Blade for reciprocating saw GRAPHITE about the length 240 mm and 5 with teeth an inch long designed for coarse and quick cuts in wood (felling and pruning trees) with saber saws. The maximum thickness of the materials is 190 mm. Enables fast and precise straight and curved / plunge cuts.
Masonry drill VERTO (ref. no. 60H666) with SDS+ shank 22.0 mm diameter, tip with fine grit sintered carbide allows to efficiently drill holes in concrete. Double S4 flute ensures proper drillings extraction and protects the drill against overheating. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
Metal drills GRAPHITE (ref. no. 57H196) with diameters from 4.0 mm to 10 mm made of 9341 high speed steel alloy. Additional coating of titanium nitride allows to reduce machining resistance and keep high quality of drilled holes, especially when drilling with automated drills. 135° point angle and chisel edge correction allow for easy drilling without punching. Tools perfect for drilling in steel, cast iron, non-ferrous metals (copper, aluminium, brass).
GRAPHITE metal drill with 4.2 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
Velcro sand paper GRAPHITE (ref. no. 55H723) with dimensions 115 x 230 mm and granulation 100, with holes. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. Velcro fastening allows quick replacement of used abrasive disc. Designed for mounting on orbital grinders. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
GRAPHITE metal drill with 12.0 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
Metal drills GRAPHITE (ref. no. 57H034-10) with diameters 5.2 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.
The GRAPHITE impact bits (ref. 56H540) type PH1/2/3, PZ1/2/3, with a total length of 25 mm, are heavy duty bits designed for heavier work with high torques using screwdrivers or impact drivers. Made of high-quality S2 steel, which is characterized by increased flexibility and resistance to mechanical damage. The torsion zone, rotating under the influence of high torque, reduces the transmission of force, which makes the bit more resistant to breakage, and its service life is extended several times. The working tip of the tip guarantees a perfect fit. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
A set of HSS-CNC twist dril GRAPHITE (Ref. 55H086) with diameters ranging from 4.0 to 10.0 mm, made of high-alloy high speed steel using CNC machining. Ideally suited for drilling precise holes in all types of metals.
Masonry drill GRAPHITE with SDS+ holder, crossed tip with fine grit sintered carbide allows to efficiently drill holes in concrete. Double S4 flute ensures proper drillings extraction and protects the drill against overheating.
GRAPHITE abrasive papers are used for rough sanding of wood and metal surfaces. Hook and loop fastener allows for quick replacement of worn out paper. Holes allow for nearly dust-free operation with tools equipped with dust extraction system.
Angle sanding sponge GRAPHITE (ref. no. 55H925) with dimensions 98 x 25 x 68 mm and granulation 80. Designed for finishing work. Perfectly suitable for manual grinding and smoothing of putty, finish coats, gypsum, paints, plastics, wood, metal and varnish coatings. Suitable for wet and dry processing. Abrasive grain coating on four sides of the sponge. The sponge shape fits well in your hand. The abrasive sponge has one oblique side and one curved side, which make hard-to-reach places easily accessible for processing. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Velcro sand paper GRAPHITE (ref. no. 55H720) with dimensions 115 x 230 mm and granulation 40, with holes. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. Velcro fastening allows quick replacement of used abrasive disc. Designed for mounting on orbital grinders. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Masonry drill VERTO (ref no. 60H176) with 8.0 mm diameter. Tipped with fine grit sintered carbide and enhanced resistance to high temperature. Grinded drill flute reduces drilling forces. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
Velcro sand paper GRAPHITE (ref. no. 55H724) with dimensions 115 x 230 mm and granulation 120, with holes. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. Velcro fastening allows quick replacement of used abrasive disc. Designed for mounting on orbital grinders. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Metal drills GRAPHITE (ref. no. 57H030-10) with diameters 4.8 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.
Velcro sand paper GRAPHITE (ref. no. 55H721) with dimensions 115 x 230 mm and granulation 60, with holes. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. Velcro fastening allows quick replacement of used abrasive disc. Designed for mounting on orbital grinders. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
NEO set of 1/4" driver bits includes 7 pieces. Thanks to use of S2 alloy steel, the hardness of driver bits is 60 HRC, which substantially extends life time and quality of work. The set has 6 standard bits with 25 mm length. Driver bits have magnetic blades. The set also includes 60 mm holder. TÜV Rheinland certificate guarantees high quality and reliability of the product. NEO brand meets expectations of professionals.
