Äskettäin katsotut tuotteet
02-55H322
The 80 mm widia hole saw with SDS+ adapter and pilot drill 55H322 by GRAPHITE characterised by a hole saw diameter of 80 mm, a height of 72 mm and a drilling depth of 50 mm. It is equipped with 10 widia with a width of 2.2 mm. The internal diameter is 74 mm and the fi drill parameters are 8 x 110 mm. The length of the entire set is 163 mm. The GRAPHITE brand hole saw is offered in a set with an SDS+ adapter and a pilot drill bit. It has hammer drilling capability and is also designed for drilling holes in concrete and brick. It makes it possible to prepare holes for installation boxes. The fine-grain carbide blades with increased wear resistance extend the life of the tool. The hole saw will prove useful in the professions of builders, DIY enthusiasts and electricians.
02-58G026
Cordless brushless angle grinder 18V, Li-Ion, 125x22.2 mm rotor, 10,000 rpm, M14 spindle thread, three-position side handle, weight 1.7 kg, compatible with Energy + batteries
52-360666
Technical specifications:
- Engine power: 3 HP / 2.2 kW
- Power supply: 230 V / 50 Hz / 1 phase
- Maximum pressure: 10 bar
- Suction capacity: 400 l/min
- Effective capacity: 317 l/min
- Tank capacity: 90 liters
- Noise level: 74 dB(A)
- Rotation speed: 1250 rpm
- Dimensions: 980 x 480 x 890 mm
- Weight: 64.4 kg
02-57T565
The sabre saw blade, HM 455 x 50 x 1.5 mm, 2 TPI, 57T565 is a tool with an overall length of 455 mm, a width of 50 mm and a thickness of 1.5 mm, fitted with carbide-tipped teeth (TCT). It has been designed for cutting construction materials. With a tooth spacing of 12.7 mm (2 TPI), it can effectively work with hollow bricks (up to 405 mm), porous concrete, red and lightweight bricks, and fibre cement.
