UUTUUDET

The combination tooth with a 0° rake angle in combination with the group set sawing also saws thin-walled profiles with particularly low vibration. Short chipping material is machined without any problems. The M42-SPRINT bi-metal saw blade increases the tool life and creates a good cutting quality.

The specialist for:

• Common steel grades up to approx. 1400 N/mm² tensile strength
• non-ferrous profiles
• single and bundle cuts
• Profiles with low or medium wall thickness
• sheet metal panels on vertical panel sawing lines

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

The combination tooth with a 0° rake angle in combination with the group set sawing also saws thin-walled profiles with particularly low vibration. Short chipping material is machined without any problems. The M42-SPRINT bi-metal saw blade increases the tool life and creates a good cutting quality.

The specialist for:

• Common steel grades up to approx. 1400 N/mm² tensile strength
• non-ferrous profiles
• single and bundle cuts
• Profiles with low or medium wall thickness
• sheet metal panels on vertical panel sawing lines

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

The combined tooth with an extremely positive rake angle in combination with the group set will cut thin-walled sections with little vibration. Tooth tips made of HSS M 51 additionally improve the band service life, in particular for problematic materials.

The specialist for:

• Popular steel grades up to approx. 1 700 N/mm² tensile strength
• Corrosion and acid-resistant steels
• Nickel based alloys
• Titanium and special bronzes
• Solid material medium dimensions
• Thick-walled sections

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

The combination tooth with a 0° rake angle in combination with the group set sawing also saws thin-walled profiles with particularly low vibration. Short chipping material is machined without any problems. The M42-SPRINT bi-metal saw blade increases the tool life and creates a good cutting quality.

The specialist for:

• Common steel grades up to approx. 1400 N/mm² tensile strength
• non-ferrous profiles
• single and bundle cuts
• Profiles with low or medium wall thickness
• sheet metal panels on vertical panel sawing lines

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Specially developed tooth form for processing a particularly wide range of materials and universal use for solid material and profiles. Economical for reduced stock-keeping.

The specialist for:

• steel beams, profiles and tubes
• workpiece mix

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Body laser-cut, application-specific fine grain carbide and extremely tight manufacturing tolerances
• Highest plan and concentricity precision, noise reduced design
• Large carbide tipped for many resandings

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Substructure prepared for the KME1 coolant system
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Pipe / profiles (wall thickness)
  
  • from 3 mm: aluminum / bronze / copper / brass
• Solid material (cross section)
  • 20-40 mm: steels up to 1,800 N / m2 aluminum / bronze / copper
  • 40-60 mm: steels up to 1,200 N / m2 stainless steels

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Height-adjustable material stands MSR as a manual aid for supporting and moving workpieces on metal saws. H version variably adjustable up to 1,050 mm
• Easy and efficient material transport for feeding and removing workpieces
• Universally applicable for eg metal band saws, circular saws, etc.
• Roller support infinitely height adjustable
• Safe workpiece support thanks to solid and heavy-duty steel rollers
• Extendable endlessly
• Attachment possibility of the length measuring systems LMS
• Stable design of the frame - with strong special profile
• Support rollers made of steel ball bearings on both sides

Room amenities
Accessories PVC rolls

• Additionally mountable
• Made of non-slip PVC
• To avoid scratches
• Simply hang the rollers in the existing holder
• In practical wall holder

Table extension MSR 1

• Additionally mountable
• Can be grown in both directions

connecting plate

• Additionally mountable
• with attachments right and left
• slots

As this is a universal track, it may be necessary to carry out adaptation work on the connecting plate depending on the machine type.
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

The combination tooth with a 0° rake angle in combination with the group set sawing also saws thin-walled profiles with particularly low vibration. Short chipping material is machined without any problems. The M42-SPRINT bi-metal saw blade increases the tool life and creates a good cutting quality.

The specialist for:

• Common steel grades up to approx. 1400 N/mm² tensile strength
• non-ferrous profiles
• single and bundle cuts
• Profiles with low or medium wall thickness
• sheet metal panels on vertical panel sawing lines

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Easy material transport when feeding and removing workpieces
• Universally applicable for e.g. Metal band saws, circular saws, etc.
• Roller support infinitely height adjustable
• Safe workpiece support thanks to solid and heavy-duty steel rollers
• Extendable endlessly
• Attachment possibility of the length measuring systems LMS
• Stable design of the frame - with strong special profile
• Support rollers made of steel ball bearings on both sides

As this is a universal track, it may be necessary to carry out adaptation work on the connecting plate depending on the machine type.
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Saw bands suitable for processing:

• Structural steel
• Deep drawing steel
• cutting steel
• tempering steel
• hardened steel
• Thick-walled pipe
• Solid material round steel
• Cast iron
• pipe
• carrier
• bunch

General information about bi-metal saw bands:
The starting material of these bi-metal saw bands is a two-component material (bi-metal) obtained by electron welding. The band made of this material has a high-hardening, wear-resistant high-performance high-speed steel in the teeth, while the band body made of alloyed tempered steel is spring-hard and fatigue-proof.
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

LPG free by hand pumping mechanism. Content 500 ml. The ideal spray for cutting work in all types of steel + and non-ferrous metals. Biodegradable according to CEC-L-33-T82
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

The combined tooth with an extremely positive rake angle in combination with the group set will cut thin-walled sections with little vibration. Tooth tips made of HSS M 51 additionally improve the band service life, in particular for problematic materials.

The specialist for:

• Popular steel grades up to approx. 1 700 N/mm² tensile strength
• Corrosion and acid-resistant steels
• Nickel based alloys
• Titanium and special bronzes
• Solid material medium dimensions
• Thick-walled sections

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Easy material transport when feeding and removing workpieces
• Universally applicable for e.g. Metal band saws, circular saws, etc.
• Roller support infinitely height adjustable
• Safe workpiece support thanks to solid and heavy-duty steel rollers
• Extendable endlessly
• Attachment possibility of the length measuring systems LMS
• Stable design of the frame - with strong special profile
• Support rollers made of steel ball bearings on both sides

As this is a universal track, it may be necessary to carry out adaptation work on the connecting plate depending on the machine type.
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de