Spline bit M8 x 30 mm length. Bit is made of high quality S2 alloy steel. Manufacturer`s 25 years warranty confirms high quality of the tool. NEO brand meets expectations of professionals.
TOPEX screwdriver bits are made of high quality chromium vanadium steel that guarantees long lifetime of the tools. Ergonomic handle coated with anti slip material ensures high comfort at work. Handle features ratchet gear mechanism that allows to save time when working. Additionally the set includes pen holder with bits, which is a convenient solution. TOPEX brand is oriented towards DIY enthusiasts.
The SDS Plus concrete drill bit, 7 x 260 mm, S4, quatro 57-411 by NEO TOOLS is a drill bit with a cross tip made of fine-grain carbide. The S4 double helix ensures that it has proper excavation and reduces the risk of overheating. The drill bit has a working length of 200 mm and an overall length of 260 mm. The accessory has an SDS Plus shank. Its intended use is concrete, brick, masonry and stone. NEO TOOLS drill bit is recommended for use with hammer drills and impact hammers.
Komplekt sisaldab: 25mm pikkused otsakud PH1/PH2(x2)/PH3 PZ1/PZ2(x2)/PZ3 T15(x2)/T20(x2)/T25(x2)/T30(x2)/T40, 50mm pikkused otsakud PH1/PH2/PH3PZ1/PZ2(x2)/PZ3T15(x2)/T20(x2)/T25(x2)/T30(x2)/T40 Kahepoolne PZ2 65 mm kruvikeeraja otsak, 8/10/13 mm 65 mm pikkused 1/4"" kuuskantpadrunid, Otsakuhoidik magnetiga
HSS-Co 8.0 mm metal drill bits, 5 pcs. 57-046-5 by NEO TOOLS are deep ground drills according to DIN 338 and made of M35 steel with 5% cobalt addition. They use an apex angle of 135° and type C shear correction. They have a cylindrical handle. The length of the working part is 75 mm and their overall length is 117 mm. The maximum speeds are: INOX 450-500 rpm, general metals 900-1000 rpm. The purpose of this set by NEO TOOLS is to drill in demanding materials such as stainless, acid-resistant and heat-resistant steel.
Grinding disc GRAPHITE (ref. no. 55H756) with granulation K80, diameter 40 mm, width 20 mm, for sanding wooden, metal and plastic surfaces. Made of durable, flexible leaves made of abrasive cloth, thanks to which it perfectly adapts to the surface. Product with X-cloth backing designed for mechanical grinding. Close coating (100% of the surface is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Flap wheel 50 × 30 × 6 mm, P40, 58T393 by GRAPHITE has dimensions of 50 × 30 × 6 mm and gradation P40. It is designed for universal use, especially for machining hard-to-reach areas. The grain is made of electro-corundum and the bond is synthetic resin. The maximum speed recommended for this GRAPHITE brand grinding wheel is 13,000 rpm and the working speed is 35 m/s.
The 125 x 22.2 mm, P80, 58T122 flap wheel by GRAPHITE has dimensions of 125 × 22.2 mm and a gradation of P80. The maximum speed is 12 250 rpm and the working speed is 80 m/s. The flaps are arranged in a fan-shaped pattern and made of electro-corundum grit. It is designed for grinding steel and wooden surfaces with angle grinders. The backing is X-grain cloth for machine sanding. The coating is solid and covers 100% of the surface with abrasive grain. The GRAPHITE grinding wheel is recommended for many applications.
GRAPHITE flap disc is used for efficient polishing of metal and wood surfaces with use of angle grinders. Radial arrangement of abrasive cloth flaps allows to obtain efficiency that is many times greater than in other abrasive tools.
Grinding disc GRAPHITE (ref. no. 55H990) with diameter 125 mm and granulation K100, used for efficient polishing of metal and wood surfaces with use of angle grinders. Radial arrangement of abrasive cloth flaps allows to obtain efficiency that is many times greater than in other abrasive tools. Product with C-cloth backing designed for mechanical grinding. Close coating (100% of the paper surface is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Flap wheel 80 x 30 x 6 mm, P80, 58T384 by GRAPHITE has dimensions of 80 × 30 × 6 mm and gradation P80. It is designed for universal use, especially for machining hard-to-reach areas. The grain is made of electro-corundum and the bond is synthetic resin. The maximum speed recommended for this GRAPHITE brand grinding wheel is 8000 rpm and the working speed is 35 m/s.
The flap wheel 30 × 15 × 6 mm, P80, 58T402 by GRAPHITE has dimensions of 30 × 15 × 6 mm and gradation P80. It is designed for universal use, especially for machining hard-to-reach areas. The grain is made of electro-corundum and the bond is synthetic resin. The maximum speed recommended for this GRAPHITE brand grinding wheel is 22,000 rpm and the working speed is 35 m/s.
Grinding disc GRAPHITE (ref. no. 55H762) with granulation K80, diameter 80 mm, width 30 mm, for sanding wooden, metal and plastic surfaces. Made of durable, flexible leaves made of abrasive cloth, thanks to which it perfectly adapts to the surface. Product with X-cloth backing designed for mechanical grinding. Close coating (100% of the paper is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Flap wheel 80 x 30 x 6 mm, P60, 58T383 by GRAPHITE has dimensions of 80 × 30 × 6 mm and gradation P60. It is designed for universal use, especially for machining hard-to-reach areas. The grain is made of electro-corundum and the bond is synthetic resin. The maximum speed recommended for this GRAPHITE brand grinding wheel is 8000 rpm and the working speed is 35 m/s.
The flap wheel 30 x 15 x 6 mm, P100, 58T403 by GRAPHITE has dimensions of 30 × 15 × 6 mm and gradation P100. It is designed for universal use, especially for machining hard-to-reach areas. The grain is made of electro-corundum and the bond is synthetic resin. The maximum speed recommended for this GRAPHITE brand grinding wheel is 22,000 rpm and the working speed is 35 m/s.
Zirconia flap wheel 115 × 22.2 mm, P60, 58T106 by GRAPHITE has dimensions of 115 × 22.2 mm and gradation P60. The maximum speed is 13 300 rpm and the working speed is 80 m/s. The leaves are arranged in a fan pattern and made of zirconia grit. It is designed for grinding ordinary, stainless, stainless and acid-resistant steels. The backing is X-grain cloth for machine grinding. The coating is solid and covers 100% of the surface with abrasive grain. The GRAPHITE grinding wheel is recommended for many applications.
Grinding disc GRAPHITE (ref. no. 55H984) with diameter 115 mm and granulation K100, used for efficient polishing of metal and wood surfaces with use of angle grinders. Radial arrangement of abrasive cloth flaps allows to obtain efficiency that is many times greater than in other abrasive tools. Product with C-cloth backing designed for mechanical grinding. Close coating (100% of the paper surface is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
The 30 x 25 x 6 mm, P60, 58T411 flap wheel by GRAPHITE is a 30 mm diameter, 25 mm high, 6 mm shank and P60 gradation accessory for use with drills and straight grinders. The GRAPHITE grinding wheel has a maximum speed of 22,000 rpm and a linear speed of 35 m/s. The tool enables grinding of external and internal surfaces and hard-to-reach areas. The GRAPHITE brand grinding wheel adapts to the shape of the workpiece.
