Bi-metal hole saw 35 mm

GRAPHITE's 10mm 56T728 diamond hole saw has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.

The 70 mm bi-metal hole saw 56T717 by GRAPHITE, with a height of 44 mm, allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 125 rpm, Inox steel - 60 rpm, aluminium - 185 rpm, wood - 160 rpm, cast iron - 80 rpm, brass - 160 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.

GRAPHITE's 30mm bi-metal hole saw 56T706 is 51mm high and allows drilling to a depth of 38mm. It is made from HSS high speed steel and is fitted with a 1/2'' x 20 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T753 adapter with pilot drill bit for bi-metal hole saws in the 14-30 mm range. Maximum speeds for this tool, vary depending on the material: steel - 285 rpm, Inox steel - 145 rpm, aluminium - 425 rpm, wood - 410 rpm, cast iron - 190 rpm, brass - 380 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.

GRAPHITE's 56T606 35mm fork cutter is designed for drilling holes in wood, furniture boards and plastics. The carbide-tipped (TCT) blades provide durability and a precise finish. The design of the tool allows for flat-bottomed holes and the self-centring tip allows for accurate positioning in the material. The GRAPHITE cutter has central and external cutting blades, an overall length of 85mm and a cylindrical shank.

Fibra sanding disc GRAPHITE (ref. no. 55H856) with outer diameter 125 mm and granulation 60. Dedicated to grinding metal, steel, plastic, wood and even finishing putty. Ideally suited for deburring, removing rust and processing of welds. The disc with close coating. 100% of the disc surface is covered with abrasive grain (alumina), which guarantees greater processing accuracy and increased working efficiency. The disc is mounted to an angle grinder using a dedicated flexible disc. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.