Work trousers OUTDOOR, 4 way stretch, green-grey, size S

With a height of 44 mm, GRAPHITE's 60 mm bi-metal hole saw 56T713 allows drilling to a depth of 38 mm. It is made from HSS high-speed steel and has a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 140 rpm, Inox steel - 70 rpm, aluminium - 220 rpm, wood - 180 rpm, cast iron - 95 rpm, brass - 190 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.

Cutting disc for 14-017, set of 5 pcs, 14-017-400 by NEO is a set of five discs compatible with NEO's 75 mm 14-017 pneumatic cutter. The disc is designed for precise cutting of bodywork, sheet metal parts and metal structures. Recommended for car service and industrial work.

Jigsaw blade, 6 TPI, HCS, T-handle, 2 pieces, clean cut 57T548 by GRAPHITE is a jigsaw blade with 6 TPI tooth density, made of HCS and fitted with a T-handle. The set includes 2 pieces. It has an overall length of 100 mm, a working length of 74 mm, a width of 8 mm, a thickness of 1.5 mm and a tooth spacing of 4 mm. Suitable for cutting softwood, chipboard, carpenter's plywood and fibreboard 10-45 mm thick. The GRAPHITE brand blade enables clean cutting.

Circular saw blades with HM tips GRAPHITE (ref. 55H547), outside diameter 216 mm and internal 30 mm, it has 60 teeth, allows for higher cutting speed. Circular saw blades based on the special design of the teeth and the use of special carbide. Universal circular saw blades, which doesn't need to be replaced when changing the material being cut. FWF teeth thanks to its special design and a wide part of the comb give guarantees strength. Designed for cutting various types of materials, e.g. steel and aluminum profiles and other non-ferrous metals, such as copper, plastics, wood with small nails, OSB boards, plywood, branches, laminates, etc. The use of compensation cuts reduces the noise level, and the gaps increase the stability of the blade and the accuracy of the cut. Circular saw blades ensures a clean cut.

Velcro sandpaper P80, triangular with 12 holes, 5 pcs, for sander 59G264, 54-032 by NEO TOOLS with gradation P80. The pack contains five triangular pieces of sheets, designed for the 59G264 GRAPHITE plaster sander. The accessory has 11 practical holes with a diameter of 12 mm, with a distance from the centre of the hole to the edge of 24 mm and a distance between the centres of the holes of 45 mm. NEO TOOLS Velcro sanding paper is recommended for plasterboard. It has a side length of 285 mm, a height of 245 mm and an internal angle of 60°. The sandpaper will be suitable for both professional use and various DIY tasks.