Недавно просмотренные товары
52-2500900
- Compressed air tank according to AD 2000 / without fitting set / 11 and 16 bar
- Hot dip galvanized inside and outside
- Constructed in accordance with EC Directive 87/404 / EEC or PED 97/23 / EC -AD 2000, Module: H / H 1
- Operating conditions according to AD 2000 - S1 (10/2000) = arrivals and departures and 20% pressure fluctuation range
- ISO 9001:2015 certified manufacturer
ManufacturerMaschinen- und Behälterbau GmbH
Betzdorfer Straße 170, 57567 Daaden, Germany
www.mabe.de
52-2048018
- Absorbed oils are reliably bound in hermetically sealed cartridges - no contact with contaminants
- Easy adjustment to changing compressed air and condensate requirements
- Condensate is actively pressed through the pre-filter and main filter with light blasts of compressed air
- Permanent function monitoring
- Fail-safe mode in the event of a power failure and loss of compressed air: QWIK-PURE continues to work like conventional gravity separators
QWIK-PURE series
- Absorbed oils are reliably bound in hermetically sealed cartridges - no contact with contaminants
- Simple, clean and ergonomic cartridge replacement
- Simple adjustments to changing compressed air and condensate requirements
- Sizing according to service interval or compressor capacity
From QWIK-PURE 15
- Condensate is actively pressed through the pre-filter and main filter with light blasts of compressed air
- Permanent function monitoring
- Integrated FRC control unit: reliable display of the remaining capacity of the cartridges and automatic monitoring of when condensate needs to be pushed through with light blasts of compressed air
- Integrated monitoring optimally utilizes the cartridges
- Remote monitoring possible thanks to network capability
- No overflowing of the system thanks to active operating principle with automatic drainage
- Fail-safe mode in the event of power failure and loss of compressed air: independent initiation of measures and triggering of alarms in the event of problems. For safe operation, QWIK-PURE then continues to work like conventional gravity separators.
ManufacturerBEKO Technologies GmbH
Im Taubental 7, 41468 Neuss, Germany
www.beko.de
52-2500505
- Hot-dip galvanised inside and outside with fifteen-year warranty against rusting through
- Built according to EC Directive 87/404/EEC or DGRL 97/23/EC -AD 2000, module: H / H 1
- operating conditions according to AD 2000 - S1 (10/2000) = starts and stops and 20% pressure fluctuation range
ManufacturerAircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at
52-2048011
function Description
- For treatment, the oil-containing condensate first passes under pressure into the pressure relief chamber.
- There, the overpressure is reduced, without causing turbulence in the subsequent separation tank for free oil separation.
- Carried coarse dirt particles are retained in a removable catch.
- In the separation tank, the oil settles on the surface through gravity separation and is led into the overflow-proof oil catch tank (version available on request).
- The filter makes the difference: The pre-cleaned condensate flows through the oleophilic pre-filter, which has a large active filter area. Flowing through from the inside to the outside, it binds the remaining oil droplets and also absorbs residual, floating oil in the filter chamber.
- In the OEKOSORB® main filter with cartridge technology, the last oil components are reliably retained. What remains is water for direct discharge into the sewage system.
The advantages at a glance
- System-compatible size
- Installation on wall possible with ÖWAMAT® 10 and ÖWAMAT® 11
- Long service life of the filter units
- Easy retrofitting of a heater at any time
- Easiest handling by cartridge technology
- Type approval with and without free oil separation
- No energy costs
Manufacturer
BEKO Technologies GmbH
Im Taubental 7, 41468 Neuss, Germany
www.beko.de
52-2500818
- Compressed air tank according to AD 2000 / without fitting set / 11 and 16 bar
- Hot dip galvanized inside and outside
- Constructed in accordance with EC Directive 87/404 / EEC or PED 97/23 / EC -AD 2000, Module: H / H 1
- Operating conditions according to AD 2000 - S1 (10/2000) = arrivals and departures and 20% pressure fluctuation range
- ISO 9001:2015 certified manufacturer
ManufacturerMaschinen- und Behälterbau GmbH
Betzdorfer Straße 170, 57567 Daaden, Germany
www.mabe.de
