UUTUUDET

PEAMISED EELISED • 1/4” HEX vars – sobib mugavalt akutrellidele ja löökkruvikeerajatele • 4 spiraali ja 4 lõikeserva – kiirem materjali eemaldus ning väiksem koormus lõikeservadele • Keermestatud tsentreeriv ots – puur tõmbab end ise materjali sisse, vajab vähem survet • Puhas ja täpne puurimine – vähendab pindude ja rebendite tekkimist • Pikem kasutusiga – ühtlane lõikamine aitab vähendada kulumist • Efektiivne laastude eemaldus – spetsiaalne spiraal viib materjali kiiresti august välja

NEO transport belt (ref. 84-140) is a set of 2 belts with lengths of 4.5 m and 0.5 m and a width of 50 mm. It is used for securing loads and smaller objects against movement. It has a ratchet on both sides for tightening the belt and steel hooks for fastening. Nominal strength is up to 5 tonnes. The belt is CE certified. It was made according to the EN-12195-2 standard.

NEO's special socks made of high-quality cotton with the addition of polyester, elastane and acrylic, ensure comfort and hygiene at work. Reinforcements have been applied on toes and heels to protect against quick abrasion. In discreet black colour with orange-grey inserts.

Läbipaistev kaaneosa võimaldab sisu hõlpsasti näha ning kahepoolne ehitus võimaldab hoiustada erinevaid otsikuid kui ka teisi väiksemaid osasid. Kohvri sisemised vaheseinad on eemaldatavad ning ruumi saab vastavalt sisule ümber korraldada.

UH023G on 40Vmax XGT® harjavaba mootoriga hekilõikur, mis sobib ideaalselt kujunduslõikuseks ja erinevateks aiatöödeks. Kompaktne ja kerge konstruktsioon tagab suurepärase kontrolli ning mugava käsitsemise. Käepideme paigutus viib haarde raskuskeskmele lähemale, vähendades randme koormust ja parandades manööverdusvõimet pikemaajalisel kasutamisel. Harjavaba mootor tagab professionaalseks tööks vajaliku lõikekiiruse ja jõudluse, säilitades samal ajal väga hea tasakaalu ja kasutusmugavuse.

Alumiiniumist jahutusventilaator parandab õhuvoolu, tagades sujuvama lõikamise ning vähendades kinnikiilumise ohtu paksemate okste lõikamisel. Vastupidavuse tagavad metallist hammasrattad ja laagrid ning tugevdatud väntmehhanismi kontaktala, mis vähendab tera lahtituleku ohtu. Kolmnurksed, diagonaalselt lihvitud terad hoiavad oksi kindlalt paigal ja jätavad puhta lõikepinna. Lõikepuru suunaja lõikejäägid lihtsa külgsuunalise liigutusega.

Hekilõikur on varustatud elektrilise piduri, taaskäivituskaitse ja täiustatud aku kaitsesüsteemiga. XPT-tehnoloogiaga kõrge vee- ja tolmukindlus ning hõlpsasti ligipääsetav määrdeava parandavad vastupidavust ja lihtsustavad hooldust, muutes selle hekilõikuri usaldusväärseks tööriistaks täpsete lõigete teostamisel ka raskemates tingimustes.

Õhemad lõikehambad ja ketas ise vähendavad lõiketakistust ning parandavad töö efektiivsust, võimaldades kiiremat lõikamist väiksema koormusega tööriistale. Vastupidav cermet-tehnoloogiaga hammaste konstruktsioon tagab suurepärase kulumiskindluse ning võimaldab lõigata kuni 32 mm paksust terast sujuvalt ja efektiivselt. Uuendatud hambavahede disain parandab metallilaastude eemaldamist, vähendades kuumenemist ja aidates säilitada stabiilset lõikekiirust ka intensiivsel kasutamisel. Lisaks toetab lamedate hammaste esipinna erilihv veelgi paremat laastueemaldust, mille tulemuseks on puhtam ja täpsem lõige.

The 56T800 drill stand diameter 43 mm by GRAPHITE is a practical holder for drills with a mounting diameter of 43 mm. The product has an adjustable drilling depth and a guide for drilling into pipes, which makes it easier to drill precise holes in parts with a rounded shape.

NEO TOOLS' O1 SR Neo Air work half-boots, size 44, 82-782-44 is a model with an upper made of polyester fabric, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe is made in the O1 SR category, indicating resistance to slipping on ceramic ground covered with sodium lauryl sulphate solution (SLS) and the absence of a protective sole. In addition, there is a Neo Air cushion in the back of the sole for greater comfort when walking. The NEO TOOLS brand model is CE certified.

NEO TOOLS' O1 SR Neo Air professional half boots, size 45, 82-782-45 is a model with an upper made of polyester fabric, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe is made in the O1 SR category, indicating resistance to slipping on ceramic ground covered with sodium lauryl sulphate solution (SLS) and the absence of a protective sole. In addition, there is a Neo Air cushion in the back of the sole for greater comfort when walking. The NEO TOOLS brand model is CE certified.

