The 99-128 road warning flare by NEO TOOLS is a light warning device, equipped with 12 LEDs and 3 additional LEDs that act as a torch. The flare offers 5 types of illumination and its working time is up to 24 hours. Powered by 3 AAA cells (not supplied). Thanks to the practical magnet, it can be easily mounted on the body of the vehicle. The NEO TOOLS road warning flare takes up little space in the car and ensures safety in emergency situations thanks to its good visibility from afar. Recommended as permanent car equipment.
NEO's 97-567 helmet ear muffs allow you to work with an industrial helmet and ear muffs at the same time. They are particularly useful in factories where both head and hearing protection are required. They are characterised by an SNR of 29 dB. They have a soft finish for increased wearing comfort. The adjustable height of the earmuffs and the ability to tilt and swivel the arms allow the wearer to work with the earmuffs attached, without having to detach them from the helmet in the event of a change in audibility. The product is compatible with all NEO TOOLS brand helmets. It is CE certified.
NEO anti-noise earmuffs (ref. 97-563) are designed for protection against considerable noise. The signal to noise ratio of the headphones is 30 dB. Insulation made of G-Tech foam, provides very good protection against intense noise. Thanks to cushioned headband and proper profiling, the earcups fit your head perfectly without pressing. CE marking is a guarantee of safety, it proves that the product meets all EU requirements.
Fingerless Magnetic Work Gloves, Size 10" NEO (Ref. GD014) have a magnet on the back to keep screws, nuts and other small parts close at hand for the do-it-yourselfer while working. Three exposed fingertips allow for precise work. Fingertips and wrists are protected by a rubber coating which acts as a shock absorber and reduces abrasion. Velcro on the wrist allows to adjust the circumference. The gloves comply with the EN 388 standard. Available in size 10".
Work sandals S1 FO SR, ESD 82-069-40 by NEO TOOLS are footwear made for industrial environments requiring foot protection, comfort and static charge control. The cowhide leather upper combined with a knitted mesh lining and numerous ventilation holes ensure better air circulation and reduce overheating of the foot. The PU/PU sole used meets the requirements of the FO class, which means resistance to petrol and oils; while the SR class is a confirmation of resistance to slipping on ceramic ground covered with sodium lauryl sulphate solution (SLS). NEO TOOLS footwear features a composite toecap to protect the toes; as well as a hook-and-loop fastening for a quick shoe-to-foot fit. The HI-POLY foam insole improves comfort during prolonged work. The sandals have ESD anti-electrostatic properties, with a narrow electrical resistance range of 0.75 MΩ to 35 MΩ, effectively dissipating electrical charges. The model is designed for applications in the electronics, computer, chemical, automotive, pharmaceutical, optical, food, aerospace and petrochemical industries, among others. NEO TOOLS footwear is available in sizes 39-47 and has a CE certificate confirming compliance with the EN ISO standard.
OUTDOOR work trousers, jogger type, grey, size S 81-285-2-S by NEO TOOLS are grey trousers characterised by a dobby weave fabric of 80% cotton, 17% polyester and 3% spandex. The weight is 280 g/m2. Fitted with an elastic band and an additional drawstring at the waist. No fastening on the front. NEO TOOLS trousers have side pockets with piping, additional zipped thigh pockets and space pockets above the knee. The profiled knee on the front and back provides greater comfort. At the bottom of the leg, a cuff with elastic on the outside guarantees freedom of movement. On the other hand, two zipped patch pockets provide more storage. It features a printed logo on the pocket patch above the knee, as well as a name tag for better personalisation. The OUTDOOR jogger type work trousers are a unique in-house design by NEO TOOLS.
OUTDOOR work trousers, jogger type, grey, size XL 81-285-2-XL by NEO TOOLS are grey trousers characterised by a dobby weave fabric of 80% cotton, 17% polyester and 3% spandex. The weight is 280 g/m2. Fitted with an elastic band and an additional drawstring at the waist. No fastening on the front. NEO TOOLS trousers have side pockets with piping, additional zipped thigh pockets and space pockets above the knee. The profiled knee on the front and back provides greater comfort. At the bottom of the leg, a cuff with elastic on the outside guarantees freedom of movement. On the other hand, two zipped patch pockets provide more storage. It features a printed logo on the pocket patch above the knee, as well as a name tag for better personalisation. The OUTDOOR jogger type work trousers are a unique in-house design by NEO TOOLS.
Work sandals S1 FO SR, ESD 82-069-42 by NEO TOOLS are footwear made for industrial environments requiring foot protection, comfort and static charge control. The cowhide leather upper combined with a knitted mesh lining and numerous ventilation holes ensure better air circulation and reduce overheating of the foot. The PU/PU sole used meets the requirements of the FO class, which means resistance to petrol and oils; while the SR class is a confirmation of resistance to slipping on ceramic ground covered with sodium lauryl sulphate solution (SLS). NEO TOOLS footwear features a composite toecap to protect the toes; as well as a hook-and-loop fastening for a quick shoe-to-foot fit. The HI-POLY foam insole improves comfort during prolonged work. The sandals have ESD anti-electrostatic properties, with a narrow electrical resistance range of 0.75 MΩ to 35 MΩ, effectively dissipating electrical charges. The model is designed for applications in the electronics, computer, chemical, automotive, pharmaceutical, optical, food, aerospace and petrochemical industries, among others. NEO TOOLS footwear is available in sizes 39-47 and has a CE certificate confirming compliance with the EN ISO standard.
