Компрессоры и оборудование для сжатого воздуха AIRCRAFT в Hammerjack
Hammerjack — официальный импортёр продукции AIRCRAFT. AIRCRAFT — немецкий бренд, входящий в группу Stürmer Maschinen и специализирующийся на профессиональном оборудовании для сжатого воздуха, компрессорах и оснащении мастерских. Продукции AIRCRAFT доверяют промышленные предприятия, автосервисы и производственные компании по всей Европе.
Ассортимент AIRCRAFT включает поршневые и винтовые компрессоры, ресиверы, оборудование для подготовки сжатого воздуха, пневматический инструмент, катушки для шлангов, фильтры, осушители воздуха, регуляторы давления и другие компоненты пневматических систем.
Профессиональные решения для систем сжатого воздуха
Независимо от того, требуется ли оборудование для небольшой мастерской или крупного производства, AIRCRAFT предлагает надёжные и энергоэффективные решения для ежедневной эксплуатации.
Почему выбирают AIRCRAFT?
Официальный импортёр продукции AIRCRAFT.
Немецкие компрессоры и оборудование для сжатого воздуха.
Комплексные решения для пневматических систем.
Высокая надёжность и энергоэффективность.
Решения для промышленности, автосервисов и производства.
Немецкое качество для профессионалов
AIRCRAFT сочетает современные технологии, качественные компоненты и прочную конструкцию, предлагая профессиональные решения для работы со сжатым воздухом даже в самых сложных условиях.
For fully automatic removal of condensate or other non-aggressive fluids from the compressed air system
A capacitive sensor detects the level of the condensate. This is very accurate and requires no mechanical floats and contacts.
For installation as external arresters on reciprocating or screw compressors, aftercoolers, cyclone separators, compressed air boilers, compressed air dryers and compressed air filters
Equipped as standard with a factory alarm, LED indicator, test button and integrated sieve
On request also version with service network for setting the diagnostic parameters and an alarm output available
function Description
The condensate is collected in the collection reservoir.
If the level is high enough, the condensate is discharged from the system without loss of air
Liquid level is detected by a precise capacitive liquid level sensor
The special self-cleaning, direct-acting valve ensures reliable operation
The advantages at a glance
Integrated sieve (easy access / cleaning)
Compact design
Patented valve technology - direct acting, self-cleaning valve
Optimized for easy service (maintenance kit)
Horizontal or vertical installation possible
Robust PA housing
Including 2 meters connection cable with Schuko plug
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Compressed air filters are used for highly efficient removal of solid particles, water, oil, aerosols, hydrocarbons, odors and vapors from compressed air systems.
To achieve the required quality of compressed air, filters that gradually remove all types of solid and liquid contaminants from the compressed air must be installed in the compressed air line
Your advantages through better quality compressed air:
Safe filtration of both liquids such as water and aerosols as well as particles, dust and gases
Better working and production conditions
Optimum protection of connected tools and machines
Improved product quality through reduction of rejects
Protection of the compressed air system against contamination
Increase of productivity by reduction of instant maintenance
for separating solid contaminants up to 0.01μm
Residual oil aerosol content up to 0.01 mg / m³ at 20 ° C and 1 bar
Operating temperature 1.5 to 65 ° C
absolute compressed air quality according to ISO 8573-1
for safe separation of condensate and particles
complete with filter element and float valve
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
For continuous air demand and discontinuation operation
Electronic control for reliability and efficiency
Optimized oil separation system
Integrated design of the compressor unit
Lightweight, compact and quiet
Just as mobile and compact as piston compressors, but with the great advantage of being able to generate compressed air continuously without any cooling pauses
Can also be used in intermittent operation due to oil temperature control
Electronic temperature control for optimum oil temperature
Optimum oil viscosity due to constant temperature, therefore also suitable for intermittent operation with frequent load changes
Temperature control of the oil prevents condensation and minimizes wear
Better energy efficiency compared to a piston compressor with the same delivery capacity
Additional oil heat exchanger for cooling
K-Tronic electronic control system for reliability and efficiency
Adjustment of the cut-in and cut-out pressure
Direction of rotation control
Monitoring and control of the oil temperature
Maintenance interval display
Optimized oil separation system
Effective oil pre-separation by gravity, as the oil sump is located at the lowest point
Oil separator cartridge and oil filter cartridge easily accessible for maintenance
Integrated design of the compressor unit
Convenience and high operational reliability thanks to integration and short connections of all key components on the compressor unit
Maintenance-free direct drive
Freewheel valve for load-free operation after reaching the set pressure
Lightweight, compact and quiet
Can be used in mobile applications or where space is limited
Highly efficient and low-noise fan
Smooth-running compressor with low noise level
Area of application
Small space requirement, ideal e.g. for car washes, biogas or fire extinguishing systems, small workshops and mobile use
Also ideal as an auxiliary compressor to supplement existing systems, e.g. to cover compressed air base loads and peaks
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Large fan wheel and a cooling air baffle on the cylinder for optimum cooling of the compressor
Aftercooler with cooling fins for low vessel inlet temperature and less moisture in the compressed air
Sturdy metal belt guard
"Made in Germany": vessel pressure gauge; filter pressure regulator with pressure gauge for regulated compressed air cleaned of condensate, dirt and oil
Ten-year warranty against rust-through on powder-coated compressed air reservoir
Including high-quality composite safety coupling and high-quality CONDOR pressure switch
Two-cylinder high-performance units made of gray cast iron for a long service life.
