Kvaliteetsed elektrilised käsitööriistad, akutööriistad, puidu- ja metallitööpingid, generaatorid, keevitusseadmed tuntud brändidelt nagu Bosch, Holzstar, Holzkraft,Topex, Makita, Diager jpt.

02-56H536

The GRAPHITE impact bits (ref. 56H536) type PZ4, with a total length of 25 mm, are heavy duty bits designed for heavier work with high torques using screwdrivers or impact drivers. Made of high-quality S2 steel, which is characterized by increased flexibility and resistance to mechanical damage. The torsion zone, rotating under the influence of high torque, reduces the transmission of force, which makes the bit more resistant to breakage, and its service life is extended several times. The working tip of the tip guarantees a perfect fit. Convenient plastic box allows you to easily store the tips. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

9,30€

On request in weeks

Impact bit S2, 50 mm, PH1, 5 pcs

03-09575

The NEO impact bits (ref. 09-575) are a set of 5 professional PH1 impact bits with a length of 50 mm. They are designed for 1/4 ”screwdrivers. They have a system that protects them against slipping of the tip from the screw. The bits are made of S2 steel. They enable a high tightening torque of 21.8 Nm. The torque absorption system protects the tips against quick wear and significantly extends their service life.

6,10€

On request in weeks

Impact bit TX27 x 50 mm, 2 pcs

02-56H527

The GRAPHITE impact bits (ref. 56H527) type TX27, with a total length of 50 mm, are heavy duty bits designed for heavier work with high torques using screwdrivers or impact drivers. Made of high-quality S2 steel, which is characterized by increased flexibility and resistance to mechanical damage. The torsion zone, rotating under the influence of high torque, reduces the transmission of force, which makes the bit more resistant to breakage, and its service life is extended several times. The working tip of the tip guarantees a perfect fit. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

3,10€

On request in weeks

Hammer drill SDS+ 900W, case

02-58G860

The SDS+ 900 W, 4J 58G860 impact hammer by GRAPHITE is a specialist 900 W SDS+ 3-function tool that is indispensable for installation and demolition work.

It has drilling, impact and a shoring function, needed when chipping plastered or tiled surfaces.

The maximum percussion energy is 4 J, giving the unit an advantage when tackling concrete, stone or brick.

The maximum percussion rate at nominal speed is 3850 min-¹, and the maximum drilling speed is 980 min-¹.

The two-finger switch contributes to its comfort. The flexible, robust power cable is in a 4 m rubber sheath and is dedicated to both professional and industrial indoor or outdoor use.

The hammer is offered with: drill bit, pick, mounting key, swivel auxiliary handle, drilling depth stop with tool-free length adjustment, lubricant reservoir and practical carrying case.

CE certification ensures compliance with European standards.

124,20€

On request in weeks

Stirrer 580 x 120 mm for 58G789, quick lock, 2 pcs

02-56H710

Mixing paddle 580 x 120 mm, quick lock, designed for mixing thick and thin gypsum mass, adhesive mortars or paints.

27,90€

On request in weeks

Impact bit S2, 50 mm, T20, 5 pcs

03-09584

The NEO impact bits (ref. 09-584) are a set of 5 professional T20 impact bits with a length of 50 mm. They are designed for 1/4 ”screwdrivers. They have a system that protects them against slipping of the tip from the screw. The bits are made of S2 steel. They enable a high tightening torque of 21.8 Nm. The torque absorption system protects the tips against quick wear and significantly extends their service life.

6,10€

On request in weeks

Impact magnetic bit holder, 60 mm

02-56H554

Holder for GRAPHITE impact bits (ref. 56H554) with a total length of 60 mm. Designed for heavier work with high torque using screwdrivers or impact drivers. Made of high-quality S2 steel, which is characterized by increased flexibility and resistance to mechanical damage. The magnetic tip prevents the bit from falling out during the work. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

4,10€

On request in weeks

Impact bit SL6.5 x 25 mm, 2 pcs

02-56H511

The GRAPHITE impact bits (ref. 56H511) type SL6.5, with a total length of 25 mm, are heavy duty bits designed for heavier work with high torques using screwdrivers or impact drivers. Made of high-quality S2 steel, which is characterized by increased flexibility and resistance to mechanical damage. The torsion zone, rotating under the influence of high torque, reduces the transmission of force, which makes the bit more resistant to breakage, and its service life is extended several times. The working tip of the tip guarantees a perfect fit. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

2,10€

On request in weeks

Screwdriver bit PZ2 x 6.35 x 300 mm, 1/4"

02-56H573

Screwdriver bit PZ2 x 6.35 x 300 mm, 1/4" 56H573 by GRAPHITE is a PZ2 screwdriver bit of 6.35 size and 300 mm length. Mounted on a ¼" thread. It has high resistance to deformation and is recommended for high frequency work. The element is made of S2 steel. The tip is recommended for POZDIRIV type screws and will prove useful in every professional and DIY workshop.

5,00€

On request in weeks

Blades for plane for 59G680

02-59G680-30

Blades for planer, length 110 mm, for 59G680

11,40€

On request in weeks

Electric hand trimmer router 510W, 6-8 mm

02-59G718

GRAPHITE edge trimmer (ref. 59G718) with 510W and 6-8 mm handle is designed for fine profiling work on edges. The ergonomic and soft grip handle, soft grip overlay and low weight make the trimmer easy and pleasant to work with. The trimmer is adjustable in working depth. The transparent base plate of the trimmer ensures visibility of the cutter and the work piece.

