Sanding sponge 70 x 25 x 100 mm, P150, 58T164 by GRAPHITE is a sponge designed for hand sanding and finishing. Used for smoothing putty, drywall, plaster, paint, plastics, wood, metal and varnish coatings. The abrasive grain made of electro-corundum is located on four sides of the sponge. The soft structure allows it to conform to the shape of the surface to be sanded, and for hard-to-reach areas, the sponge can be easily cut into smaller pieces. Thanks to its thickness and flexibility, the GRAPHITE sanding sponge distributes the pressure of the hand evenly, avoiding localised depressions and scratches.
GRAPHITE's 56T606 35mm fork cutter is designed for drilling holes in wood, furniture boards and plastics. The carbide-tipped (TCT) blades provide durability and a precise finish. The design of the tool allows for flat-bottomed holes and the self-centring tip allows for accurate positioning in the material. The GRAPHITE cutter has central and external cutting blades, an overall length of 85mm and a cylindrical shank.
Water sandpaper 230 x 280 mm, P500, 58T222 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible latex C backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
Velcro sanding discs 125 mm, P100, 5 pieces, with 8 holes 58T291 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 125 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
Saw blade, widia, 150 x 30 mm, 30 teeth 57T207 by GRAPHITE, with an external diameter of 150 mm and a mounting hole diameter of 30 mm. It has 30 teeth, the cut width is 2 mm and the tooth angle is 15°. The maximum speed is 11,500 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.
Velcro sanding discs 150 mm, P180, 5 pieces, without holes 58T177 by GRAPHITE are discs without holes for metal, wood and plastic. Gradation P180 - fine grade - allows appropriate sanding according to the needs and surface preparation stage. The backing made of type C paper is suitable for machine use. The electro-corundum abrasive coating ensures high efficiency, and the Velcro fastening allows GRAPHITE discs to be changed quickly and conveniently.
GRAPHITE's 105 mm 56T720 bi-metal hole saw with a height of 44 mm allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 80 rpm, Inox steel - 40 rpm, aluminium - 120 rpm, wood - 100 rpm, cast iron - 55 rpm, brass - 110 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
Sanding cloth 230 x 280 mm, P80, 58T345 by GRAPHITE is an accessory with full grain electro-corundum and flexible JF backing. It has 100% coverage and contains a synthetic resin bond. It will work well with plasterboard, wood, metal and plastics. GRAPHITE brand sanding canvas is recommended for pre-smoothing coatings.
Sanding cloth 230 x 280 mm, P36, 58T341 by GRAPHITE is an accessory with full grain electro-corundum and flexible JF backing. It has 100% coverage and contains a synthetic resin bond. It will work well with plasterboard, wood, metal and plastics. GRAPHITE brand sanding canvas is recommended for coarse coating removal.
GRAPHITE's 4 x 75mm 56T201 concrete drill bit with cylindrical shank, has a diameter of 4mm, an overall length of 75mm and a working length of 45mm. Recommended for concrete, brick and stone applications.
Sanding grid white 115 x 280 mm, P220 58T146 by GRAPHITE recommended for handheld applications with wood, metal, plastic, glass and plasterboard. It is characterised by its double-sided grit and white grain of fine electro-corundum. It is a waterproof, easy-to-clean GRAPHITE mesh that flexibly adapts to the surface. Thanks to its double-sided grit, it is economical and efficient to work with. It will prove its worth in many tasks.
The 10 x 120 mm ground concrete drill bit 56T305 by GRAPHITE is a ground concrete, brick and stone drill bit with a standard cylindrical chuck. It features a diameter of 10 mm, an overall length of 120 mm and a working length of 72 mm. The GRAPHITE drill bit will prove useful in domestic applications.
GRAPHITE's 7/10 mm 54T402 confirmat drill bit characterised by an overall length of 100 mm and a working part length of 70 mm. Equipped with a cylindrical handle. Designed for drilling holes for confiirmate screws. GRAPHITE brand drills are useful in the toolbox of every do-it-yourselfer.
Water sandpaper 230 x 280 mm, P240, 58T217 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible C latex backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
The SDS Plus double helix 10 x 600 mm 56T121 concrete drill bit by GRAPHITE is a concrete, brick and stone drill bit with a double helix and SDS Plus chuck. It features a diameter of 10mm and an overall length of 600mm and a working length of 470mm. It will prove useful for many tasks around the home and in the workshop.
The 8 x 120 mm ground concrete drill bit 56T303 by GRAPHITE is a ground concrete, brick and stone drill bit with a standard cylindrical chuck. It features a diameter of 8 mm, an overall length of 120 mm and a working length of 72 mm. The GRAPHITE drill bit will prove useful in domestic applications.
Yellow sanding paper in roll 2.5 m x 115 mm, P120, 58T424 by GRAPHITE is a product designed for sanding surfaces such as metal, wood, plastic and plasterboard. Made on a D-paper base, it is characterised by high durability and resistance to tearing. Thanks to its open grain, in which the surface is coated with 50-60% electro-corundum abrasive grain, the paper offers greater resistance to sanding dust clogging. It can be used for both hand and machine sanding - including with orbital sanders and gypsum sanding trowels.
GRAPHITE's SDS Plus Double Spiral Concrete Drill 8 x 260 mm 56T111 is a concrete, brick and stone drill bit with a double spiral and SDS Plus chuck. It features an 8mm diameter and a total length of 260mm and a working length of 185mm. It will prove useful for many tasks around the home and in the workshop.
Water sandpaper 230 x 280 mm, P2500, 58T231 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible C latex backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
Jigsaw blade, 12 TPI, HSS, U-shaped handle, 2 pieces 57T526 by GRAPHITE is a jigsaw blade with a tooth density of 12 TPI, made of HSS and equipped with a U-shaped handle. The set includes 2 pieces. It has an overall length of 76 mm, a working length of 50 mm, a width of 8 mm, a thickness of 1 mm and a tooth spacing of 2 mm. It is designed for work with medium-thick sheet metal (2.5-6 mm). The GRAPHITE brand blade allows for basic cutting.
