Water sandpaper 230 x 280 mm, P800, 58T224 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible C latex backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
The Hex chamfer, 16 mm 54T421 by GRAPHITE is a tool for making a chamfer in a drilled hole allowing the head of a screw or bolt to be hidden (flush) in the material - wood, aluminium and plastic. The chamfer has a ¼" HEX type handle and features an overall length of 45 mm. It will be suitable for screwdrivers and drill drivers. The chamfer from the GRAPHITE brand will make a good addition to every DIY enthusiast's toolbox.
The GRAPHITE 57T300 solid diamond cutting wheel, 115 x 22.2 mm, wet 57T300 is a solid diamond cutting wheel with a diameter of 115 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 5 mm high and 2 mm wide. The maximum speed of the disc is 13 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting terracotta, stoneware, granite and marble.
GRAPHITE's 14 TPI, HCS, 45 mm 57T506 plunge-cutting blade for the multifunction machine is a tool made from tough carbon steel (HCS), with a working width of 45 mm and 14 TPI. The blade is designed for plunge cutting in wood. The use of three-sided sharpened teeth and their spacing of 1.75 mm - enables fast and precise cutting. The maximum cutting depth is 40 mm and the blade thickness is 0.7 mm. The Multifunction Saw Blade from the GRAPHITE brand is the choice for efficient wood cutting in assembly and renovation work.
Grinding discs 125 x 20/16/12.7 x 16 mm, P 60, 2 pieces 57T127 by GRAPHITE have an external diameter of 125 mm and a thickness of 16 mm. The set includes 2 pieces of accessories with a gradation of P 60. The inner diameter of the mounting hole is 12.7 mm, but reductions are included: from 20 to 16 mm and from 16 to 12.7 mm. GRAPHITE brand discs will work well for use on bench grinders. The maximum recommended speed for them is 5350 rpm. They are used for grinding metal, sharpening knives, chisels and other cutting tools, as well as machining and levelling metal surfaces.
Endless belts 75 x 533 mm, P120, 3 pcs. 58T370 by GRAPHITE are designed for machine use and work with belt sanders. They have a backing made of paper and a grain of electro-corundum. GRAPHITE belts are suitable for metal, wood, plastic and plasterboard. They will prove their worth in many tasks.
The Hex 10.0 mm concrete drill bit 56T405 by GRAPHITE is a hex shank HEX drill bit with a diameter of 10 mm, an overall length of 120 mm and a working length of 72 mm. Recommended for working with hard materials including: concrete, brick and stone. The GRAPHITE concrete drill bit will be suitable for do-it-yourselfers.
Velcro-backed sanding discs 125 mm, P220, 5 pieces, unperforated 58T187 by GRAPHITE are unperforated discs for metal, wood and plastic. Gradation P220 - very fine - allows appropriate sanding, according to the needs and the stage of surface preparation. The backing is made of type C paper and is suitable for machine use. The electro-corundum abrasive coating ensures high efficiency, and the Velcro attachment allows for quick changing of GRAPHITE discs and comfortable working.
The SDS Plus Double Spiral Concrete Drill 25 x 600 mm 56T165 by GRAPHITE is a concrete, brick and stone drill bit with a double spiral and SDS Plus chuck. It features a diameter of 25mm and an overall length of 600mm and a working length of 470mm. It will prove useful for many tasks around the home and in the workshop.
The SDS Plus double helix 14 x 260 mm 56T134 concrete drill bit by GRAPHITE is a concrete, brick and stone drill bit with a double helix and SDS Plus chuck. It features a diameter of 14 mm and an overall length of 260 mm and a working length of 182 mm. It will prove useful for many tasks around the home and in the workshop.
The 75 mm nylon wheel brush, with 6 mm shank 57T422 by GRAPHITE is made of nylon. Its maximum speed is 4,500 rpm. The product meets the requirements of EN 1083-2 and comes with a 6 mm shank, allowing it to work with any drill or screwdriver. The GRAPHITE nylon brush is a versatile product for many tasks.
Jigsaw blade, 21 TPI, HSS, T-handle, 2 pieces 57T544 by GRAPHITE is a jigsaw blade with a tooth density of 21 TPI, made of HSS and fitted with a T-handle. The set includes 2 pieces. It has an overall length of 76mm, a working length of 50mm, a width of 8mm, a thickness of 1mm and a tooth spacing of 1.2mm. Designed for working with thin sheet metal (1-3 mm). The GRAPHITE brand blade allows basic cutting.
Velcro sanding discs 125 mm, P36, 5 pieces, with 8 holes 58T287 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 125 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
HSS TiN metal drill bits, 1 - 10 mm, set of 19 pieces, 54T950 by GRAPHITE are metal drill bits characterised by diameters 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10 mm. They are made of HSS high-speed steel, coated with TiN. They have a cylindrical shank and a 118° drill point angle. They comply with DIN 338 and are suitable for every DIY enthusiast.
The SDS Plus double helix 18 x 600 mm 56T149 concrete drill bit by GRAPHITE is a concrete, brick and stone drill bit with a double helix and SDS Plus chuck. It features a diameter of 18mm and an overall length of 600mm and a working length of 470mm. It will prove useful for many tasks around the home and in the workshop.
Segmented diamond cutting wheel, 230 x 22.2 mm, dry 57T313 by GRAPHITE is a segmented dry cutting wheel with a diameter of 230 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.4 mm wide. The maximum speed of the disc is 6 600 rpm, corresponding to 80 m/s. The GRAPHITE disc meets the requirements of EN 13236 and is designed for cutting granite, concrete, brick, stone and marble.
HSS metal drills, DIN 340, 1 mm, 3 pieces 54T901 by GRAPHITE is a set of 3 metal drills, characterised by a diameter of 1 mm, an overall length of 56 mm and a working part length of 33 mm. The drills are made of HSS high speed steel. They have a cylindrical shank and a 118° drill point angle. They comply with DIN 340 and are suitable for every DIY enthusiast.
GRAPHITE's 33-83 mm tungsten tipped holesaws, set of 8 56T743 are holesaws designed for use in brick, hollow block, cellular concrete, plasterboard and lightweight building materials. They have a height of 68mm and provide a drilling depth of 57mm. They are offered with diameters of 33, 53, 67, 73, 83 mm. The cutting edge of each hole saw is coated with tungsten carbide and has a maximum speed of 1,200 rpm. The tools are designed for use with the 56T744 tungsten carbide hole saw blade and 56T745 pilot drill (available as a set). A practical tungsten carbide file is also included for easy manual refinement of drilled surfaces. The holesaws can be used for any installation work, such as the installation of power sockets, distribution boxes or pipes. They can also be used for cable conduit pipes, ventilation pipes or installation fans in the kitchen or bathroom.
GRAPHITE's 100mm diameter, crimped steel wire butt brush, M14, 57T400 is made from crimped steel wire. Equipped with an M14 thread, it is designed for use with angle grinders. The maximum speed of the tool is 8500 rpm. The product complies with the EN 1083-2 standard and is well suited for working on metal surfaces, cleaning, removing rust, paint or dirt.
With a height of 51 mm, GRAPHITE's 35 mm bi-metal hole saw 56T708 allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 250 rpm, Inox steel - 125 rpm, aluminium - 375 rpm, wood - 310 rpm, cast iron - 165 rpm, brass - 330 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
