GRAPHITE's 100 mm diameter wire butt brush, twisted steel wire, M14, 57T412 is made from twisted steel wire. Equipped with an M14 thread, it is designed for use with angle grinders. The maximum speed of the tool is 8500 rpm. The product meets the requirements of EN 1083-2 and is well suited for roughing metal surfaces, aggressive cleaning, removing rust, paint or dirt.
Wood hole saws with adapter 19 - 64 mm, set of 12 pcs. 56T748 by GRAPHTE is a set of wood hole saws with adapter, which includes eight pieces with diameters from 19 to 64 mm, allowing holes up to 25 mm deep. The set also includes an Allen spanner, adapters with a 7.8 and 9.5 mm shank and a 6 mm diameter centre drill bit. GRAPHITE holesaws are suitable for working in wood, plasterboard and plastic, with a maximum speed of 2,000 rpm.
Velcro sanding discs 125 mm, P120, 5 pieces, with 8 holes 58T292 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 125 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
Water sandpaper 230 x 280 mm, P400, 58T221 by GRAPHITE is a water-based hand sanding paper. It has a full grain of electro-corundum, 100% coverage and a flexible latex C backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
Water sandpaper 230 x 280 mm, P150, 58T214 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible latex C backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
Segmented diamond cutting wheel, 230 x 22.2 mm, dry and wet 57T314 by GRAPHITE is a segmented dry and wet cutting wheel with a diameter of 230 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.4 mm wide. The maximum speed of the disc is 6 600 rpm, corresponding to 80 m/s. The GRAPHITE disc meets the requirements of EN 13236 and is designed for cutting granite, concrete, brick, stone and marble.
The GRAPHITE 57T301 solid diamond cutting wheel, 125 x 22.2 mm, wet 57T301 is a solid diamond cutting wheel with a diameter of 125 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 5 mm high and 2 mm wide. The maximum speed of the disc is 12 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting terracotta, stoneware, granite and marble.
Straight wood router bit with bearing, widia, 8 x 19 mm, shank 8 mm 56T608 by GRAPHITE is a router bit with unscrewable bearing, with a blade diameter of 8 mm and a height of 19 mm and an overall length of 65 mm. It is fitted with an 8 mm shank. The cutter is made of tungsten carbide (TCT), ensuring durability and precision. With two cutting edges, it is ideal for making straight grooves, grooves and slots. The straight profile allows for smooth edge machining. It is designed for woodworking and is therefore suitable for carpentry and furniture work.
GRAPHITE's 12 x 400 mm 56T214 concrete drill bit with cylindrical shank, has a diameter of 12 mm, an overall length of 400 mm and a working length of 240 mm. Recommended for concrete, brick and stone applications.
GRAPHITE's 32mm bi-metal hole saw 56T707 is 51mm high and allows drilling to a depth of 38mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 275 rpm, Inox steel - 140 rpm, aluminium - 410 rpm, wood - 370 rpm, cast iron - 180 rpm, brass - 360 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
Sanding papers 93 x 230 mm, P120, 5 pieces, unperforated 58T259 by GRAPHITE are P120 grade papers suitable for sanding metal, wood and plastics. A type C paper base, designed for machine sanding, is used to make a single sheet. The semi-open structure, with 100% of the abrasive grain (electrocorundum) on the surface, ensures good performance. GRAPHITE sanding papers are offered in a practical set of 5.
GRAPHITE's 10mm 56T728 diamond hole saw has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.
Sanding grid 115 x 280 mm, P120 58T154 by GRAPHITE recommended for handheld applications with wood, metal, plastic, glass and plasterboard. It features a double-sided grit and black silicon carbide grain. It is a waterproof, easy-to-clean GRAPHITE mesh that flexibly adapts to the surface. Thanks to the double-sided grit, it is economical and efficient to work with. It will prove its worth in many tasks.
Velcro sanding papers, iron 102 x 152 mm, P40, 5 pieces, with 11 holes 58T300 by GRAPHITE is a set of 5 pieces of Velcro sanding papers, 102 x 152 mm. They are characterised by a cut-out in the shape of a so-called iron - with the possibility of detaching one of the parts and fitting it to a sander with a delta foot. The accessories have a paper backing and an electro-corundum coating. They are designed for machine use. With 11 holes on the surface, they allow them to be used on sanders equipped with a dust extraction system. The Velcro attachment allows for quick and easy changing of the GRAPHITE sanding sheets. They are suitable for use on wood, metal, plastic, glass and plasterboard.
The SDS Plus double helix 10 x 310 mm 56T118 concrete drill bit by GRAPHITE is a concrete, brick and stone drill bit with a double helix and SDS Plus chuck. It features a diameter of 10 mm and an overall length of 310 mm and a working length of 230 mm. It will prove useful for many tasks around the home and in the workshop.
The 75 mm, twisted wire, steel butt brush with 6 mm shank 57T414 by GRAPHITE is made of twisted steel wire. Its maximum speed is 4500 rpm. The product meets the requirements of EN 1083-2 and comes with a 6 mm shank, allowing it to work with any drill or screwdriver. The GRAPHITE wire brush is a versatile product for many tasks.
The adapter from SDS Max to SDS Plus, 18 x 220 mm 56H559 by GRAPHITE is an adapter made of tool steel and designed for impact work. The SDS-max to SDS+ adapter allows you to use accessories with an SDS-Plus shank on machines with an SDS-Max shank. For example, it enables a drill bit with an SDS+ chuck to be mounted on a rotary hammer with an SDS-max chuck. The GRAPHITE brand adapter is particularly recommended if you need to drill without having an SDS+ hammer drill with you, but have a drill with this SDS+ chuck. However, when drilling a large number of holes, the use of this adapter should be carried out with an SDS-max chuck. The adapter has an overall length of 220 mm.
The 127 x 14 x 22.2 mm 58T450 non-woven abrasive wheel by GRAPHITE is a wheel suitable for a maximum speed of 7800 rpm and a working speed of 50 m/s. Its surface is coated with grain made of electro-corundum. The product is designed for metal. GRAPHITE non-woven abrasive is used for sanding, cleaning and matting steel surfaces. Designed for use with a 125 mm angle grinder.
Endless belts 75 x 457 mm, P40, 3 pcs. 58T360 by GRAPHITE are designed for machine use and work with belt sanders. They have a backing made of paper and an electrocorundum coating. GRAPHITE belts are suitable for metal, wood, plastic and plasterboard. They will prove their worth in many tasks.
GRAPHITE's 16mm 56T731 diamond hole saw has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.
