Недавно просмотренные товары
02-57T304
GRAPHITE's 57T304 solid diamond cutting wheel, 230 x 22.2 mm, wet 57T304 is a solid diamond cutting wheel with a diameter of 230 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 5 mm high and 2.6 mm wide. The maximum speed of the disc is 6 600 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting terracotta, stoneware, granite and marble.
02-58T387
Flap wheel 60 x 15 x 6 mm, P40, 58T387 by GRAPHITE has dimensions 60 × 15 × 6 mm and gradation P40. It is designed for universal use, especially for machining hard-to-reach areas. The grain is made of electro-corundum and the bond is synthetic resin. The maximum speed recommended for this GRAPHITE brand grinding wheel is 11,000 rpm and the working speed is 35 m/s.
02-58T399
The 50 × 20 × 6 mm, P40, 58T399 flap wheel by GRAPHITE has dimensions of 50 × 20 × 6 mm and gradation P40. It is designed for universal use, especially for machining hard-to-reach areas. The grain is made of electro-corundum and the bond is synthetic resin. The maximum speed recommended for this GRAPHITE brand grinding wheel is 13,000 rpm and the working speed is 35 m/s.
02-56T709
The 40 mm bi-metal hole saw 56T709 by GRAPHITE, with a height of 44 mm, allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 220 rpm, Inox steel - 110 rpm, aluminium - 330 rpm, wood - 290 rpm, cast iron - 145 rpm, brass - 290 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
02-57T215
Saw blade, widia, 180 x 30 mm, 40 teeth 57T215 by GRAPHITE, with an external diameter of 180 mm and a mounting hole diameter of 30 mm. It has 40 teeth, the cut width is 2 mm and the tooth angle is 15°. The maximum speed is 10,000 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.