OUTDOOR work trousers, jogger type, grey, size XXXL 81-285-2-XXXL by NEO TOOLS are grey trousers characterised by a dobby weave fabric of 80% cotton, 17% polyester and 3% spandex. The weight is 280 g/m2. Fitted with an elastic band and an additional drawstring at the waist. No fastening on the front. NEO TOOLS trousers have side pockets with piping, additional zipped thigh pockets and space pockets above the knee. The profiled knee on the front and back provides greater comfort. At the bottom of the leg, a cuff with elastic on the outside guarantees freedom of movement. On the other hand, two zipped patch pockets provide more storage. It features a printed logo on the pocket patch above the knee, as well as a name tag for better personalisation. The OUTDOOR jogger type work trousers are a unique in-house design by NEO TOOLS.
Work sandals S1 FO SR, ESD 82-069-43 by NEO TOOLS are footwear made for industrial environments requiring foot protection, comfort and static charge control. The cowhide leather upper combined with a knitted mesh lining and numerous ventilation holes ensure better air circulation and reduce overheating of the foot. The PU/PU sole used meets the requirements of the FO class, which means resistance to petrol and oils; while the SR class is a confirmation of resistance to slipping on ceramic ground covered with sodium lauryl sulphate solution (SLS). NEO TOOLS footwear features a composite toecap to protect the toes; as well as a hook-and-loop fastening for a quick shoe-to-foot fit. The HI-POLY foam insole improves comfort during prolonged work. The sandals have ESD anti-electrostatic properties, with a narrow electrical resistance range of 0.75 MΩ to 35 MΩ, effectively dissipating electrical charges. The model is designed for applications in the electronics, computer, chemical, automotive, pharmaceutical, optical, food, aerospace and petrochemical industries, among others. NEO TOOLS footwear is available in sizes 39-47 and has a CE certificate confirming compliance with the EN ISO standard.
Work sandals S1 FO SR, ESD 82-069-44 by NEO TOOLS are footwear made for industrial environments requiring foot protection, comfort and static charge control. The cowhide leather upper combined with a knitted mesh lining and numerous ventilation holes ensure better air circulation and reduce overheating of the foot. The PU/PU sole used meets the requirements of the FO class, which means resistance to petrol and oils; while the SR class is a confirmation of resistance to slipping on ceramic ground covered with sodium lauryl sulphate solution (SLS). NEO TOOLS footwear features a composite toecap to protect the toes; as well as a hook-and-loop fastening for a quick shoe-to-foot fit. The HI-POLY foam insole improves comfort during prolonged work. The sandals have ESD anti-electrostatic properties, with a narrow electrical resistance range of 0.75 MΩ to 35 MΩ, effectively dissipating electrical charges. The model is designed for applications in the electronics, computer, chemical, automotive, pharmaceutical, optical, food, aerospace and petrochemical industries, among others. NEO TOOLS footwear is available in sizes 39-47 and has a CE certificate confirming compliance with the EN ISO standard.
Work sandals S1 FO SR, ESD 82-069-39 by NEO TOOLS are footwear made for industrial environments requiring foot protection, comfort and static charge control. The cowhide leather upper combined with a knitted mesh lining and numerous ventilation holes ensure better air circulation and reduce overheating of the foot. The PU/PU sole used meets the requirements of the FO class, which means resistance to petrol and oils; while the SR class is a confirmation of resistance to slipping on ceramic ground covered with sodium lauryl sulphate solution (SLS). NEO TOOLS footwear features a composite toecap to protect the toes; as well as a hook-and-loop fastening for a quick shoe-to-foot fit. The HI-POLY foam insole improves comfort during prolonged work. The sandals have ESD anti-electrostatic properties, with a narrow electrical resistance range of 0.75 MΩ to 35 MΩ, effectively dissipating electrical charges. The model is designed for applications in the electronics, computer, chemical, automotive, pharmaceutical, optical, food, aerospace and petrochemical industries, among others. NEO TOOLS footwear is available in sizes 39-47 and has a CE certificate confirming compliance with the EN ISO standard.
OUTDOOR work trousers, jogger type, grey, size XS 81-285-2-XS by NEO TOOLS are grey trousers characterised by a dobby weave fabric of 80% cotton, 17% polyester and 3% spandex. The weight is 280 g/m2. Fitted with an elastic band and an additional drawstring at the waist. No fastening on the front. NEO TOOLS trousers have side pockets with piping, additional zipped thigh pockets and space pockets above the knee. The profiled knee on the front and back provides greater comfort. At the bottom of the leg, a cuff with elastic on the outside guarantees freedom of movement. On the other hand, two zipped patch pockets provide more storage. It features a printed logo on the pocket patch above the knee, as well as a name tag for better personalisation. The OUTDOOR jogger type work trousers are a unique in-house design by NEO TOOLS.
The Mix&Match 2way stretch short shorts, green, size L, 81-299-1-L by NEO TOOLS is a model designed for everyday wear, made of 2way stretch fabric. Soft to the touch (cotton touch technology), they have a material composition of 100% polyester and a weight of 185 g/m². The shorts have an elastic waistband, two zipped pockets and one buttoned pocket. The durable, elastic fabric used ensures comfort in use. NEO TOOLS shorts have a name tag and CE certificate compliance.
