The Wood Drill, Extended 20 x 400 mm 54T563 by GRAPHITE is a drill bit designed for working with wood and plywood and features a cylindrical chuck. It is characterised by a diameter of 20 mm and a length of 400 mm. Suitable for tasks with a maximum speed of 800 rpm. It will work well for many DIY tasks.
GRAPHITE's 67mm 56T741 tungsten tipped hole saw is designed for use in brick, hollow block, cellular concrete, plasterboard and lightweight building materials. It has a height of 68mm and provides a drilling depth of 57mm. The cutting edge of the hole saw is coated with a tungsten carbide coating and has a maximum speed of 1,200 rpm. The tool is designed for use with the 56T744 tungsten carbide hole saw blade and 56T745 pilot drill. It can be used for any installation work, such as fitting power sockets, distribution boxes or pipes. It can also be used for cable conduit pipes, ventilation pipes or installation fans in the kitchen or bathroom.
HSS metal drill bits, 4 - 10 mm, set of 5 pieces, 54T910 by GRAPHITE are metal drill bits characterised by diameters of 4, 5, 6, 8, 10 mm. They are made of HSS high speed steel. They have a cylindrical chuck and a 118° drill sharpening angle. They are characterised by compliance with DIN 338 and are suitable for every DIY enthusiast.
Hole saws with adapter, 19-76 mm, set of 15 pieces 56T724 by GRAPHITE contains fifteen pieces. The set includes holesaws with diameters: 19 mm, 22 mm, 25 mm, 29 mm, 32 mm, 35 mm, 38 mm, 44 mm, 51 mm, 57 mm, 64 mm, 76 mm. Included - 2 adapters with a 6 mm pilot drill bit and an allen key for wider use. The height of each hole saw is 28 mm and the drilling depth is 25 mm. Maximum speed during operation is 1100 rpm. The GRAPHITE branded set is designed for drilling holes in wood, plastic and plasterboard using a drill or drill/driver.
GRAPHITE's Wood Drill, Extended 10 x 250 mm 54T567 is a drill bit designed for working with wood and plywood and features a cylindrical chuck. It features a diameter of 10 mm and a length of 250 mm. Suitable for tasks with a maximum speed of 1500 rpm. It will work well for many DIY tasks.
Segmented diamond cutting wheel, 180 x 25.4 mm, dry 57T312 by GRAPHITE is a segmented dry cutting wheel with a diameter of 180 mm and a mounting hole of 25.4 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.4 mm wide. The maximum speed of the disc is 8 600 rpm, corresponding to 80 m/s. The GRAPHITE disc meets the requirements of EN 13236 and is designed for cutting granite, concrete, brick, stone and marble.
The 6mm 56T726 diamond hole saw by GRAPHITE has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.
GRAPHITE's 35mm 56T735 diamond hole saw has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.
Velcro sanding discs 150 mm, P36, 5 pieces, unperforated 58T170 by GRAPHITE are unperforated discs for metal, wood and plastic. Gradation P36 - the sharpest - allows appropriate sanding, according to the needs and the stage of surface preparation. The backing is made of type C paper and is suitable for machine use. The electro-corundum abrasive coating ensures high efficiency, and the Velcro fastening allows GRAPHITE discs to be changed quickly and conveniently.
Yellow sanding paper in roll 2.5 m x 115 mm, P60, 58T421 by GRAPHITE is a product designed for sanding surfaces such as metal, wood, plastic and plasterboard. Made on a D-paper base, it is characterised by high durability and resistance to tearing. Thanks to its open grain, in which the surface is coated with 50-60% electro-corundum abrasive grain, the paper offers greater resistance to sanding dust clogging. It can be used for both manual and machine sanding - including with orbital sanders and gypsum sanding trowels.
Sanding cloth 230 x 280 mm, P100, 58T346 by GRAPHITE is an accessory with full grain electro-corundum and flexible JF backing. It has 100% coverage and contains a synthetic resin bond. It will work well with plasterboard, wood, metal and plastics. GRAPHITE brand sanding canvas is recommended for pre-smoothing coatings.
GRAPHITE's 25mm diamond hole saw 56T733 has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.
Velcro sanding discs 150 mm, P60, 5 pieces, with 8 holes 58T282 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 150 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
Saw blade, widia, 180 x 30 mm, 60 teeth 57T216 by GRAPHITE, with an external diameter of 180 mm and a mounting hole diameter of 30 mm. It has 60 teeth, the cut width is 2 mm and the tooth angle is 15°. The maximum speed is 10,000 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.
The 4 x 75 mm ground 56T300 concrete drill bit by GRAPHITE is a ground drill bit for concrete, brick and stone, fitted with a standard cylindrical chuck. It features a diameter of 4 mm, an overall length of 75 mm and a working length of 45 mm. The GRAPHITE drill bit will prove useful in domestic applications.
The SDS Plus double helix 6 x 310 mm 56T107 concrete drill bit by GRAPHITE is a concrete, brick and stone drill bit with a double helix and SDS Plus chuck. It features a diameter of 6 mm and an overall length of 310 mm and a working length of 230 mm. It will prove useful for many tasks around the home and in the workshop.
The SDS Plus double helix 12 x 400 mm 56T128 concrete drill bit by GRAPHITE is a concrete, brick and stone drill bit with a double helix and SDS Plus chuck. It features a diameter of 12 mm and an overall length of 400 mm and a working length of 300 mm. It will prove useful for many tasks around the home and in the workshop.
Water sandpaper 230 x 280 mm, P600, 58T223 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible latex C backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
Iron sanding papers, Velcro 98 x 140 mm, P100, 5 pieces, with 5 holes 58T318 by GRAPHITE are papers available in a set of 5 pieces with 5 holes, designed for metal, wood and plastic. The sheets use a type C paper base, suitable for machine sanding. They have a semi-open mesh with 100% abrasive grain (electrocorundum) on the surface, ensuring efficient working and reducing clogging. The Velcro attachment allows easy and quick attachment to the tool.
The Hex 8.0 mm concrete drill bit 56T404 by GRAPHITE is a hex shank HEX drill bit with a diameter of 8 mm, an overall length of 120 mm and a working length of 72 mm. Recommended for working with hard materials including: concrete, brick and stone. The GRAPHITE concrete drill bit will be suitable for do-it-yourselfers.
