Impact bits PZ1/2/3 x 50 mm, 3 pieces 56-542 by NEO TOOLS are impact bits PZ1, PZ2, PZ3, with a length of 50 mm. Made from S2 steel, they are suitable for impact work. They have a 1/4" HEX shank. They will work well for professional and DIY tasks. Supplied in a set of 3.
PH2 x 25mm impact bits, 20 pieces 56-531 by NEO TOOLS are PH2 impact bits, 25mm in length. Supplied in a set of 20 pieces. Made from S2 steel, they are suitable for impact work. They have a 1/4" HEX shank. They will work well in professional and DIY tasks.
HSS-Co 4.5 mm metal drill bit, 10 pcs. 57-028-10 by NEO TOOLS is a drill bit deeply ground according to DIN 338 and made of M35 steel with 5% cobalt addition. It uses an apex angle of 135° and type C shear correction. It has a cylindrical handle. The length of the working part is 47 mm and its overall length is 80 mm. The maximum speeds are: INOX 825-900 rpm, general metals 1650-1800 rpm. The purpose of this NEO TOOLS brand drill bit is to drill in demanding materials such as stainless, acid-resistant and heat-resistant steel.
Screwdriver bits PZ2 x 25 mm, 100 pieces 56-624 by NEO TOOLS are PZ2 type bits with a length of 25 mm. Mounted on a ¼" HEX thread. They are characterised by high resistance to deformation and are recommended for high frequency work. Part made from S2 steel. The bits are recommended for POZDIRIV screws and will prove useful in every professional and DIY workshop. Set of 100 pieces from NEO TOOLS.
Wire brush for petrol scythe 150 x 25.4 mm, hard, 55-100 tangled wires by NEO TOOLS is a brush disc for petrol scythes. It has dimensions of 150 x 25.4 mm outer diameter and inner bore and 0.5 mm wire diameter. It makes it possible to clean cobblestones and metal surfaces. It is characterised by a maximum speed of 6500 rpm. It is made of durable wire weave. The NEO TOOLS brand is a guarantee of durability for years.
Abrasive sponge 98 × 25 × 68 mm, P180, bevelled, 55-927 by NEO TOOLS is a 98 × 25 × 68 mm tool with gradation P180, designed for working with metal, plastics and wood. The flexible backing and slanted profile allow even sanding of flat surfaces, edges and corners. The 98 × 68 mm format provides a comfortable grip when working by hand. The P180 model from NEO TOOLS is suitable for a wide range of sanding tasks.
Wire brush for petrol scythe 200 x 25.4 mm, hard, knotted wires 55-101 by NEO TOOLS is a brush disc for petrol scythes. It has dimensions of 200 x 25.4 mm outer diameter and inner bore. It makes it possible to clean cobblestones and metal surfaces. It was made of durable wire weave, with a wire diameter of 0.5 mm. The NEO TOOLS brand is a guarantee of durability for years.
The 150 mm x M14 Velcro mounting disc, 55-826 by NEO TOOLS is a 150 mm diameter disc with Velcro mounting. Equipped with an M14 screw holder, it allows mounting in angle grinders. Designed to work with sandpaper discs, in tasks with metal and wooden surfaces. The backing plate facilitates sanding of hard-to-reach areas. The maximum speed of this NEO TOOLS accessory is 8,500 rpm.
Fibre abrasive discs 125 mm, P40, 3 pieces 55-855 by NEO TOOLS are 125 mm diameter and P40 gradation discs, with mounting hole: 22.2 mm. Supplied in a set of 3, they are designed for use with the 57-860 NEO TOOLS disc. The maximum speed parameters are 12,250 rpm and 80 m/s. Recommended for machining metal, wood and plastics.
The SDS Plus 10 x 310 mm, quatro 54-112 reinforced concrete drill bit by NEO TOOLS is an accessory characterised by a diameter of 10 mm and an overall length of 310 mm and a working length of 240 mm. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks), it is ideal for working in reinforced concrete. The cross-cut bit is made of fine-grain carbide. This robust tool from NEO TOOLS is recommended for intensive use by professionals.
Screwdriver bits PH2 x 25 mm, 20 pieces 57-955 by NEO TOOLS are PH type bits with a length of 25 mm. Mounted on a ¼" HEX thread. They feature high resistance to deformation and are recommended for high frequency work. The components are made from S2 steel. The NEO TOOLS bit is recommended for Phillips-type screws, it will prove useful in every professional and DIY workshop. The set includes 20 elements.
