Waterproof sanding paper 230 × 280 mm, P2000, 55-910 by NEO TOOLS is a waterproof paper, 230 × 280 mm and gradation P2000, which is designed for wet sanding. The sheet allows finishing dulling and removal of minor irregularities from the surface. Its applications include: metal, wood, plastics and glass. Sanding with water reduces clogging of the grain and promotes an even machining effect. Sanding paper by NEO TOOLS is a proven solution for many tasks.
The 125 x 22.2 mm, P60 flap wheel, 55-988 by NEO TOOLS is a 125 mm diameter, P60 gradation accessory with a 22.2 mm mounting hole, designed for efficient grinding of metal and wood with angle grinders. The fan-shaped, radial arrangement of the abrasive cloth leaves increases the efficiency of stock removal, while the C-type cloth base, adapted for machine sanding, provides stable pressure during use. It uses a solid coating (100% grain coverage, electro-corundum), which promotes service life and an even surface finish. The maximum speed is 12,250 rpm and the permissible linear speed is 80 m/s.
HSS-Co 5.2 mm metal drill bit, 10 pcs. 57-034-10 by NEO TOOLS is a drill bit deeply ground according to DIN 338 and made of M35 steel with 5% cobalt addition. It uses an apex angle of 135° and type C shear correction. It has a cylindrical handle. The length of the working part is 52 mm and its overall length is 86 mm. The maximum speeds are: INOX 700-750 rpm, general metals 1400-1500 rpm. The purpose of this drill bit by NEO TOOLS is drilling in demanding materials such as stainless, acid-resistant and heat-resistant steel.
HSS-Co 6.5 mm metal drill bit, 10 pcs. 57-040-10 by NEO TOOLS is a drill bit deeply ground according to DIN 338 and made of M35 steel with 5% cobalt addition. It uses an apex angle of 135° and type C shear correction. It has a cylindrical handle. The length of the working part is 63 mm and its overall length is 101 mm. The maximum speeds are: INOX 575-625 rpm, general metals 1150-1250 rpm. The purpose of this NEO TOOLS brand drill bit is to drill in demanding materials such as stainless, acid-resistant and heat-resistant steel.
HSS-Co 10.0 mm metal drill bits, 5 pcs. 57-054-5 by NEO TOOLS are deep ground drills according to DIN 338 and made of M35 steel with 5% cobalt addition. They use a tip angle of 135° and type C shear correction. They have a cylindrical handle. The length of the working part is 87 mm and their overall length is 133 mm. The maximum speeds are: INOX 375-400 rpm, general metals 750-800 rpm. The purpose of this set by NEO TOOLS is to drill in demanding materials such as stainless, acid-resistant and heat-resistant steel.
Velcro-mounted delta sanding paper 93 x 93 mm P40, 5 pieces, with holes 55-763 by NEO TOOLS is a Velcro-mounted sanding paper that is designed for working with metal, wood and plastic materials. The sheets are characterised by holes with a diameter of 8 mm, facilitating work with dust extraction. These accessories use an electro-corundum grain and semi-open mesh, which reduces clogging when roughing. The backing is E-type paper, providing the correct stiffness and stable pressure on the surface. The set contains 5 delta sanding papers from NEO TOOLS.
HSS-Co 4.0 mm metal drill bit, 10 pcs. 57-024-10 by NEO TOOLS is a drill bit deeply ground according to DIN 338 and made of M35 steel with 5% cobalt addition. It uses an apex angle of 135° and type C shear correction. It has a cylindrical handle. The length of the working part is 43 mm and its overall length is 75 mm. The maximum speeds are: INOX 925-1000 rpm, general metals 1850-2000 rpm. The purpose of this drill bit by NEO TOOLS is to drill in demanding materials such as stainless, acid-resistant and heat-resistant steel.
