Электроинструменты и аккумуляторные инструменты, с

Masonry drill VERTO (ref. no. 60H630) with SDS+ shank 12.0 mm diameter, tip with fine grit sintered carbide allows to efficiently drill holes in concrete. Double S4 flute ensures proper drillings extraction and protects the drill against overheating. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.

Sanding cloth GRAPHITE (ref. no. 55H868) in a roll, 2.5 m long, 115 mm wide and granulation 60. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive cloth with J-cloth backing designed for mechanical and manual grinding. The cloth’s close coating (100% of the cloth surface is covered with abrasive grain (alumina)) guarantees greater processing accuracy and the highest efficiency when processing hard materials. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

Fibra sanding disc GRAPHITE (ref. no. 55H851) with outer diameter 125 mm and granulation 60. Dedicated to grinding metal, steel, plastic, wood and even finishing putty. Ideally suited for deburring, removing rust and processing of welds. The disc with close coating. 100% of the disc surface is covered with abrasive grain (alumina), which guarantees greater processing accuracy and increased working efficiency. The disc is mounted to an angle grinder using a dedicated flexible disc. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

Võrklihvketastel on väga hea tolmueemaldus, sest tolm liigub läbi võrgu, mitte ei ummista pinda. Vähem lenduvat tolmu ja parem nähtavus lihvimisel.

HSS metal drill bit, 4.0 mm, 10 pcs, steel 4241, point angle 118°, shear adjustment, DIN338

HSS metal drill bit, 3.0 mm, 10 pcs, steel 4241, point angle 118°, shear correction, DIN338

Sanding paper GRAPHITE (ref. no. 55H887) in a sheet with dimensions 230 x 280 mm and granulation 80. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with C-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (alumina)) guarantees greater working efficiency and reduces the risk of clogging. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

GRAPHITE guide rail enabling parallel penetration of the cutting disc and free and even guidance of the saw-digger. The high-quality aluminum strip is equipped with a rubber anti-splinter insert, teflon slides, and a special anti-slip tape mounted on the underside of the strip, which significantly increases comfort and safety of work. On the first use, the rubber bar will automatically adjust to the tool used. It is possible to attach the rail to the surface using dedicated clamps, which allows precise and accurate cutting of the material. The attached strip to the cut surface allows the user to focus on the work to achieve the desired cutting effect. Thanks to specially profiled grooves, the clamps do not interfere during work. The guide rail is dedicated for use together with the GRAPHITE circular saw

A set of HSS-CNC twist dril GRAPHITE (Ref. 55H090) with diameters ranging from 1.0 to 13.0 mm, made of high-alloy high speed steel using CNC machining. Ideally suited for drilling precise holes in all types of metals.

GRAPHITE abrasive papers are used for rough sanding of wood and metal surfaces. Hook and loop fastener allows for quick replacement of worn out paper. Holes allow for nearly dust-free operation with tools equipped with dust extraction system.

Solid carbide saw blade GRAPHITE (ref. no. 55H607) with diameters 315 mm, made of MN65 manganese steel alloy with high resistance to temperature and deformations. Teeth with sintered carbide tips YG6A are designed for rough cutting of wood and wood like materials, like plywood, chipboard, MDF. Thanks to included adapter rings it is possible to use the blade in most of saw models.

Sanding paper GRAPHITE (ref. no. 55H865) in a roll, 2.5 m long, 115 mm wide and granulation 180. Dedicated to grinding gypsum, finishing putty, wood, paint and varnish. The abrasive paper with D-paper backing designed for mechanical and manual grinding. The paper’s open coating (50-60% of the paper surface is covered with abrasive grain (white fused alumina)) guarantees greater resistance of the grain surface to clogging with abrasive dust . The product designed to be used with orbital grinders and sanding trowels. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

Set of flat wood drills VERTO (Ref. 60H804) with diameters from 6.0 mm to 25 mm, thanks to the special profile blades allow double the drilling speed and avoid the effect of pulling the material. Hexagonal grip, allows the use in magnetic holders in cordless drills.

Sanding cloth GRAPHITE (ref. no. 55H873) in a sheet with dimensions 230 x 280 mm and granulation 36. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive cloth with J-cloth backing designed for mechanical and manual grinding. The cloth’s close coating (100% of the cloth surface is covered with abrasive grain (alumina)) guarantees greater processing accuracy and the highest efficiency when processing hard materials. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

Blade for reciprocating saw GRAPHITE about the length 228 mm and 6 with teeth an inch long used for cutting fiber-cement, plasterboard, concrete, fiberglass and resin reinforced composites with saber saws. The maximum thickness of the materials is 175 mm. It is used in renovation, construction and demolition works as well as in home amateur work. It enables straight cutting. The saw blade produces less dust when cutting compared to traditional methods. Enables cutting close to the edge and in hard-to-reach places.

Delta sanding paper GRAPHITE (ref. no. 55H767), size 93 x 93 mm and granulation K120. Dedicated to grinding wood, wood-based materials, metals and plastics. Hook and loop fastener allows for quick replacement of worn out paper. Holes allow for nearly dust-free operation with tools equipped with dust extraction system. Product with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

Velcro sand paper GRAPHITE (ref. no. 55H779) with granulation K80 i diameter 225 mm, used for grinding gypsum surfaces with extension grinders. The discs have perforated holes on the entire surface, thanks to which the sanding dust is easily drained. Velcro fastening allows quick replacement of used abrasive disc. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

Sanding paper GRAPHITE (ref. no. 55H891) in a sheet with dimensions 230 x 280 mm and granulation 180. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with C-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (alumina)) guarantees greater working efficiency and reduces the risk of clogging. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

VERTO bimetal hole cutter diameter 83 mm with progressive teeth made of high speed steel allows for efficient cutting of precise holes in steel, stainless steel, wood, plastics and composite materials. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.

Sanding paper GRAPHITE (ref. no. 55H889) in a sheet with dimensions 230 x 280 mm and granulation 120. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with C-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (alumina)) guarantees greater working efficiency and reduces the risk of clogging. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.