Flap wheel 125 x 22.2 mm, P120, zirconia 57-845 by NEO TOOLS is a 125 mm diameter, P120 gradation accessory with a 22.2 mm mounting hole, designed for grinding metal - including stainless steel and acid-resistant steel (INOX). The fan-shaped, radial flap arrangement with full grit (100% zirconia grain coverage) on an X-type cloth base ensures a high stock removal rate and stable guidance in machine work. The zirconia grain has a self-sharpening effect, thus extending the life of the tool in intensive work. The maximum speed is 12,250 rpm and the permissible linear speed is 80 m/s.
Flap wheel 115 x 22.2 mm, P80, 55-983 by NEO TOOLS is a 115 mm diameter, P80 gradation accessory with a 22.2 mm mounting hole, designed for efficient grinding of metal and wood with angle grinders. The fan-shaped, radial arrangement of the abrasive cloth leaves increases the efficiency of stock removal, while the C-type cloth base, adapted for machine sanding, provides stable pressure during use. It uses a solid coating (100% grain coverage, electro-corundum), which promotes service life and an even surface finish. The maximum speed is 13,300 rpm and the permissible linear speed is 80 m/s.
PH1 x 25mm impact bits, 20 pieces 56-530 by NEO TOOLS are PH1 impact bits, 25mm in length. Supplied in a set of 20 pieces. Made from S2 steel, they are suitable for impact work. They have a 1/4" HEX shank. They will work well in professional and DIY tasks.
Saw blade, widia, 216 x 30 mm, 60 teeth, universal 55-547 by NEO TOOLS is equipped with 60 teeth, 2.4 mm x 1.8 mm, made of TCT carbide. The FWF tooth, with its special geometry and wide comb section, guarantees increased load resistance. The NEO TOOLS brand disc in manganese steel MN65 reaches a maximum speed of up to 7,300 rpm. Three rings are included, allowing reduction to dimensions: 30 x 25.4 mm, 30 x 20 mm and 30 x 16 mm. The NEO TOOLS blade is designed for cutting steel profiles, aluminium and other non-ferrous metals (such as copper), as well as plastics, wood with small nails, OSB, plywood, branches and laminates. The use of compensating notches reduces noise levels and the slots increase tool stability and cutting accuracy. The product from the NEO TOOLS brand ensures clean and precise work.
Diamond holesaws (6, 8, 10, 12, 16 mm), 5-piece set 55-319 by NEO TOOLS is a set of five holesaws with diameters: 6, 8, 10, 12, 16 mm, which are made of robust C45 steel. They are characterised by a maximum drilling depth of 30 mm and a speed of up to 13,300 revolutions per minute. With an M14 chuck and HV hardness of 175-200, they are versatile in use. They work best with ceramics, stoneware, concrete, clinker and stone. The D46 grit size and 10 mm diamond coating height ensure clean and precise cutting even in demanding conditions. The NEO TOOLS diamond holesaw set is recommended for professionals as well as DIY enthusiasts.
TX25 x 25 mm impact bits, 2 pieces 56-514 by NEO TOOLS type TX25 with a length of 25 mm. Equipped with a ¼" HEX handle and recommended for heavy work with high torque, using screwdrivers or impact drivers. The impact bits are made from durable S2 steel. 2 pieces are offered in the set - for professionals and DIY enthusiasts.
The SDS Plus 16 x 210 mm, quatro 54-132 reinforced concrete drill bit by NEO TOOLS is an accessory characterised by a diameter of 12 mm and an overall length of 210 mm and a working length of 140 mm. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks), it is ideal for working in reinforced concrete. The cross-cut bit is made of fine-grain carbide. This robust tool from NEO TOOLS is recommended for intensive use by professionals.
NEO TOOLS diamond blade 180 x 22,2 mm, turbo wave 57-636 by NEO TOOLS of the turbo wave type with a diameter of 180 mm and a mounting hole of 22,2 mm is designed for dry and wet cutting of concrete. Equipped with a segment of 6 mm height and 2.8 mm thickness, it ensures effective surface processing. The NEO TOOLS disc meets the requirements of EN 13236 and is designed to operate at a maximum speed of 8,500 rpm and a peripheral speed of 80 m/s, making it safe for use with compatible angle grinders. The turbo wave diamond disc is distinguished by its corrugated body, which improves cooling and spoil removal during cutting. As a result, it works more stably, heats up more slowly and has a longer service life, especially when cutting concrete intensively.
Fibre abrasive discs 125 mm, P80, 3 pieces 55-857 by NEO TOOLS are 125 mm diameter and P80 gradation discs, with mounting hole: 22.2 mm. Supplied in a set of 3 pieces, they are designed for use with the 57-860 NEO TOOLS disc. The maximum speed parameters are 12,250 rpm and 80 m/s. Recommended for machining metal, wood and plastics.