Set includes: 2 spanners, 2 router bits, 3 collets, 1 guide sleeve, 1 guide bar, 1 copying bar, 1 copying bar.

66,50€

On request in weeks

Impact bit TX40 x 25 mm, 2 pcs

02-56H517

The GRAPHITE impact bits (ref. 56H517) type TX40, with a total length of 25 mm, are heavy duty bits designed for heavier work with high torques using screwdrivers or impact drivers. Made of high-quality S2 steel, which is characterized by increased flexibility and resistance to mechanical damage. The torsion zone, rotating under the influence of high torque, reduces the transmission of force, which makes the bit more resistant to breakage, and its service life is extended several times. The working tip of the tip guarantees a perfect fit. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

2,10€

On request in weeks

Rotary hammer drill SDS+ 710W, 2.6 J, case

02-58G537

GRAPHITE's SDS+ 710W, 2.6J, case 58G537 hammer drill is a 710W specialist SDS+ tool with drilling, hammer drilling, shoeing functions and an infinitely adjustable chisel angle for precision shoeing. It can drill holes up to 24mm in diameter in concrete, 13mm in steel and 30mm in wood. The tool features spindle reversal with no loss of power at left-hand speeds and an on/off switch lock for continuous operation. When drilling, the hammer drill reaches up to 1,350 revolutions per minute and up to 5,500 strokes per minute when switched to impact. The tool's percussion energy is 2.6 J. The tool's comfortable main handle is covered with a non-slip pad, so it fits well in the hand. The kit includes a concrete drill bit, drill chuck, chuck adapter and carrying case. The unit is equipped with a flexible and durable 3 m rubber-coated power cable, also dedicated to professional and industrial applications, both indoors and outdoors. Compliance with European standards is ensured by CE certification.

95,41€

On request in weeks

Screwdriver bits PH2 x 25 mm, 20 pcs

02-57H955

GRAPHITE screwdriver bits are made of durable S2 steel that ensures long service life. Convenient, plastic case allows for easy storage of bits inside a tool box. 20 pcs of one size bits are used for tasks that require doing large quantities of screws in series (e.g. fixing plasterboards).

5,39€

On request in weeks

Impact bit HEX6 x 25 mm, 2 pcs

02-56H509

The GRAPHITE impact bits (ref. 56H509) type HEX6, with a total length of 25 mm, are heavy duty bits designed for heavier work with high torques using screwdrivers or impact drivers. Made of high-quality S2 steel, which is characterized by increased flexibility and resistance to mechanical damage. The torsion zone, rotating under the influence of high torque, reduces the transmission of force, which makes the bit more resistant to breakage, and its service life is extended several times. The working tip of the tip guarantees a perfect fit. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

2,10€

On request in weeks

Impact bit PH1 x 50 mm, 2 pcs

02-56H518

The GRAPHITE impact bits (ref. 56H518) type PH1, with a total length of 50 mm, are heavy duty bits designed for heavier work with high torques using screwdrivers or impact drivers. Made of high-quality S2 steel, which is characterized by increased flexibility and resistance to mechanical damage. The torsion zone, rotating under the influence of high torque, reduces the transmission of force, which makes the bit more resistant to breakage, and its service life is extended several times. The working tip of the tip guarantees a perfect fit. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

2,60€

On request in weeks

Hand tap M3, DIN 352 3pcs. in plastic box

01-14A203

TOPEX taps (ref. no. 14A203) are used to cut internal threads. Made of high quality tungsten steel. Compliance with DIN 352 guarantees reliability of the product. TOPEX brand is oriented towards DIY enthusiasts.

3,20€

On request in weeks

Impact bit S2, 50 mm, PH2, 5 pcs

03-09576

The NEO impact bits (ref. 09-576) are a set of 5 professional PH2 impact bits with a length of 50 mm. They are designed for 1/4 ”screwdrivers. They have a system that protects them against slipping of the tip from the screw. The bits are made of S2 steel. They enable a high tightening torque of 21.8 Nm. The torque absorption system protects the tips against quick wear and significantly extends their service life.

6,10€

On request in weeks

Universal socket 7 - 19 mm, 1/4"-3/4"

02-55H224

Universal socket 7-19 mm, 1/4"-3/4", 55H224 by GRAPHITE is a set of socket wrench and extension/adapter. The tools allow you to easily unscrew machined nuts or wedge. Socket in hexagon type, designed to work with the size range of 7-19 mm. An indispensable product in every workshop.

9,00€

On request in weeks

Impact bit S2, 50 mm, PH3, 5 pcs

03-09577

The NEO impact bits (ref. 09-577) are a set of 5 professional PH3 impact bits with a length of 50 mm. They are designed for 1/4 ”screwdrivers. They have a system that protects them against slipping of the tip from the screw. The bits are made of S2 steel. They enable a high tightening torque of 21.8 Nm. The torque absorption system protects the tips against quick wear and significantly extends their service life.

6,10€

On request in weeks

Электроинструменты и аккумуляторные инструменты, с