M14 soil auger for 58G084, 80 x 600 mm 56-780 by NEO TOOLS is an M14 threaded accessory with a diameter of 80 mm and an overall length of 600 mm (working length 440 mm). The robust drill bit is designed for use with the Energy+ 58G084 GRAPHITE cordless mixer. The auger is used for drilling holes in the ground - especially in hard and difficult ground with obstacles such as stones or roots. Indispensable when working in the garden to drill holes for planting trees, as well as installing fences, guards and plant supports. The working part is made of high quality 65 Mn spring steel and the steel construction with 4 mm thick blades, single helix and double plate ensures that the tool is very strong and penetrates the soil effectively.
Sabre saw blades, HCS, set of 3 58-047 by NEO TOOLS for sabre saws is a set including three lengths and serrations, selected for the most common wood and panel work. TPI 6, 152 x 19 x 1.3 mm (4 mm pitch) - for construction timber, plywood, 6-100 mm plastics, <75 mm panels, 6-60 mm chipboard and MDF; allows clean cutting as well as curved and plunge cuts. TPI 6-10, 203 x 19 x 1.3 mm (2.5-4 mm pitch) - for construction wood, plywood, plastics 6-150 mm, panels <175 mm, particle board and MDF 6-60 mm; provides clean cutting over a wider range of thicknesses. TPI 5, 240 x 19 x 1.5 mm (5 mm pitch) - for nailless wood 15-190 mm, fresh wood diameter <190 mm and firewood with diameters of 15-190 mm; works well for straight, fast and coarse cuts. Thanks to its diverse parameters, the NEO TOOLS set covers the typical needs for assembly and garden tasks.
Accessories for mini sander, sanding belts, flap wheels, set of 24 pieces 55-081 by NEO TOOLS is a set of 24 pieces for working with metal, wood, ceramics, glass and plastics. It includes 9 aluminium oxide sanding belts with a diameter of 6.3 mm and gradation P120 and 9 belts with a diameter of 12 mm and gradation P60, as well as 2 sanding drums for mounting them and a 3.2 mm mandrel. The NEO TOOLS set is completed with flap wheels: 2 pieces of 16 mm diameter with a 3.2 mm shank and 1 piece of 32 mm diameter with a 3.2 mm shank. The accessories are designed to operate at a maximum speed of 22,000 rpm.
Steel Brushes, Brush, Cup Brush, Disc Brush, Set of 3 Pieces 55-066 by NEO TOOLS is a set of 3 pieces comprising a 5mm diameter brush, a 15mm diameter cup brush and a 22mm diameter disc brush - each with a 3.2mm diameter shank. They are made from corrugated steel wire and are designed for polishing. They can be suitable for metal, wood, ceramics, glass and plastics.
Õhemad lõikehambad ja ketas ise vähendavad lõiketakistust ning parandavad töö efektiivsust, võimaldades kiiremat lõikamist väiksema koormusega tööriistale. Vastupidav cermet-tehnoloogiaga hammaste konstruktsioon tagab suurepärase kulumiskindluse ning võimaldab lõigata kuni 32 mm paksust terast sujuvalt ja efektiivselt. Uuendatud hambavahede disain parandab metallilaastude eemaldamist, vähendades kuumenemist ja aidates säilitada stabiilset lõikekiirust ka intensiivsel kasutamisel. Lisaks toetab lamedate hammaste esipinna erilihv veelgi paremat laastueemaldust, mille tulemuseks on puhtam ja täpsem lõige.
The OPTIMUM countersink set is a high-quality 6-piece set designed for precise countersinking and clean finishing of drilled holes. It is suitable for metalworking and general workshop applications.
Key features:
Manufactured according to DIN 335C standard
Includes 6 sizes: 6 / 8 / 10 / 11.5 / 15 / 19 mm
High-quality countersinks ensure clean surfaces and remove burrs without scratching
Compatible with common cordless screwdrivers, drills, and drill presses
Suitable for a wide range of materials and applications
Supplied in a practical and durable OPTIMUM plastic case
Application:
Ideal for countersinking drilled holes, creating seats for screw heads, and deburring edges in metalworking and workshop environments.