NEO TOOLS' S1 SR Neo Air half work boots, steel toecap, size 41, 82-176-41 is a safety shoe by NEO TOOLS, equipped with a steel toecap providing protection against impacts with an energy equal to 200J. The model has a polyester fabric upper, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe has been manufactured in the S1 SR category, which means slip resistance on ceramic ground coated with sodium lauryl sulphate solution (SLS). An additional comfort feature is the Neo Air cushion located in the rear part of the sole, which provides greater comfort when walking. The half-boots are CE certified, confirming compliance with safety requirements.

NEO TOOLS' O1 SR Neo Air work half-boots, size 39, 82-782-39 is a model with an upper made of polyester fabric, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe is made in the O1 SR category, indicating resistance to slipping on ceramic ground covered with sodium lauryl sulphate solution (SLS) and the absence of a protective sole. In addition, there is a Neo Air cushion in the back of the sole for greater comfort when walking. The NEO TOOLS brand model is CE certified.

NEO TOOLS' S1 SR Neo Air half work boots, steel toecap, size 43, 82-176-43 is a safety shoe by NEO TOOLS, equipped with a steel toecap providing protection against impacts with an energy equal to 200J. The model has a polyester fabric upper, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe has been manufactured in the S1 SR category, which means slip resistance on ceramic ground coated with sodium lauryl sulphate solution (SLS). An additional comfort feature is the Neo Air cushion located in the rear part of the sole, which provides greater comfort when walking. The half-boots are CE certified, confirming compliance with safety requirements.

NEO TOOLS' O1 SR Neo Air work half-boots, size 47, 82-782-47 is a model with an upper made of polyester fabric, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe is made in the O1 SR category, indicating resistance to slipping on ceramic ground covered with sodium lauryl sulphate solution (SLS) and the absence of a protective sole. In addition, there is a Neo Air cushion in the back of the sole for greater comfort when walking. The NEO TOOLS brand model is CE certified.

NEO TOOLS' O1 SR Neo Air work half-boots, size 46, 82-782-46 is a model with an upper made of polyester fabric, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe is made in the O1 SR category, indicating resistance to slipping on ceramic ground covered with sodium lauryl sulphate solution (SLS) and the absence of a protective sole. In addition, there is a Neo Air cushion in the back of the sole for greater comfort when walking. The NEO TOOLS brand model is CE certified.

NEO TOOLS' S1 SR Neo Air half work boots, steel toecap, size 42, 82-176-42 is a safety shoe by NEO TOOLS, equipped with a steel toecap providing protection against impacts with an energy equal to 200J. The model has a polyester fabric upper, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe has been manufactured in the S1 SR category, which means slip resistance on ceramic ground coated with sodium lauryl sulphate solution (SLS). An additional comfort feature is the Neo Air cushion located in the rear part of the sole, which provides greater comfort when walking. The half-boots are CE certified, confirming compliance with safety requirements.

NEO TOOLS' O1 SR Neo Air work half-shoes, size 40, 82-782-40 is a model with an upper made of polyester fabric, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe is made in the O1 SR category, indicating resistance to slipping on ceramic ground covered with sodium lauryl sulphate solution (SLS) and the absence of a protective sole. In addition, there is a Neo Air cushion in the back of the sole for greater comfort when walking. The NEO TOOLS brand model is CE certified.

Steel Brushes, Brush, Cup Brush, Disc Brush, Set of 3 Pieces 55-066 by NEO TOOLS is a set of 3 pieces comprising a 5mm diameter brush, a 15mm diameter cup brush and a 22mm diameter disc brush - each with a 3.2mm diameter shank. They are made from corrugated steel wire and are designed for polishing. They can be suitable for metal, wood, ceramics, glass and plastics.

The drill stand 43 mm diameter, 60 mm stroke 56T801 by GRAPHITE is a practical drill holder for drills with a mounting diameter of 43 mm. The product has a maximum drilling depth adjustment of up to 60 mm, which facilitates precise serial drilling to a specific point in the material surface.

NEO TOOLS' S1 SR Neo Air half work boots, steel toecap, size 40, 82-176-40 is a safety shoe by NEO TOOLS, equipped with a steel toecap providing protection against impacts with an energy equal to 200J. The model has a polyester fabric upper, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe has been manufactured in the S1 SR category, which means slip resistance on ceramic ground coated with sodium lauryl sulphate solution (SLS). An additional comfort feature is the Neo Air cushion located in the rear part of the sole, which provides greater comfort when walking. The half-boots are CE certified, confirming compliance with safety requirements.

NEO TOOLS' O1 SR Neo Air professional half boots, size 41, 82-782-41 is a model with an upper made of polyester fabric, a knitted mesh lining, a PU/PU sole and a HI-POLY foam insole. The shoe is made in the O1 SR category, indicating resistance to slipping on ceramic ground covered with sodium lauryl sulphate solution (SLS) and the absence of a protective sole. In addition, there is a Neo Air cushion in the back of the sole for greater comfort when walking. The NEO TOOLS brand model is CE certified.