 20 mm, 400 pcs. 56-760 by NEO TOOLS are 400-pack nails, 20mm long and 1.25mm wide. They are designed for precision assembly and finishing work and are compatible with the 58G081 stapler. They feature type 90 GA18.

GRAPHITE's 14 TPI, HCS, 65 mm 57T505 plunge-cutting blade for the multifunction machine is a tool made of tough carbon steel (HCS), with a working width of 65 mm and 14 TPI. The blade is designed for plunge cutting in wood. The use of three-sided sharpened teeth and their spacing of 1.75 mm - enables fast and precise cutting. The maximum cutting depth is 40 mm and the blade thickness is 0.7 mm. The Multifunction Saw Blade from the GRAPHITE brand is the choice for efficient wood cutting in assembly and renovation work.