Электроинструменты и аккумуляторные инструменты, с

Sanding paper GRAPHITE (ref. no. 55H752) with dimensions 93 x 230 mm and granulation 180, with holes. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging . Designed for mounting on orbital grinders. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

Water abrasive paper GRAPHITE (ref. no. 55H899) in a sheet with dimensions 230 x 280 mm and granulation 120. Designed mainly for wet varnish and plastic grinding applications in automotive industry as well as wood and metal processing. The abrasive paper’s backing is a very flexible latex paper which perfectly adapts to the workpiece. Close coating (100% of the paper surface is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

GRAPHITE screwdriver bit set includes the most popular sizes and types of bits 1/4" x 25 mm. Special storage box design allows to fix it on a tool belt as a bit clip. Access and replacing bits is considerably easier thanks to the system for picking and putting bits with one hand. Coloured sleeves for bit types allow to easy identify required bit.

GRAPHITE abrasive papers are used for rough sanding of wood and metal surfaces. Hook and loop fastener allows for quick replacement of worn out paper. Holes allow for nearly dust-free operation with tools equipped with dust extraction system.

Metal drills GRAPHITE (ref. no. 57H036-10) with diameters 5.5 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.

GRAPHITE segmented diamond disc thanks to hot pressed segments is perfect for heavy duty construction tasks. Highly resistant diamond segments allow for efficient cutting pieces made of concrete, reinforced concrete, granite, marble, stone, brick etc.

Blade for reciprocating saw GRAPHITE about the length 150 mm and 3 with teeth an inch long intended for cutting, among others thick wood, pruning branches and bushes with saber sawsintended for cutting, among others thick wood, pruning branches and bushes with saber saws. The maximum thickness of the materials is 100 mm. It is used in renovation, construction and demolition works as well as in home amateur work. It enables straight cutting. The saw blade produces less dust when cutting compared to traditional methods. Enables cutting close to the edge and in hard-to-reach places.

Sanding cloth GRAPHITE (ref. no. 55H876) in a sheet with dimensions 230 x 280 mm and granulation 80. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive cloth with J-cloth backing designed for mechanical and manual grinding. The cloth’s close coating (100% of the cloth surface is covered with abrasive grain (alumina)) guarantees greater processing accuracy and the highest efficiency when processing hard materials. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

Metal drills GRAPHITE (ref. no. 57H026-10) with diameters 4.2 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.

GRAPHITE Turbo wave diamond disc thanks to hot pressed Turbo type segments is perfect for heavy duty construction tasks. Special profile of disc considerably improves cooling during operation for longer service life. Highly resistant diamond segments allow for efficient cutting pieces made of concrete, reinforced concrete, granite, marble, stone, brick etc.

GRAPHITE continuous diamond disc thanks to hot pressed continuous segment is perfect for heavy duty construction tasks. Highly resistant diamond segment allows for efficient cutting ceramic pieces, like terracotta, gres, granite, marble.

Võrklihvketastel on väga hea tolmueemaldus, sest tolm liigub läbi võrgu, mitte ei ummista pinda. Vähem lenduvat tolmu ja parem nähtavus lihvimisel.

Masonry drill VERTO (ref no. 60H190) with 6.0 mm diameter. Tipped with fine grit sintered carbide and enhanced resistance to high temperature. Grinded drill flute reduces drilling forces. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.

GRAPHITE WIDIA Saw and Plunge Blade (Ref. 55H687) 165mm outside diameter, made from C50 special steel with increased wear and warp resistance. Tungsten carbide teeth with ATB geometry (alternate) allow precise cutting of wood and wood based materials such as plywood, chipboard, MDF. The included reduction rings allow the blade to be used with most saw models. The GRAPHITE brand offers a wide range of power tools to meet the needs of professionals.

Masonry drill VERTO (ref. no. 60H641) with SDS+ shank 12.0 mm diameter, tip with fine grit sintered carbide allows to efficiently drill holes in concrete. Double S4 flute ensures proper drillings extraction and protects the drill against overheating. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.

GRAPHITE bimetal hole cutter with progressive teeth made of high speed steel allows for efficient cutting of precise holes in steel, stainless steel, wood, plastics and composite materials.

GRAPHITE sabre saw blades have teeth of high speed steel. Combination of high speed steel with chromium vanadium steel allows to use the blades for cutting of all pieces made of steel, stainless steel, plastic and wood. Combination of these two steel types guarantees unique blade flexibility, which allows to work with bent blade. Therefore, it is possible to make cuts in hard to reach areas.

VERTO bimetal hole cutter diameter 19 mm with progressive teeth made of high speed steel allows for efficient cutting of precise holes in steel, stainless steel, wood, plastics and composite materials. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.

Metal drills GRAPHITE (ref. no. 57H024-10) with diameters 4.0 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.

GRAPHITE bimetal hole cutter with progressive teeth made of high speed steel allows for efficient cutting of precise holes in steel, stainless steel, wood, plastics and composite materials.