Large fan wheel and a cooling air baffle on the cylinder for optimal cooling of the compressor
Quality electric motor with high starting torque
Electric motor equipped with motor protection switch
Aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air
Sturdy metal belt guard
Start-up capacitor and start-up relief valve ensure easy start-up on 230 volt models
Container pressure gauge "Made in Germany
Filter pressure regulator with pressure gauge "Made in Germany" for regulated compressed air cleaned of condensate, dirt and oil
Ten-year warranty against rust-through on powder-coated compressed air reservoir
Includes high quality composite safety coupling and high quality CONDOR pressure switch
Large ergonomic handle
Stable steering chassis with parking brake in combination with large, puncture-proof PU wheels
Made in Europe
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Start-stop operation via pressure switch, thereby saving energy compared to idling control
Minimal and easy maintenance
Ready for connection with all fittings
Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank
Easily transportable and deployable thanks to the safety pallet.
KK version as standard with automatic steam trap for the reliable and economical discharge of the condensate without unnecessary loss of compressed air
K and KK version with refrigeration dryer as standard with pressure dew point at 3 °C, ambient temperature 25 °C
Increased flexibility
Enabling the second compressed air vessel doubles the pressure vessel volume, thus creating a greater compressed air reserve. Helps to cover short-term peaks in compressed air requirements
For, e.g., chisel, hammer or sandblasting work, the second vessel can be isolated from the compressed air supply. This halves the vessel volume helping to build up the pressure more quickly.
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Easy installation and accessibility of all maintenance positions
Coaxial screw-type compressor with maintenance-free drive and maximum energy efficiency in all pressure ranges. Low compressor speeds and low load on the bearings of the patented direct drive ensure a very long service life.
EasyTRONIC Micro II electronic control for reliability and efficiency
Prevents motor overload, reduces wear and makes for a longer service life
Monitoring of operating hours, temperature and motor overload
Phase sequence relays control the direction of rotation of the motor, thereby avoiding possible damage during commissioning or after relocation
Optimized cooling system
Low-noise centrifugal fan guarantees optimal operating temperatures even under unfavourable conditions
Thermostatically and electronically controlled fan and generously sized heat exchanger result in a longer service life and less fluctuation in oil temperature
User-friendly in all details
Low noise, suitable for deployment in any work environment
Small footprint facilitates transport and deployment
Service-friendly thanks to optimum accessibility and easy removal and installation of all components that require maintenance
All air and oil lines are made of heat-resistant rubber
Equipped with a star delta circuitry as factory standard
Ready to connect with all fittings and safety equipment
K models with Integrated refrigeration dryer
More reliable compressed air system without costly downtimes and production delays while simultaneously ensuring product quality
Fully integrated into the housing
Ready for use without installation overhead
Equipped with control panel and time-controlled condensate drain
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Maximum tank volume in a minimum of space - the space-saving solution
Boiler batteries for up to 400 liters of additional air supply
Available as 2-pack and 4-pack batteries
All tank batteries also available in 13 bar version with 75 l tanks
By connecting additional compressed air tanks, the tank volume is increased, whereby a higher air supply can be built up.
Increased air demand can be covered at short notice
If required, individual compressed air tanks can be disconnected from the compressed air supply via ball valves, which reduces the tank volume accordingly and thus builds up the pressure more quickly.
Fifteen-year warranty against rusting through on the inside and outside of hot-dip galvanized compressed air tanks
All tank batteries can be easily moved with the lift truck
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
