For longitudinal and cross cuts in solid wood and panel materials, chip thickness limitation reduces cutting break-outs due to loose knots and other inclusions Manufacturer Stürmer Maschinen GmbH Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany info@stuermer-maschinen.de
Drill stop set 6-10 mm, 3 pieces 58T550 by GRAPHITE includes 3 drill stops designed for 6, 8 and 10 mm drill diameters and an Allen key to adjust them. The stops are made of tool steel and take the form of metal rings that are fitted to the drill bit. By using a depth stop, it is possible to quickly set the correct drilling depth and to drill multiple holes at the same depth, ensuring high repeatability. This solution makes it easy to control the drilling depth and allows the settings to be changed quickly using the supplied Allen key.
Drill stop set 3-16 mm, 8 pieces 58T551 by GRAPHITE includes 8 drill stops for drill diameters 3, 4, 5, 6, 8, 10, 12 and 16 mm and an Allen key to adjust them. The stops are made of tool steel and take the form of metal rings that are fitted to the drill bit. By using the stop, it is possible to quickly set the correct drilling depth and to drill multiple holes at the same depth, ensuring high repeatability. This solution makes it easy to control the drilling depth and allows the settings to be changed quickly using the supplied Allen key.
The combined tooth with an extremely positive rake angle in combination with the group set will cut thin-walled sections with little vibration. Tooth tips made of HSS M 51 additionally improve the band service life, in particular for problematic materials.
The specialist for:
Popular steel grades up to approx. 1 700 N/mm² tensile strength
General information about bi-metal saw bands: The starting material of these bi-metal saw bands is a two-component material (bi-metal) obtained by electron welding. The band made of this material has a high-hardening, wear-resistant high-performance high-speed steel in the teeth, while the band body made of alloyed tempered steel is spring-hard and fatigue-proof. Manufacturer Optimum Maschinen Germany GmbH Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany info@optimum-maschinen.de
The combination tooth with a 0° rake angle in combination with the group set sawing also saws thin-walled profiles with particularly low vibration. Short chipping material is machined without any problems. The M42-SPRINT bi-metal saw blade increases the tool life and creates a good cutting quality.
The specialist for:
Common steel grades up to approx. 1400 N/mm² tensile strength
Specially developed tooth form for processing a particularly wide range of materials and universal use for solid material and profiles. Economical for reduced stock-keeping.
The combination tooth with a 0° rake angle in combination with the group set sawing also saws thin-walled profiles with particularly low vibration. Short chipping material is machined without any problems. The M42-SPRINT bi-metal saw blade increases the tool life and creates a good cutting quality.
The specialist for:
Common steel grades up to approx. 1400 N/mm² tensile strength
The combined tooth with an extremely positive rake angle in combination with the group set will cut thin-walled sections with little vibration. Tooth tips made of HSS M 51 additionally improve the band service life, in particular for problematic materials.
The specialist for:
Popular steel grades up to approx. 1 700 N/mm² tensile strength
The combination tooth with a 0° rake angle in combination with the group set sawing also saws thin-walled profiles with particularly low vibration. Short chipping material is machined without any problems. The M42-SPRINT bi-metal saw blade increases the tool life and creates a good cutting quality.
The specialist for:
Common steel grades up to approx. 1400 N/mm² tensile strength
The combination tooth with a 0° rake angle in combination with the group set sawing also saws thin-walled profiles with particularly low vibration. Short chipping material is machined without any problems. The M42-SPRINT bi-metal saw blade increases the tool life and creates a good cutting quality.
The specialist for:
Common steel grades up to approx. 1400 N/mm² tensile strength
The combination tooth with a 0° rake angle in combination with the group set sawing also saws thin-walled profiles with particularly low vibration. Short chipping material is machined without any problems. The M42-SPRINT bi-metal saw blade increases the tool life and creates a good cutting quality.
The specialist for:
Common steel grades up to approx. 1400 N/mm² tensile strength
