Electromagnetic start-up relief 24V AC normally open

Manufacturer
Aircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at

• Robust features and top quality
• Fully automatic on-off operation
• With all safety features
• Fully wired
• From 7.5 kW standard with automatic star-delta switch
• Fifteen-year rust-proof warranty on inside and outside hot-dip galvanized compressed air tank

Quality electric motor

• High quality electric motor with motor protection switch
• Start-up capacitor and start-up relief valve for easy start-up
• As standard with phase inverter for easy manual reversal of the direction of rotation

Compressed air compression via high-performance aggregate HOS

• The start-up relief valve ensures a light, pressureless start
• The two-cylinder high-performance cast iron unit and the low speed warranty a particularly quiet and low-vibration operation ; this ensures a long service life through minimized wear
• Optimal lubrication of the compressor for long service life and reliability
• Equipped with high-quality intake filter
• Aftercooler with large cooling fins causes low boiler inlet temperature and less humidity in the compressed air to protect the compressed air tools
• additionally with intercooler to the aftercooler
• Corrosion-free valve plates for improved heat dissipation and longevity of the compressor.
• Optimal cooling of the compressor due to large Fan and cooling air guide on the cylinder
• Sturdy belt guard made of metal for optimum protection of the components and for high user safety
• No vibration breakage of the compressed air supply into the boiler due to flexible armored hose line with heat protection

High-quality drive belt

• Powerful and economical drive
• The toothed drive belt makes it easier to start, improves smoothness and power transmission, and reduces power consumption by up to 30%
• Sturdy metal belt guard

Service block operation

• Equipped with a high-quality CONDOR push button switch with a robust push button function for fully automatic on / off operation
• Air extraction on the maintenance block via a comfort -Safety quick coupling
• On the maintenance block only fixed screw connections, no hose connections

High-quality boiler with durable rust protection

• AIRCRAFT was the first manufacturer to do so The compressors of the AIRPROFI series are equipped as standard with internal and external hot-dip galvanized boilers. Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank.

Manufacturer
Aircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at

Manufacturer
Aircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at

Special

• Drying by partial vapor pressure compensation of water vapor by diffusion in combination with a highly selective membrane
• No change in the compressed air composition - can be used for breathing air treatment

Efficient

• Reaches the required pressure dew point with low energy consumption
• Very fast availability of dried compressed air
• Filtration and drying compact in one device

Robust

• Housing made of seawater-resistant aluminum
• Low-maintenance, currentless technology

System-compatible

• Modularly combinable with CLEARPOINT Filter program
• Can be used anywhere along the compressed air treatment chain - can also be integrated into system technology

• The ultimate membrane dryer technology with integrated nanofilter
• Filtration and drying in one housing (simple filter element change)
• Low purge air requirement (Twist 60 technology)
• Availability of dried compressed air immediately without running-in phase
• Safe drying due to the high partial vapor pressure gradient
• No change in the compressed air temperature and composition
• Proven 100,000 times
• Maintenance-free (except filter element change)
• For diverse applications, including for breathing air treatment
• Also ideal for use directly behind the compressor / aftercooler
• Optionally also for higher loads (assembly potting, 16 bar, 70°C)
• For a reliable function of the DRYPOINT M membrane dryer must meet the following requirements:
1. The incoming compressed air must not contain any liquid condensate
2. Particles larger than 1 μm must be separated before the membrane dryer
3. The oil content of the compressed air must not exceed 0.01 mg/m³.

• DRYPOINT M membrane dryers have been an alternative to existing ones for years Compressed air drying process proven.

Advantages DRYPOINT M PLUS

• Proven process of highest reliability and functional safety
• Immediate availability of dry compressed air, even when working discontinuously
• Low purge air requirement, compressed air drying can be adjusted to the application
• Compact and robust, small space requirement due to low overall height
• Compressed air inlet and outlet on one level (filter version), easy to combine with CLEARPOINT filters
• Maintenance and wear-free as there are no moving parts
• No reduction in the oxygen content, therefore also suitable for breathing air treatment
• No electrical connection, also suitable for Ex areas
• Long service life in case of use of CLEARPOINT filters
• Environmentally friendly, does not require CFCs / CFC-containing refrigerants or adsorbents
• Complete solution: filtration and dryer in a compact form, integration of drain pipe
• Filtration at the point in the treatment chain where the highest efficiency is achieved
• Easy maintenance / replacement of filter element as with a regular filter

Filter element: N (nanofilter)

• The CLEARPOINT filter element type N is used to separate solid particles down to 0.01 micron, water and oil aerosols . The element has a multi-stage structure for efficient and long-lasting filtering. In the first stage, coarse particles are retained by a pre-filter layer. In the second stage, finer particles are absorbed by a depth filter bed made of high-performance borosilicate fiber fabric. Due to the very large cavity volume of the filter medium (96%), a very high dirt holding capacity is achieved. The filter medium is specially impregnated in order to avoid cross-sectional swelling of the individual fibers.

Trap: Float trap

• The basic version includes a float drain.

Size 10 - 40

• This size is for the demand-oriented compressed air drying of medium volume flows configured. Different levels of drying of the compressed air are achieved through different purge air settings.

Manufacturer
BEKO Technologies GmbH
Im Taubental 7, 41468 Neuss, Germany
www.beko.de

Maximum tank volume in a minimum of space - the space-saving solution

• Boiler batteries for up to 400 liters of additional air supply
• Available as 2-pack and 4-pack batteries
• All tank batteries also available in 13 bar version with 75 l tanks
• By connecting additional compressed air tanks, the tank volume is increased, whereby a higher air supply can be built up.
• Increased air demand can be covered at short notice
• If required, individual compressed air tanks can be disconnected from the compressed air supply via ball valves, which reduces the tank volume accordingly and thus builds up the pressure more quickly.
• Fifteen-year warranty against rusting through on the inside and outside of hot-dip galvanized air reservoirs.
• All tank batteries can be easily moved with the lift truck

Manufacturer
Aircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at

Advantages of DRYPOINT eco control

• Integrated DRYPOINT M Plus solution: filtration and dryer in a compact form, as well as condensate drain integrated
• Filtration on the spot in the treatment chain where the highest efficiency is achieved
• Easy maintenance / replacement of filter element as with a filter
• Application-specific degree of dryness can be selected
• Consistent compressed air quality under fluctuating operating conditions
• Energy saving through minimization of purging air consumption for actual amount of useful air and degree of drying
• Power evaluation via LED, forwarding via current output 4 … 20 mA possible
• User-friendly: Easy to use, test functions, error messages
• Concept based on the fail-safe principle, error message can be picked up via potential-free contact

Functionality of the DRYPOINT® M eco control

Based on the measurement result from the sensor, the control software decides in defined cycles whether and how long the full amount of purge air has to be provided to achieve and stabilize the required degree of dryness. This process is implemented by means of a targeted clocking of a solenoid valve. In each cycle, the duration of the two process sections described below varies in order to keep the degree of drying within the specified tolerance range.

Manufacturer
BEKO Technologies GmbH
Im Taubental 7, 41468 Neuss, Germany
www.beko.de