The SDS+ 900 W, 3.4J, case 58G539 hammer drill by GRAPHITE is a 900 W specialist SDS+ tool with drilling and percussion functions. It can drill holes up to 28mm in diameter in concrete and brick, 13mm in steel and 30mm in wood. The tool features spindle reversing, gradual speed control and an on/off switch lock for continuous operation. While drilling, the hammer drill reaches up to 950 revolutions per minute, and up to 5300 strokes per minute when switched to percussion (the percussion function is activated when the drill bit is pressed against the drilled surface). The impact energy of the tool is 3.4 J. The convenient "click" function is designed for fast attachment of the drill bit. The tool's comfortable main handle is covered with a non-slip grip, so it lies well in the hand. The set includes: additional drill bits, drill chuck, chuck adapter, drilling depth stop bar, rotating auxiliary handle, lubricant reservoir and carrying case. The unit is equipped with a flexible and durable 3 m rubber-coated power cable, also dedicated to professional and industrial applications, both indoors and outdoors. Compliance with European standards is ensured by CE certification.
The SDS+ 900 W, 4J 58G860 impact hammer by GRAPHITE is a specialist 900 W SDS+ 3-function tool that is indispensable for installation and demolition work. It has drilling, impact and a shoring function, needed when chipping plastered or tiled surfaces. The maximum percussion energy is 4 J, giving the unit an advantage when tackling concrete, stone or brick. The maximum percussion rate at nominal speed is 3850 min-¹, and the maximum drilling speed is 980 min-¹. The two-finger switch contributes to its comfort. The flexible, robust power cable is in a 4 m rubber sheath and is dedicated to both professional and industrial indoor or outdoor use. The hammer is offered with: drill bit, pick, mounting key, swivel auxiliary handle, drilling depth stop with tool-free length adjustment, lubricant reservoir and practical carrying case. CE certification ensures compliance with European standards.
GRAPHITE edge trimmer (ref. 59G718) with 510W and 6-8 mm handle is designed for fine profiling work on edges. The ergonomic and soft grip handle, soft grip overlay and low weight make the trimmer easy and pleasant to work with. The trimmer is adjustable in working depth. The transparent base plate of the trimmer ensures visibility of the cutter and the work piece.
Set includes: 2 spanners, 2 router bits, 3 collets, 1 guide sleeve, 1 guide bar, 1 copying bar, 1 copying bar.
GRAPHITE's SDS+ 710W, 2.6J, case 58G537 hammer drill is a 710W specialist SDS+ tool with drilling, hammer drilling, shoeing functions and an infinitely adjustable chisel angle for precision shoeing. It can drill holes up to 24mm in diameter in concrete, 13mm in steel and 30mm in wood. The tool features spindle reversal with no loss of power at left-hand speeds and an on/off switch lock for continuous operation. When drilling, the hammer drill reaches up to 1,350 revolutions per minute and up to 5,500 strokes per minute when switched to impact. The tool's percussion energy is 2.6 J. The tool's comfortable main handle is covered with a non-slip pad, so it fits well in the hand. The kit includes a concrete drill bit, drill chuck, chuck adapter and carrying case. The unit is equipped with a flexible and durable 3 m rubber-coated power cable, also dedicated to professional and industrial applications, both indoors and outdoors. Compliance with European standards is ensured by CE certification.
GRAPHITE's 800W, 2.8J SDS+ hammer drill, 2.8J, case 58G538 is a specialist 800W SDS+ tool with drilling, hammer drilling, shoeing functions and an infinitely adjustable chisel angle for precision shoeing. It can drill holes up to 26mm in diameter in concrete and brick, 13mm in steel and 30mm in wood. The tool features spindle reversing, gradual speed adjustment and an on/off switch lock for continuous operation. When drilling, the hammer drill reaches up to 1,350 revolutions per minute and up to 5,500 strokes per minute when switched to impact. The tool's percussion energy is 2.8 J. The tool's comfortable main handle is covered with a non-slip pad, so it fits well in the hand. An additional drill bit, drill chuck, chuck adapter and carrying case are included. The unit is equipped with a flexible and durable 3 m rubber-coated power cable, also dedicated to professional and industrial applications, both indoors and outdoors. Compliance with European standards is ensured by CE certification.
The bag-type filter for 59G613, 59G613-144 by GRAPHITE is a bag-type filter for use with the 59G613 GRAPHITE industrial hoover model. It is characterised by its dimensions: diameter 14 cm and length 17 cm. Allows you to protect the device from dust particles and other debris.
The flexible connection hose - 1.5/4.5 m (closed, working) for 04-738, 04-739, 04-738-147 by NEO TOOLS is a flexible hose dedicated to industrial hoovers numbered 04-738 and 04-739, characterised by an extendable length from 150 cm to a maximum of 450 mm and a diameter of 35 mm. It is a high quality accessory from the NEO TOOLS brand.
Round trimmer line diameter 2.4 mm, length 15 m, 07-102 by NEO TOOLS is a round trimmer line for universal use, characterised by a diameter of 2.4 mm and a length of 15 m. This NEO TOOLS brand line is a guarantee of high quality and appropriate durability.
The foam filter for 04-739, 04-739-30 by NEO TOOLS is a filter designed for hoover model number 04-739 and is characterised by its dimensions - 16 cm long and 15 cm wide. Foam type filter.
The connection hose for 59G613, 59G613-147 by GRAPHITE is a hose dedicated to the industrial hoover number 59G613, characterised by a length of 150 cm and a diameter of 32 mm. A high quality accessory from the GRAPHITE brand.
The crevice nozzle (for 59G613, 59G614) 59G613-149A by GRAPHITE is a nozzle designed for industrial hoovers with part numbers 59G613 and 59G614. It is characterised by a diameter of 32 mm. Designed to remove debris from hard to reach areas.
The accordion filter (for 04-739) 04-739-146 by NEO TOOLS is a filter designed for an industrial hoover with catalogue number 04-739 by NEO TOOLS. The filter is characterised by its dimensions: inner diameter 12 cm, outer diameter 15 cm and height 14 cm. It is easy to replace and keeps the device in better condition for longer.
The accordion filter (for 04-738, 59G614) 04-738-146 by NEO TOOLS is a filter designed for an industrial hoover with catalogue number 04-738 NEO TOOLS and 59G614 GRAPHITE. The filter is characterised by the following dimensions: inner diameter 10 cm, outer diameter 13 cm and height 12 cm. It is easy to replace and keeps the machine in better condition for longer.
The 58GE106, 58GE106-24 Sprayer Nozzle Kit by GRAPHITE is a set of three components - a single round nozzle, a double round nozzle and a fan (flat jet) nozzle. It is dedicated to the 58GE106 sprayer by GRAPHITE. It offers a flow rate from 0.8 l/min (when using the single nozzle) to 1.3 l/min (when using the double nozzle). The nozzle opening is 1.6mm. This GRAPHITE-branded kit with nozzles of varying spray patterns is recommended for spraying protective substances and fertilisers in the garden or allotment, for example.
Foam filter (for 04-738, 59G613, 59G614) 04-738-20 by NEO TOOLS is a filter designed for hoover models numbered 04-738, 59G613 and 59G614. It is characterised by its dimensions - 13 cm long and 15 cm wide. Foam type filter.
