Äskettäin katsotut tuotteet
02-56T728
GRAPHITE's 10mm 56T728 diamond hole saw has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.
02-56T521
Torx bits T25 x 25 mm, 3 pieces 56T521 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The bits from the GRAPHITE brand are suitable for many tasks.
02-56T200
GRAPHITE's 3 x 60 mm 56T200 concrete drill bit with cylindrical shank, has a diameter of 3 mm, an overall length of 60 mm and a working length of 36 mm. Recommended for concrete, brick and stone applications.
02-56T702
GRAPHITE's 19mm bi-metal hole saw 56T702 is 51mm high and allows drilling to a depth of 38mm. It is made from HSS high speed steel and is fitted with a 1/2'' x 20 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T753 adapter with pilot drill bit for bi-metal hole saws in the 14-30 mm range. Maximum speeds for this tool, vary depending on the material: steel - 460 rpm, Inox steel - 230 rpm, aluminium - 690 rpm, wood - 680 rpm, cast iron - 300 rpm, brass - 600 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
02-56T519
Torx bits T30 x 25 mm, 3 pieces 56T519 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
