Dust protection half-mask with active carbon, folding, with valve, FFP1, 3 pcs

The NEO TOOLS half boots S1 FO, steel toecap, size 42, 82-162-42 by NEO TOOLS are footwear made in the protective category S1 FO, characterised by a toecap providing protection against impacts with an energy equal to 200J, resistance to oils, petrol and other organic solvents. NEO TOOLS work boots have a robust steel toecap, a flyknit knitted upper and a knitted "mesh" lining. The shoes are also equipped with a PU/PU sole and an EVA foam insole. The metal toecap protects the foot from injury. The upper of the NEO TOOLS flyknit type work boots is woven from a single thread, which contributes to the lightweight construction and very good fit of the footwear to the foot. The product is CE certified in accordance with the EN ISO 20345 standard.

GRAPHITE's 125 mm diameter wire wheel brush, twisted steel wire, M14, 57T411 by GRAPHITE is made from twisted steel wire. Equipped with an M14 thread, it is designed for use with angle grinders. The maximum speed of the tool is 12500 rpm. The product meets the requirements of EN 1083-2 and is well suited for roughing metal surfaces, aggressive cleaning, removing rust, paint or dirt.

GRAPHITE bi-metal holesaws 19-68 mm, set of 7 pieces 56T723 by GRAPHITE with a height of 51 mm (for 19, 29, 33 mm diameters) and 44 mm (for 51, 68 mm diameters) allow drilling to a depth of 38 mm. They are made of HSS and are equipped with 1/2'' x 20 UNF (19, 29 mm), 5/8" x 18 UNF (33, 51, 68 mm) threads. Designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. GRAPHITE holesaws are recommended to be used with the adapters offered in the kit - 3/8 Hex and 7/16 Hex. Maximum speeds for these tools, vary depending on the material: steel - 460 rpm (for a diameter of 19 mm), 300 rpm (for a diameter of 29 mm), 260 rpm (for a diameter of 33 mm), 170 rpm (for a diameter of 51 mm), 130 rpm (for a diameter of 68 mm); Inox steel - 230 rpm (for a diameter of 19 mm), 300 rpm (for a diameter of 29 mm), 260 rpm (for a diameter of 33 mm), 170 rpm (for a diameter of 51 mm), 130 rpm (for a diameter of 68 mm); Inox steel - 230 rpm (for a diameter of 19 mm)./rpm (for 19 mm diameter), 150 rpm (for 29 mm diameter), 135 rpm (for 33 mm diameter), 85 rpm (for 51 mm diameter), 65 rpm (for 68 mm diameter); aluminium - 690 rpm (for 19 mm diameter), 450 rpm (for 29 mm diameter), 390 rpm (for 33 mm diameter), 255 rpm (for 51 mm diameter), 130 rpm (for 68 mm diameter); stainless steel - 150 rpm (for 33 mm diameter), 150 rpm (for 51 mm diameter), 130 rpm (for 51 mm diameter); stainless steel - 230 rpm (for 19 mm diameter), 150 rpm (for 29 mm diameter), 135 rpm (for 33 mm diameter), 85 rpm (for 51 mm diameter), 65 rpm (for 68 mm diameter); aluminium - 690 rpm (for 19 mm diameter), 450 rpm (for 33 mm diameter), 255 rpm (for 51 mm diameter)/rpm (for diameter 51 mm), 190 rpm (for diameter 68 mm); wood - 680 rpm (for diameter 19 mm), 450 rpm (for diameter 29 mm), 390 rpm (for diameter 33 mm), 200 rpm (for diameter 51 mm), 165 rpm (for diameter 68 mm); cast iron - 300 rpm (for diameter 19 mm), 200 rpm (for diameter 29 mm), 200 rpm (for diameter 33 mm), 200 rpm (for diameter 33 mm), 165 rpm (for diameter 33 mm); cast iron - 300 rpm (for diameter 29 mm), 200 rpm (for diameter 33 mm), 200 rpm (for diameter 33 mm), 200 rpm (for diameter 51 mm), 190 rpm (for diameter 68 mm)./(for 29 mm diameter), 175 rpm (for 33 mm diameter), 115 rpm (for 51 mm diameter), 85 rpm (for 68 mm diameter); brass - 600 rpm (for 19 mm diameter), 400 rpm (for 29 mm diameter), 345 rpm (for 33 mm diameter), 230 rpm (for 51 mm diameter), 165 rpm (for 68 mm diameter). The bi-metal holesaws are designed to be used with a drill or drill/driver.

GRAPHITE metal drill with 5.0 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.

OUTDOOR work trousers, 4 way stretch, green-grey, size L, 81-293-L by NEO TOOLS are trousers made of 4 way stretch fabric, characterised by a composition of 92% nylon, 8% spandex and a weight of 230 g/m2. Thanks to their green-grey colour with dark grey inserts, they are resistant to visible dirt. They feature zipped pockets on the thighs and back, a profiled knee, ventilation in the inner seam, a printed logo on the belt loop and a name tag. Their leg construction has been developed without a side seam, which contributes to their comfort. NEO TOOLS work trousers are a unique in-house brand design, providing comfort, durability and multi-tasking for everyday use.