Сортировать по
Показать по на странице
02-57H350
Sobivad materjalid:
- betoon
- tellis
- looduslik ja tehiskivi
- keraamilised materjalid
33-113D
SDS+ shank, compatible with rotary hammers.
3‑cut carbide head (Booster Plus).
Self‑centering tip for precise hole starts.
Square spiral flute for fast dust evacuation.
Suitable for reinforced concrete.
Set contents (7 pcs):
L 110 mm: Ø 6 · 8 · 10 mm
L 160 mm: Ø 6 · 8 · 10 · 12 mm
33-115C
Ø5 (x2) L 50x110 mm
Ø6 (x2) 8 L 100x160 mm
Sobivad materjalid:
33-136C
SDS+ shank, compatible with rotary hammers.
2‑cut carbide tip (Twister Plus) for fast drilling.
Z‑line centering tip for accurate hole starts.
TRI‑ZONES helix for efficient dust evacuation.
High durability and long service life.
Set contents (5 pcs):
Ø 6 × 110 mm
Ø 8 × 110 mm
Ø 6 × 160 mm
Ø 8 × 160 mm
Ø 10 × 160 mm
Suitable materials:
- Concrete
- Stone
- Brick
- Masonry
33-201C
PRO‑seeria kivipuurid silindrilise varrega
Poolpositiivne karbiidots – kiire ja täpne puurimine
Kahe spiraaliga disain – tõhus tolmueemaldus
Sobib löögiga ja löögita puurimiseks
Hea töökindlus igapäevases kasutuses
Komplekti sisu (5 tk):
Ø 4 mm
Ø 5 mm
Ø 6 mm
Ø 8 mm
Ø 10 mm
Sobivad materjalid:
- Betoon
- Kivi
- Tellis
- Tuhaplokk
- Krohv ja müüritis
33-214B
Ceramik series drill bits for ceramics and tiles.
High‑strength carbide tip for durability.
Centering point for precise drilling starts.
Positive cutting edges for clean holes.
Non‑impact use only.
Set contents (5 pcs):
Ø 4 mm
Ø 5 mm
Ø 6 mm
Ø 8 mm
Ø 10 mm
Suitable materials:
- Ceramic tiles
- Wall tiles and glazed ceramics
- Faience and similar ceramic surfaces
33-215B
Multi‑material drill bits.
Carbide tip with centering point.
118° point angle for accurate starts.
4‑facet sharpening for clean cuts.
Non‑impact use only.
Set contents (5 pcs):
Ø 4 mm
Ø 5 mm
Ø 6 mm
Ø 8 mm
Ø 10 mm
Suitable materials:
- Wood and low‑density wood materials
- Alloy steels and metals
- Ceramic tiles
- Slate
- Brick
- Composite materials (including fiberglass)
33-250C
Flash‑series masonry drill bits for cordless drills.
Refined carbide tip for improved centering.
Up to 20% longer battery life.
Straight cylindrical shank for wide compatibility.
Designed for non‑impact (rotary) drilling.
Set contents (8 pcs):
Ø 3 mm
Ø 4 mm
Ø 5 mm
Ø 6 mm
Ø 7 mm
Ø 8 mm
Ø 9 mm
Ø 10 mm
Suitable materials:
- Concrete
- Stone
- Brick
- Breeze block
- Plaster
33-408C
Ceratile carbide‑tipped drill bits for glass and ceramics.
4 sharpened cutting edges for accurate drilling starts.
Copper‑brazed carbide tip for improved heat resistance.
Suitable for ceramic tiles up to class 3.
Non‑impact use only (rotation mode).
Fast, clean penetration in delicate materials.
Set contents (5 pcs):
Ø 6 mm – 3 pcs
Ø 8 mm – 2 pcs
Suitable materials:
- Ceramic tiles
- Glass (non‑tempered)
- Plastics and composites
- Marble
- Solid and hollow brick
33-426B
Diamond‑coated hole saws for long service life.
Dry drilling – no water cooling required.
M14 thread – direct fit on angle grinders.
Clean cuts in porcelain and natural stone.
Ideal for electrical and plumbing installations.
Set contents (9 pcs):
Ø 6 mm – 2 pcs
Ø 8 mm – 2 pcs
Ø 10 mm – 1 pc
Ø 15 mm – 1 pc
Ø 20 mm – 1 pc
M14 arbor for angle grinders
Sharpening / dressing stone
Suitable materials:
- Porcelain and ceramic tiles
- Natural stone and marble
- Fiberglass and composite materials
- Glass (non‑tempered)
33-700C
HSS PRO fully ground for precise drilling.
118° split‑point tip for accurate hole starts.
DIN 338 / DIN 1897, N‑type flute.
Cylindrical shank, compatible with standard and bench drills.
Reliable all‑round metal drilling set.
Set contents (6 pcs):
Ø 2 mm
Ø 3 mm
Ø 4 mm
Ø 5 mm
Ø 6 mm
Ø 8 mm
33-706C
HSS‑Co 5% cobalt steel – excellent heat and wear resistance
135° split‑point tip – precise starts without center punching
DIN 338, N‑type flute
Fully ground for durability and clean drilling
Cylindrical shank, suitable for standard and bench drills
Set contents (6 pcs):
Ø 2 mm
Ø 3 mm
Ø 4 mm
Ø 5 mm
Ø 6 mm
Ø 8 mm
Suitable materials:
- Stainless steel
- Alloyed and non‑alloyed steels
- Cast iron
33-708D
HSS‑CO with 5% cobalt for superior heat and wear resistance.
Suitable for stainless steel, alloyed and non‑alloyed steels.
135° split point tip for accurate, slip‑free drilling starts.
Fully ground drill bits for clean and precise cuts.
DIN 338, N‑type flute, diameter tolerance h8.
Set contents (19 pcs):
Diameters in 0.5 mm increments:
1.0 – 1.5 – 2.0 – 2.5 – 3.0 – 3.5 – 4.0 – 4.5 – 5.0 – 5.5 – 6.0 – 6.5 – 7.0 – 7.5 – 8.0 – 8.5 – 9.0 – 9.5 – 10.0 mm
Applications:
- Stainless steel
- Alloyed and non‑alloyed steel
- Cast iron
- Structural and technical metals
33-745D
Fully ground HSS PRO drill bits for high precision.
118° split point tip for accurate, slip‑free starts.
DIN 1897, N‑type flute.
Diameter tolerance h8 for consistent hole quality.
Versatile set for everyday metalworking applications.
Set contents (19 pcs):
Diameters in 0.5 mm increments:
1.0 – 1.5 – 2.0 – 2.5 – 3.0 – 3.5 – 4.0 – 4.5 – 5.0 – 5.5 – 6.0 – 6.5 – 7.0 – 7.5 – 8.0 – 8.5 – 9.0 – 9.5 – 10.0 mm
Applications:
- Non‑alloy steel
- Alloy steel (up to 900 N/mm²)
- Cast iron
