Äskettäin katsotut tuotteet
02-57T564
The sabre saw blade, HCS 152 x 19 x 1.3 mm, 6 TPI, 57T564 by GRAPHITE is a carbon steel (HCS) blade with an overall length of 152 mm, a width of 19 mm and a thickness of 1.3 mm. It has 6 teeth per inch (TPI) and a tooth spacing of 4 mm. Designed for clean curved and plunge cutting of materials such as engineered wood, plywood, plastic (6-100 mm), wood panels (<75 mm), particleboard and MDF (6-60 mm). The GRAPHITE blade design allows for comfortable cutting in workshop work.
02-56H034
Blade for reciprocating saw GRAPHITE about the length 228 mm and 6 with teeth an inch long used for cutting fiber-cement, plasterboard, concrete, fiberglass and resin reinforced composites with saber saws. The maximum thickness of the materials is 175 mm. It is used in renovation, construction and demolition works as well as in home amateur work. It enables straight cutting. The saw blade produces less dust when cutting compared to traditional methods. Enables cutting close to the edge and in hard-to-reach places.
02-56H030
Blade for reciprocating saw GRAPHITE about the length 240 mm and 2 with teeth an inch long used for cutting cellular concrete, brick, cement board, plasterboard using saber saws. The maximum thickness of the materials is 150 mm. It is used in renovation, construction and demolition works as well as in home amateur work. It enables straight cutting. The saw blade produces less dust when cutting compared to traditional methods. Enables cutting close to the edge and in hard-to-reach places.
02-58G783
GRAPHITE electric mixer with 1250W motor for mixing plaster, mortar or paint. The mixer, thanks to its robust construction and efficient heat dissipation system, is suitable for continuous operation in finishing work on medium-sized construction sites. The mixer has a possibility of regulating the rotational speed of the spindle. A properly shaped handle of the device allows comfortable and safe work for a long time. Also, for safety reasons, the mixer is equipped with a lock that prevents accidental turning on. The mixer comes with two stirrers, one mandrel and two spanners.
03-55086
HSS-CNC metal drill bits, 124°, "Pro-Tec", 4.0 - 10 mm, set of 5 pieces, 55-086 by NEO TOOLS are deeply ground according to DIN 338 and made of M2 steel. The 124° tip geometry with E-type shear correction facilitates drilling without scoring and stable tool guidance. The working part lengths are 4:43 mm, 5:52 mm, 6:57 mm, 8:75 mm, 10:87 mm and the overall lengths are 4:75 mm, 5:86 mm, 6:93 mm, 8:117 mm, 10:133 mm - recommended maximum speeds are 4:1800 rpm, 5:1500 rpm, 6:1300 rpm, 8:1000 rpm, 10:800 rpm. NEO TOOLS drills are intended for drilling in steel, cast iron, non-ferrous metals (copper, aluminium, brass) and plastics.
